Jobs do not print

Similar Questions

• "Laserjet 1022n Windows Update", causing problems printing: print jobs do not print

  Hello

  A few days ago I installed upgrading Windows Laserjet 1022n on my Windows 7 64 bit and since then I can not print a page normally: the page does not print. I use a TCP/IP network port.

  I made several attempts to resolve this problem:

  -uninstall the printer driver and install it again (I tried the latest version on the HP site and an older one that worked perfectly before)

  -update the firmware of the printer to the latest version on the HP site.

  When I put the printer in pause and start the print job, you can see in the list. Resumption of the printer, printing starts on the printer but you see that the job remains in the list, flashes again and again. The printer keeps printing the same page.

  I don't know what I can do to solve this problem. There is no way to uninstall the update of the HP Laserjet 1022n software because it does not appear in the list of installed programs (course list is also op updates from windows updates).

  I have same problem printing to the same printer from another PC Windows 7 (with the same windows update done)

  But I have no problem printing with my laptop on an other network printers.

  Is there someone who has the same problem and how to solve?

  Thank you for answer

  I found the solution on this site: http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing

  Just uncheck the chekbox "enable two-way communication" on the "Ports" tab of the properties of the printer and it works normally again!

• Completed tasks remain in the queue, subsequent job does not print.

  Queue says 100%, but it never goes away.  If I put the computer to sleep, it prints a second copy of the work "completed" (even if only one has been specified.  If I have a second job in the queue, it does not print until I have manually delete one (a troublesome task with several jobs to print).

  I tried a few suggestions that I found these boards of Directors, including the removal and re-adding the printer, printing (Option-click) system reset, unplug the power cord and plug and unplug the USB cable and reconnect.  None of these things has eliminated the problem.

  I can impose by the experts here to suggest something that I might have missed?

  Photosmart Premium C310

  Driver version 4.1.2

  Mac OS 10.9.4

  I recommend you only uninstall the HP software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• HP Designjet 500 42 "do not print

  Looking for help with my HP plotter. Recently, I replaced the service station and print transport. I also downloaded the driver (Driver HP DesignJet 500 PCL3GUI 32-bit) and firmware (series of printer HP Designjet 500, 510 and 800 Firmware Upgrade) to new pc XP from the original pc used for printing crashed. The printer displays indication normal and says ready for jobs however when I send a print to the printer it just shows treatment work and transport movements feeling left right at a few times, but the jobs do not print. Also, it seems to stay forever in this (suspended) mode and I have to power the printer off to return to the normal screen ready.

  What is a driver/firmware issue or hardware?

  If I try to print a configuration page it also does the same thing.

  Thanks in advance.

  Jacob

  It is a thin cable error. The ends of the cable have questions or it is not completely sitting in the cart. I guess the cable could be as bad.

• not printing from the internet

  My hp envy 5532 won't print on the internet. Other printing work directly to my computer using a USB stick as had many wireless connection problems

  Hi oskar8,

  Thank you for your response. It is appreciated.

  I suspect you are trying to print from the browser Chrome and your print job is not printing. I have two recommendations for you to try. The first is to disable the blocker on Chrome. I've included Manage pop ups of Google. If you still encounter problems printing of Chrome, please disable Viewer PDF of Chrome. I have included CNET How to disable PDF from Chrome Viewer.

  If you use chrome and still have questions, please let me know.

• Does not print unless I refresh the web page of the printer

  Photosmart Premium CN503A with iMac OS 10.7.2.  Driver deleted and reinstalled through system preferences > print and scan.  The printer made a kind of upgrade software wireless this week.  (However, the problem before this event).

  The printer, close the iMac and the router does not work for print orders.   The print queue log shows that the printer is connected, but the jobs do not print.  Finally, without printing, the connection returns to idle.  I can get the printer to answer by clicking printer setup > Show printer web page.   Stop the printer and I must refresh the web page several times before the printer has finally complete the work.

