J6480

Similar Questions

• All-in-one HP Officejet J6480: google cloud print

  I wonder how (or if) I can save my all-in-one HP Officejet J6480 printer use Googe Cloud Print?
  
  I had advanced under Chromebook settings then Google Cloud Print and when I click on manage printers he says there is no devices available and I want to register the device.

  Thanks for any help with this!

  Hello @CookinCo22 ,

  Welcome to the HP forum.

  I understand you're wondering if you can set your J4680 until chromebook.

  For a printer can be configured on Google Cloud Print, it must have the functionality of the web services.

  Unfortunately the J4680 doesn't have this feature.

  If you have a PC or a Mac, you can set up a conventional printer.

  The downside is that you should have the PC or Mac turned on to be able to print from the Chromebook.

  The positive side is that you can print your chromebook.

  I hope this helps you.

• OfficeJet J6480: Printer Test Page

  Connected OfficeJet j6480 for ACER PC with Windows 7 Home Premium.  Driver was installed for this system.  Cannot print from programs.  The diagnosis page prints ok but the test page does not print.  A ran the diagnostic test and passed all controls.

  Please note that the printer has been connected to a Dell Labtop with Windows 7 Professional and printed correctly.

  Hi @Tyrone_P

  I want to help you to be able to print to your Officejet J6480. Please follow the following steps and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop >OJJ6400_Full_13.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• J6480 all-in-One: J6480 bad LCD screen

  Love my J6480 old all-in-One.  Still works fine, BUT LCD screen has become barely legible.  Strongly limits the use of the features on board.  I would like to replace the LCD screen.  This user is feasible?  Not a ton of HP74/75 cartridges, so don't want to get new printer that uses different.  For a long time, out of warranty, so it's not a problem, to the extent where I enter the inside of the case.

  Thanks for any advice,

  Jim

  Hi there Jim, aka @JimHCNMT

  Unfortunately, the screen is non-replaceable. If you are looking to solve the problem, I would say the steps located in the guide below.

  The HP printer won't turn on or respond when the power button is pressed

  If you wish, you can definitely give us a call to see about your replacement options!

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy holidays

• J6480: duplexing on j6480

  Since installing win 10 win 7 duplex printing does not work on my J6480 all in one. I have the last available at HP installed software HP, but still no luck. I checked all the usual suspect as a control to ensure that the function has been enabed and it is still not working. Does not print a face. Someone at - it other ideas or is this printer just too outdated to work properly? Like I said worked as advertised with win 7. Thank you

  To deny any possible hardware problem, try to copy a duplkex work by pressing the copy menu and double copy layout, then make a copy.

  If it fails also try removing and reconnected the duplex unit and check for the difference, made me know if you still encounter additional problems when copying.

  If the copy work, try to set another pilot as follows:

  1. In Control Panel, select devices and printers.
  2. Right click on the printerand, select printer properties.
  3. The Advanced tab click new driver.
  4. Follow the steps and select HP and the HP Deskjet 6940 / 6980 printer.
  5. Complete the wizard and try to print using the printer updated, you will see no difference?

  Kind regards

  Shlomi

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• Software AIO HP J6480 problem, I think

  Having two computers:

  HP computer HP 8000 Elite SFF Core 2 Quad 2.83 GHz, 8 GB Ram, 750 GB HDD, DVD - RW, Windows 7 Professional (64 bit) - wired for computer / HP AIP

  HP ENVY laptop i5 WIN8.1 64-bit networking with HP AIO.

  When I bought the URGE, I installed the HP Solution Center AIO software and have installed v140.0.18.23.

  When attemption to access the J6480 of ENVY, I get a message that says, I need to reinstall the AIO software to make it compatible with 64-bit WIN8.1.

  I can however choose 'run' anyway and risk of compatibility problems.  If I run in any case, HP AIO seems to work very well.

  I tried to download the seemingly correct software on the following site, to remove the message:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3635378

  But nothing does not download from this site, and I am not prepared to uninstall software J6480 existing my DESIRE until I have a new driver on my laptop to install.

  Must I might uninstall?

  J6480 worked very well for my Wired HP ELITE desktop computer.

  Thoughts, please.

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  I downloaded the software HP Solution Center (HPSC) of your download of lin Thaks for this.

  As a reminder, the Assistant said driver software was up to date.

  What's happened is the software installed the HP Solution Center Bing toolbar (I clicked on the "add more software" only apparently viable option).  Another option was to uninstall and that do not make sense.  Would I have done that?

  Solution Center open and I checked, do not show warning / error again.

