Keyboard combo which shuts the Synaptics ClickPad?

Similar Questions

• Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Open KBSC and type UP (or DOWN) in the search.

• Cannot change scroll setting reverse two fingers on Acer Aspire Synaptics ClickPad V8.1

  Hello

  I just got an Acer Aspire (excellent camera) with the intuitive two fingers scrolling on the Synaptics ClickPad V8.1, so I tried to reverse the trend. I went to the Synaptics Touchpad settings and then went to the settings on two fingers scrolling, but could only check/uncheck the first two above (select vertical and horizontal allow)-the rest was just gray and could not be clicked.
  Did everything back to default and even created new profiles to see if I could change it then, but nothing helps. I may not have rights (Administrator) to change? Before I installed Windows 8 running.
  Please advise and thank the community in advance.
  Concerning
  Marco

  I found the resolution on a post about another Acer laptop model.  It is real simple but I had technical support at acer ready to elevate my status of support at level-2.

  1.) Control Panel > hardware and sound > mouse

  2.) on 'device settings' tab, click 'Settings' button

  3.) under 'Extra features', uncheck the option 'Zoom perfect.'

  What are the features were previously unavailable for the setting (for example two fingers to scroll, Pinch Zoom, etc.) are now available to be adjusted.

• HP ENVY notebook - m7-k211dx: Synaptics ClickPad will not be disabled. Reactive after reboot.

  Whenever I have disable Synaptics ClickPad using the option 'disable the internal pointing device when external USB pointing device is attached', it works fine until I restart. When I return in the options, it is still once unchecked. I tried to turn off the drivers, but they are grey, but wan't to avoid this meathod ultimately because it is not ideal for me.

  Action taken:

  • Update to the latest drivers.
  • Disable the cache and history cleaning software.
  • Try different USB ports.

  (That's fine, but when I restart it unchecks itself)

  

  Thanks, Mike

  Mike,

  Sorry it took me awhile. I have all the "Nitty Gritty" details if you want, but the "net-net" is the update of this option writes in "HKCU" and there is a "HKLM" in the register which is default location and never changes.

  I managed to do that work by changing the corresponding section of HKLM in the registry. It not be "rejected" at each logon as the HKCU section seems to be. The ICON remained "hidden" which is what I wanted to happen with the change below.

  Try this and see if it works for you!

  1. open Regedit.exe

  2. go to the location next to the register:

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnh

  3. Note the REG_DWORD value named - TrayIcon

  4. the numbers of data match this way:

  0 x 0000001 (1) DEFAULT = which is the active ICON

  0 x 0000011 (17) = animated ICON

  0 x 00000021 (33) = disabled ICON

  5. change it to what you have been wishing, in my case it was 21 Hex or Dec 33 for DISABLED ICON.

  6. exit Registry Editor

  7. restart to test or log-off/log-on to test.

  NOTE: If REG_DWORD is not here, it is probably safe to add it, but in my case it was already there it was just the value 1 and never changed when I changed the settings. Only the section HKCU did who has always retired at the end of my session when I disconnected or restarted.

  Let me know the results! I hope it suits it for you!

  Edward

• HP Pavilion 17 Notebook PC - Synaptics Clickpad has stopped working

  Hello

  I got my HP laptop for a little over a month now, a week ago, my Windows 8 made a update, I rebooted my computer and all of a sudden my Synaptics Clickpad stop job.

  I literally tried everything to solve this problem. I went through my laptop settings and my clickpad is not to see the like shut off, I disabled and allows him to make sure. I ended up finding a new driver Synaptics by HP.com, I installed it and my clickpad started working again. I restarted my computer and was able to use my clickpad on the login screen, but once that I logged it disappeared again. I tried to go through all the possible settings and there is nothing that solved my problem.

  Some help would be appreciated, it's very disappointing because I've only had this laptop for a month and having to return it would be even more disappointing.

  My laptop is a:

  HP Pavilion 17-f084ca Notebook PC (ENERGY STAR)

  8.1 Windows 64-bit

  Product number: G6R4OUA #ABL

  Before the problem occurred: Windows 8 through Windows Update update

  Problem post: driver Synaptics updated through HP.com, scanned troubleshooting my computer through HP.com and check many areas. Nothing has solved the problem.

  Hi @DawnK ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• When firefox redirects and asks 'allow', which is the essential feature 'allow' compared to having to use the mouse to go up to the right and click on allow all the time?

  Firefox for mac tells me often (for security reasons I've enabled in preferences) that "firefox prevented this page automatically redirecting to another page. To 'allow', I have to move my mouse to the right of the screen and click "allow." There are not the essential functions, which is the same as the click of a mouse? With the help of the mouse is slow and takes off the navigation on productivity.

  You should be able to support on the a key to do so.
  
  The underlined characters informed program buttons the user that these characters are the keyboard shortcut.

• HP ENVY m6-1254eo Notebook PC: unable to connect to the Synaptics Pointing Device Driver

  Dear community of Hp,

  I had a problem with my hp envy, which occurs a few weeks previously and now has decided to post here in the forum hp laptop because

  no solution can be found on the internet. Ive done a lot of research and try but nothing happens.

