LabVIEW stops working overnight

Similar Questions

• LabVIEW stopped working after windows update

  Windows XP 32 bit with Labview 2012 Service Pack 1 - Windows Auto-implementation to date 11 may 2013.  After update, Labview crashes at startup, nothing suits him.  I tried to restart and all the usual nonsense.  You can open the screw, but then the CPU enters a State of usage of 50% or 100% (which seems to be random) and Labview hangs just w / of the hourglass icon and never answers.  I can open NI MAX and querry various instruments, but crashes just Labview itself (start or any what VI).

  I need fix as soon as POSSIBLE, very tight edge scientist, cannot wait TO open their doors Monday morning.

  Help, please!

  
  

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• USB 6008 analog i/o has stopped working

  Hello

  I have been using a USB-6008 for a few weeks now and it has worked well. I've been using the outputs digital, analog inputs and outputs this morning and they worked very well. I worked on something else for an hour or two and then resumed using the 6008, find the analog pins have stopped working. The show output analog on 1mV any value I send to them and the analog inputs always read - 10.3, despite limits MAX being set to 0 and + 5 (and me only using 0 - 5V on them). I tried all the inputs and outputs, in all ways (CSR, diff) with the same results. The digital outputs all work very well. Yes, he is grounded properly. Yes, the wires have continuity. My multimeter don't lie about me, either.

  I took the MAX test panel to solve the problems. The unit passes its tests of self-control, and my Labview program does not return errors by contacting the 6008. I don't connected the 6008 which could exceed the voltage or the current limits of entrances and exits. In fact, all I did was unplug it when I stopped using it as soon as possible and then reconnected it when I went back to work. The material to which it is connected has been turned off during this time.

  Any ideas? Thank you.

  Problem is solved. If anyone finds this is interested, the problem was at the level of the material, that the 6008 has been connected. I'm covering, among other things, to a PIC Microcontroller. I just changed the oscillator on the PEAK, and inadvertently changed parameters parameters of the ADC as well. This caused the pin used as my reference voltage (connected to + 2, 5V output of 6008) to transform itself into a digital camera of output, a value of 0. This short-circuit the + 2, 5V output of the 6008, causing it to close.

  Lesson learned: check your material carefully, even if it does not make the difference in a first time!

• Game pad has stopped working

  I was able to get my joystick readings earlier today, but all of a sudden it stopped working. There is nothing wrong with the joystick (tested from the control panel).

  When I have the joystick of the query and create an indicator, I see that there are two "controllers" on my computer. Looks like labview is grateful for the 'other' the joystick, which isn't actually a game controller. Is there a way to specify what joystick I want to use (Logitech Attack 3)?

  A screenshot of my interface is attached.

  Thank you!

  Difficulty:

  On the joystick initialize block, create a constant for the device index specifying what "joystick" that you want to use.

• IMAQ ImageToArray VI I16 ouput stop working

  Someone has experienced problem with the IMAQ ImageToArray VI as the exit I16 stops working suddenly. The U16 works fine however.

  Hello

  Could you elaborate a bit on your problem? Do you already have the IMAQ ImageToArray VI working with I16 output, but now it no longer works? Is there a wire cut from the output? What changes have been made since he was working? This information should help us to hone in on the issue. In the meantime, I found a forum related to a similar question (http://forums.ni.com/t5/LabVIEW/IMAQ-quot-image-to-array-quot-directly-wired-to-quot-array-to/td-p/2...). Have a great day!

  Karine w.

  Technical sales engineer

  National Instruments

  [email protected]

• SLOW computer: "xoutzoi has stopped working".

  My Dell inspiron 1525 with Windows Vista has started running VERY slowly overnight. The mouse is too nervous. I get the message: "xoutzoi has stopped working". Sought to find xoutzoi & see that it is in the Elf AppData/Roaming in a folder called 'ozzuvao '. I'm NOT a computer expert (as you can probably just of my question). I wonder if I can remove the xoutzoi from the computer or if it's necessary. Advice on how to solve the problem would be much appreciated.

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the button F8 repeatedly until you are presented with the Windows Vista Advanced Boot Options.
  3. Select it Safe Mode with the option of networking using the arrow keys.
  4. Then press on the key on your keyboard to start Vista Safe Mode.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

     Once in Safe Mode with network, download and run RKill.

     RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

     http://www.bleepingcomputer.com/download/rkill/

     Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

     http://www.Malwarebytes.org/products/malwarebytes_free

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     And also scan with the free version of SUPERAntiSpyware

     http://www.SUPERAntiSpyware.com/download.html

     SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

     SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     THS is a very good program to scan your system to remove adware, etc.:

     http://www.bleepingcomputer.com/download/adwcleaner/

     AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

     @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

     And just to be sure, nothing is lurking in the background:

     'TDSSKiller Rootkit Removal Utility download for free'

     http://USA.Kaspersky.com/downloads/TDSSKiller

     ABon the Defender being turned OFF

     With MSE installed Windows Defender is supposed to be disabled.

     MSE has been designed with its own version of Windows Defender under its own program.

     If the two were running, it would cause system conflicts.

     ___________________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
     /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

     If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

     If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

     "How to perform a repair for Vista Installation"

     http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Explorer stops working when I try to access a drive mapped on my FTP server on the internet.