  So I decided to leave the shortcut to HPSC to pin to the taskbar, and it seems to work very well.

  And I have the software on my PC if I need to uninstall and reinstall same.

  As long as v140.0.18.23 is the current version of J6480 to WIN 8.1, then the question is / seems to be resolved.

  Will have access to the HPSC future from Pin to the taskbar.

  Thank you.

  Thank you.

• J6480 prints 'back to front' even if 'forward to the rear' is set as default

  My J6480 prints 'back to front' even if 'forward to the rear' is defined as a default value in the "printer settings" and "printing preferences".

  Suggestions?

  Hello

  You can try to disable the advanced default printer printing functionality
  * right click on the default printer that is your officejet j6400 series in printers and faxes (xp) or printers (vista) in the Control Panel window
  * Select Properties
  * Select the Advanced tab
  * removed check mark next to the advanced printing feature activate
  * hit apply, then press ok.
  * Try printing again

  Let me know if it works...

• J6480 HP: Duplexer J6480 HP has stopped working. Tab device settings comes back to the Duplex NOT INSTALLED unit.

  I rebooted the HP software on my Windows 7 PC.  As a result, device tab shows duplexer settings still NOT INSTALLED no matter what I do.  Before the PC software reload duplex printing worked perfectly.

  Hey @mjmorse00,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the all-in-one printer Officejet J6480 after reinstaling on your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If the printer is connected to the printer via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for any other icon of your printer listed.
  7. If you removed the USB cable, connect.
  8. Click on add printer and select your printer from the list.
  9. On the screen that asks you to select a driver for your printer, find the driver for Deskjet 9800.
  10. Continue adding a print to your printer queue.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• hinge left cover HP J6480 broken during the cartridge change. How I replace that?

  HP OFFICEJET J6480 ALL-IN-ONE. The left HINGE of the cover broke during the change of the cartridge.  How can I replace it?

  Thank you

  James

  @tyson1, you can give HP @8004746836 and see what options we have to replace or repair the unit.

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• Quality color, printing photos on OfficeJet J6480

  The color quality seems very poor, with a bluish tint. When printing photos on my OfficeJet J6480. Cartridges show plenty of ink. Any ideas?

  Thank you

  RV

  Hello!

  With this printer, I found this tree of the article:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=7423&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3635378

  Here I'd say work items on the colors bleeding into one another and any material to help get this resolved related.

  Typically, this can be solved by cleaning the print heads and contacts within the printer. Be careful when you perform these steps well and I would say following the guide carefully.

  I hope this helps!

• Can not reinstall the software J6480

  HP J6480, Windows 7. 32-bit.

  Have a reinstallng of time more difficult J 6480 software.

  I also get a message at the start that a file is missing: users\bobAppData\Roaming\sysprtj6.dll

  sysprtj6.dll cannot be foundanywhere on my computer.

  Can someone please send me this file?

  Also, I am confused as how to reinstall software j6480 and I tried all know installation to myself using the version to the United Nations from the original installer on the installation DVD.  Who is UNINSTALL, UNINSTALL L1, UNINSTALL L2, L3 of UNINSTALLING and using DO NOT UNINSTALL L4.

  This has caused me a lot of hours of installation / reinstallation of the software only to have it crash in the middle of the installation.

  The reason for the relocation is that a Windows UPdate yesterday, my AIO started printing on its own even when nothing was in the print spooler.  The page printed with a small 1/4 or @ sign or such a thing in the upper right corner and these pages with only the symbol several times printed on each page.

  So I uninstalled the J6480 software and reinstalled a file by downloading the latest version of "OJJ6400_Full_13", dated to August 2012.

  Any help will be greatly appreciated.

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  Since it is a HP site, it seems reasonable to assume that this is an HP product, which is.  Another tech sent me and it solved my problem.  Thank you for your interest.

   

   

   

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79309-1&cc=us&DLC=en&LC=en&... =

  10. run the download to reinstall the printer

  I am an employee of HP.

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• officejet j6480 again router wireless connection

  We have a j6480 officejet all-in-one and we have recently changed wireless routers and now computers can not find the wireless printer. How do we get computers to recognize the printer or vice versa. Thank you

  The printer can be associated with the new router with the wireless configuration wizard.  Press the setup button and navigate to the network and then the wireless configuration wizard.  You must know the SSID of the new router and also all security settings.

  Another method is to use the CD of the software on the computer:

  http://support.HP.com/us-en/document/c01311135

  Have set you or change the default SSID and security on the new router settings?