  I knew that the Synaptics Touchpad no longer works. I tried to uninstall and reinstall the driver, but I do help. I still see the touchpad in the listof material and devices.  And every time that select the properties of the mouse it still appears the message like this unable to connect to the Synaptics Pointing Device Driver, if you have installed a different ps 2 device driver scoring please uninstall the synaptics using the Yes button.  You must then reinstall your device external device driverfor score again. 

  In the control panel > Device Manager > display hidden devices under the mouse and other pointing device, there is a yellow triangle on the HP TOUCHPAD SMBUS.

  I really need your hp experts helps solve my laptop problem.

  Thank you in advance.

  Hi @topzias,

  Thank you for the update.

  Would you be so kind as to post what worked for you in the public forum, where others can see it and maybe help?

  Cheers to you and thanks in advance

• External keyboard works only after the restart with Port Replicator III Plus

  The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

  This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

  Hello

  It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?

• Synaptics clickpad fix - need driver windows 10 pilot with gestures

  Hello

  I just upgraded to windows windows 10 8, then I have experinced the compatibility problems with the touchpad driver. I have uninstalled and installed a new driver link on another HP forum. The new driver fixed the problem and regained the touchpad abilty, but the new driver installed do not have all of the same commards as the use of two fingers to scroll up and down or maximizing and minimizing the use of two fingers on the touchpad. Does anyone have the link to download the new clickpad synaptics with the same functionality?

  Hello

  Try the following.

  Download the Setup program of the Synaptics driver from the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71867.exe

  A when you're finished, open windows control panel, open programs and features, right click on the entry "Synaptics Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• TouchPad Driver installed, but the synaptic ClickPad not found

  I have a problem with my touchpad. I already install the synaptic Touch pad. The touchpad is not more intelligent (can not perform gestures / sensitivity adjustment).

  When will 'Control Panel' > 'Mouse', the "Synatic Clickpad" tab isn't there.

  Please answer as soon as POSSIBLE. TQ.

  Hello:

  See if you install the most recent driver directly from synaptics works.

  http://www.Synaptics.com/resources/drivers

• HP Envy 360, model 15-U363CL: Synaptics Clickpad setttings works does not properly in Windows 10

  Synaptics Clickpad v. 19.0.12.95 settings are not saved after Windows 10.  Every time I have stop and restart Win 10, I have to disable "TAPPING" I hate go in the settings of the mouse/clickpad.  Settings have been saved on close and worked well in Win 8.1.  HP needs to come with a new driver.   In the meantime, I guess I might have to go back to 8.1 win?

  Anyone else having this problem?

  Software and driver results for:

  HP ENVY x 360-15-u363cl (ENERGY STAR)

  Synaptics TouchPad Driver 18.1.7.52 Rev.A 188,0 MB 17 July 2015

  You must use Win 8.1 driver as driver Win 10 is not available for the touchpad.

• How to install the Synaptics pointing device driver

  Hello

  I accidentally uninstalled my Synaptics pointing device driver. So now I can't use my touchpad like before. It won't scroll now for example. Could someone help me even download and get my touch pad will work as before.

  I have a hp laptop Pavilion that is running a 64-bit windows 8.1and operating system.

  Thanks in advance!

  Kind regards

  Sandrine

  Go here: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=3995705&h_page=hpcom&h_client=S-A-R163-1&cc=us&lang=en

  Select your product > select your model > Option 2: go directly to the result software and driver > driver-keyboard, mouse and input devices > Synaptics TouchPad Driver

  You should be able to download and reinstall the driver.

• When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler.

  When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler. And the only way to resolve the pbobleme temporarily to stop temporarily the computer weighing on the button of the tower.

  Hi Louis,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Missing notification icon for wireless keyboard and mouse in the systray area.

  Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

  Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

  I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Arc Keyboard not recognized by the keyboard software

  Hello

  I recently bought an arc keyboard. Although the keyboard works fine, it is not recognized by the software intelitype.

  When I run the software (downloaded from the support section of the arc keyboard), the key settings tab says "no keyboard microsoft usb not detected"

  The Hardware tab says:

  "HID keyboard device.

  Manufacturer: (Standard Keyboard)

  Location: On the Microsoft Hardware USB keyboard

  Device: This device works correctly

  ***

  This is a wireless keyboard, it works, but I can not find a bluetooth device that is associated with the wireless.

  Reinstall the hard and software do not solve everything and I could not find a solution on the web.

  I am running Windows 7, 64-bit.

  I could use some help here!

  Thank you

  Hans

  Hello Hans,.

  Thanks for posting your query in Microsoft Community.

  I understand that the IntelliType software is not able to detect the keyboard of the CRA. The question could arise for various reasons, including a faulty hardware, damaged driver etc. I would suggest trying the following methods and check if they help to solve the problem.

  Method 1:

  Run the hardware and devices troubleshooter. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  Open the hardware and devices Troubleshooter

  If the issue still not detected or resolved, proceed to the next method.

  Method 2:

  I suggest you try to install TWO software provided for Windows 7 in the following link of support for Microsoft Arc Keyboard. Check if the keyboard is detected.

  Microsoft Accessories: keyboard Arc

  If the problem persists, I suggest you refer to the following article which allows troubleshooting of common keyboard problems.

  Troubleshooting: keyboards

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.