  I am very disappointed by this printer.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Envy 4500: Print jobs disappear from the print queue and not print (Windows 7).

  I just bought a HP Envy 4500 printer,

  When you attempt to print from a PC with windows 7 OS home pro (64-bit), the print job appears in the queue and then disappears, but the printer does not print anything.

  Everything else seems to work very well know

  • The printer prints the internal test page
  • The printer does print when you use iPad2
  • The printer does print when you use ePrint
  • The PC recognizes and communicates with the printer (tried with USB connections and wireless)
  • Analysis feature works very well - when initiated from the PC and printer

  I tried

  • uninstalling and reinstalling the software (several times using software from different sources)
  • restart the printer queue service
  • Disabling the firewall
  • running printing HP and doctor Scan
  • following the instructions described here (the question is the same but the different operating system):

  Print jobs disappear from the print queue and print (Windows 8)

  • combinations of all of the above

  Absolutely no joy in any of them, and in spite of more than 2 hours of research on Google and forums search I can't find a solution.

  HP... can you give me a solution or is that goes back to the shop?

  Well I finally worked on the fix myself by trial and error.  I changed the security settings for 'All' and 'Creator owner' to 'Print' and "Administer Documents".  Why on earth they were not automatically allowed as part of the installation, I couldn't really say.

  Hope this helps someone else with a similar problem.

• How do U get rid of an element of U, sent to a printer dell 305? I tried to cancell the print job because apparently, he hung up and will not print, but I can't get out of the what.

  I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?

  Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.

  Hi, dadzippytr,

  Click Start and type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Control Panel > printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the window

  Start > right click on computer

  Click on manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printers

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the drivers

  Go to the manufacturer's website and search for updated drivers

  Don't forget to come back to services and start print spooler before printing again.

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Print job application print but does not print to my printer Dell946

  Print jobs appear in the print request, but do not print for my Dell 946 printer

  robertarussell,

  How did you install the printer?

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 946 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also next time you print from Microsoft Word, Adobe Reader, etc., click on file, print, and make sure that the appropriate printer is selected.

  Rick

• His stats EPSON WF - 2540 Series Job will not stop printing

  Printer EPSON WF-2540 Series - 60B 384 =

  OS = Windows 8 Blue 6.3.9600

  Driver HP series class driver is;. version 63.1303.3.00

  Problem:

  In the process of printing a form (PDF) from the internet the printer began to print attributes task rather than the content of the form and it does not block the stats to print again and again.  I removed the device and reinstalled.  I turned the printer and unplugged.  I have reset the default printer.  There are no jobs in the spooler.  If we create a print job with the printer off we get this printed work and then the stats for internet PDF starts printing.

  EXAMPLE OF STATS in EMPLOYMENT from line 1

  12345X@PJL set stringcodeset = UTF8

  @PJL COMMENT = "" job start time: Sun Oct 05 14:11:02:658 2014 ""

  @PJL JOB NAME = "460int".

  These work instructions continue for a third of a page, while the rest is filled with a repeated sequence of "0W0V".

  Any help is appreciated.  TKS

  Thanks for the reply.  With my wifes computer is turned off, I accessed my office printer and the printer performed as intended.  When I turned on the laptop, the problem as described in the report began.  This has isolated the problem to his computer.  I've stopped and started the spooler service and the problem continues.  Finally, I find the spooler files in C:/windows/system32/spool/printers and erased.  My wife has printed several docs now and the problem seems to be resolved.

  Thanks again for your attention.

• Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Hey Joe,

  Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.

  Also refer to:

  Cancel printing

  Maybe you have that impression break.

  View, pause, or cancel printing

  You can also see the troubleshooting steps in Dell for Dell printers.

  Please post back with the State of the question.

• print jobs in the queue from the computer to the top, but do not print

  1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

  chrismcgo wrote:

  I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

  I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.