  I just changed web pages (using Crimson editor) and instead to save the files on my hard drive I just left open and "hibernating" my machine overnight.  After 3 days of having an FTP connection (opened by a mapped drive) setting on my computer hibernation, I accidentally hit Shut Down, and I lost all my work, ARGH! (Yes, I know, I should have better). In any case, now when I open my computer and click on the FTP of the mapped drives, I get the message that Windows Explorer has stopped working.  And if I go to Internet explorer (7), enter ' ftp://mysite.com it brings me to a root FTP page where it says: to view this FTP site in Windows Explorer, click Page, and then click Open the FTP Site in Windows Explorer. " I do that and it brings up a window of the Explorer windows momentarily and then I get the message. Explorer Windows has stopped working.  Any ideas? I hope I don't have to reinstall the operating system.  I did a system restore to 4 days ago. It did not work.

  Hi SewNSew,

  To refine the question, I suggest you try the following steps:

  Step 1: Set the clean boot computer and try to access the drive

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  Important: n ' forget not the computer to start normal follow step 7 in the link

  Step 2: The utility of Auditor (SFC) for the file system allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  (a) click Start and in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  (b) at the command prompt type sfc/scannow , and then press ENTER.

  If the problem persists,

  Step 3: Disable control (UAC) user account and make sure to do this, follow these steps:

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on Turn User Account Control on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the use User Account Control (UAC) to help protect your computer, clear the check box to disable UAC, and then click OK.

  Important: It is not recommended to disable UAC; We just try to limit the question. Please, enable UAC after the test is performed. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  See the link below for more information

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Constant error - "Adobe Acrobat Reader DC has stopped working"

  Recently, we purchased a new high-end Dell Precision Workstation from Dell and bought Adobe Acrobat Standard DC with him (Dell).

  At the reception of the computer, whenever we try to open a PDF file, or do anything related to a PDF file, we will randomly get a dialog box of Windows indicating "Adobe Acrobat Reader DC has stopped working".

  I've attached a screenshot of this error.

  

  PLEASE NOTE THAT THE ERROR INDICATES 'ACROBAT READER DC', BUT WE HAVE NOT INSTALLED CD PLAYER - ONLY ACROBAT STANDARD DC

  Specifically, it can be almost ANY Acrobat associated action that triggers this error, including:

  • Opening Acrobat Standard DC
  • In Windows Explorer, when you browse a folder containing PDF files in it, and when clicked (to highlight) a PDF icon on screen
  • Doubleclicking on a PDF from Windows Explorer.
  • Saving as a PDF, or print a document to a PDF file.

  I searched this error online widely and tried all the 'solutions' that I read. This is a COMMON problem, and it shows messages from the forum that Adobe does not have the problem, or is not a way to fix the problem.

  I tried a recommendation - that happened to Adobe's Forum Moderator, to uninstall the program, then run

  AdobeAcroCleaner_DC2015.zip, which apparently removes any vestige of the previous installation.

  After uninstalling, cleaning, then with the software, then reinstalling the original version that we bought (which, according to the configuration of the sysinfo file is Version 15.6.30033.133277) - ORDER of the ERROR, AND IT has WORKED FINE for 3 DAYS. Prior to this relocation, it would crash with this error about 1 times per minute (sometimes more or less frequently), but constantly, so when we arrived 3 days not a mistake, I assumed that this problem has been corrected.

  Then, on 18/08/15, the errors started. I checked the Windows Update since Adobe has updated the entire program and there is no option to "Uninstall" the update (apparently either Adobe which is off, or if they replace the entire program, you cannot uninstall the update). The Version on this 'update' code was 15.006.30060. I confirmed that the program had be reinstalled via Windows Update automatically, and the date of installation of program in Control Panel was in fact 18/08/15.

  So, I repeated this process, uninstall the program, the race of vacuuming, reboot, connecting the Adobe ID account, then by reinstalling the ORIGINAL version, we bought Dell "Dell digital delivery" process - to reinstall our original version - which had already solved the problem for a couple of days.

  THIS TIME, IMMEDIATELY AFTER you HAVE REINSTALLED, I TURN OFF ADOBE UPDATER, thinking that it would disable future updates.

  Overnight, we came into work and saw that the program was no longer updated automatically once himself again, despite the fact that the update from Adobe was extinguished, it again, updated in any case!

  Of course, since it was updated, the constant errors started again, just like before!

  
  

  I could repeat this process continuously, but its a lot of your time for our IT Department to keep mounting, and the error reappears just apparently every time that Adobe did an update. And speaking of which, why can't NOT UNINSTALL a "Adobe Acrobat Standard DC update" when you uninstall other issues updates to Windows for example?
  

  My PC is Windows 7 Service Pack 1. It is 64-bit.

  At this point, our options are either to get the problem fixed, or discontinue use and uninstall the program - we really need because that person publishes our CAD designs out in PDF format for documents control.

  This PC is a new precision workstations Dell - straight out of the box and is running Windows 7 64-bit with Service Pack 1

  PLEASE HELP ME SOLVE THIS PROBLEM! I spent several hours EACH day for a week, try to solve it, but based on the number of complaints about what I found online it seems to be a problem purely of Adobe, and replacing "Refresh" the DIFFICULTY ISN'T THE PROBLEM if it's what it was intended to do.

  Thank you

  Dave

  Hey Joe,

  Thanks for the help. However, we have solved the problem. We have added very early in the directory that you are proposing, but it did not help.

  One of the Tech Support guys Adobe we finally talked to suggested disabling the "Preview Pane" feature in Windows Explorer and it immediately solved the problem. Since then, we have had no problems.

  This is only a workaround, however, as the preview pane was invented for a reason - to visually identify files based on the forecast of nail. We work with many, many files of CAD data, and this preview function allows to visually identify a file based on the image much faster than having to read the file name - which in our case is long and technical, CAD Solidworks file names.

  Thus, we have so much need for Adobe to fix this feature so that Windows Explorer can display a preview of PDF files. Its a shame to have to put out in the world, just because of a problem with a single application (Adobe Acrobat DC!)

  Thanks for your help!

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support