Laptop has completely dead? :-(

Similar Questions

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• Stream laptop HP 11: laptop has completely stopped working

  I've been on gmail, I try to print an e-mail when I got a message saying had stopped the page and I would like to wait or kill him. So I pushed to kill and took me to the desktop. On the desktop, I couldn't do anything to work so I pushed the power button. The power button starts blinking and the screen went black. Then I pushed the button of power again and the screen came blue and it won't do anything.

  My daughter also said, that the left speaker is not working.

  I'm on a tablet now and it does not work well most of the time, so if it takes a few minutes to answer, it's because I have a problem with the tablet.

  Hello

  > as today the issue with the boot

  > so try to do a power drain

  > remove the battery and the power cord and hold the power for 20 seconds

  > then put the battrey and try

  > If still the same issue trying to do a restore

  http://support.HP.com/us-en/document/c03327545

  > once who took supported

  > it could be browser issue try different broweser

  > and IE of rest

  https://support.Microsoft.com/en-us/KB/923737

  * Click on the thumb BRAVO upwards on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• My I Pad has gone completely dead. It is a model and just completely dead tw vertion. Anyone has an explanation please

  My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???

  How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• Satellite Pro A120 is now completely dead

  I have a Pro A120, which has not been used for a few months, but is now completely dead.
  There are no lights on it at all. I bought a new power adapter, but still nothing.
  Can anyone suggest anything to check/replace or did it. It worked fine the last time I used it.

  Hello

  Remove the battery and unplug the AC adapter.
  Wait 1 hour or more and then reconnect the two parts.
  Then try again to power the unit.

  If that does not help, check out the RAM modules.
  Remove a module and test the device with a RAM module.

  If that does not help, then you should get in touch with a local computer technician laptop because he feels as a serious problem of material

• Satellite M70 - LCD display is completely dead

  Hello

  I have SatelLite pro M70 PSM76E and I it has following problem
  When I try to turn on, LCD is completely dead. I have connected the CRT and it seems to start ok but when it goes to windows it freezes and restarts after a few seconds.
  I think this is not problem with OS because when I use the recovery CD and knoppix cd LCD screen is always black. Maybe that's the problem with the graphics card or motherboard.

  I do not have a manual to disassemble to clean my M70 inside.

  I would find myself solution before going to the service.

  All ideas,

  Concerning
  Wuwik

  If you get an image on the external monitor, but not on the internal, it sounds like a failure of inverter FL. It controls the backlight of the screen and must be replaced.

  I recommend you contact an ASP in your country. They can disassemble the laptop and exchange the part. I m sure they will help you.

• HP TouchPad is completely dead

  After using the touch pad a following, the next day it became completely dead.

  I thought that the battery could be drained.

  If connected to the charger.

  But after that nothing has been seen on the screen.

  I tried all five ways to make the HP in operating condition, mentioned on the support of the touch pad.

  It is said in the fifth stage to install WebOS doctor.

  I did it too and when I coonect the camera to the laptop, the device is detected by the laptop, but WebOS doctor do not highlight the next button.

  I kept it for 4-5 hours of charge with USB port.

  But it still does not.

  Well want to, help me as soon as possible.

  Kind regards

  Serin

  Patricia wrote:

  Thank you

  After loading of Ubuntu on PC.

  I need to connect the touchpad on the laptop, and it will give instructions to activate my touchpad.

  Hope I'm right?

  Even if it might be too obvious, but I'm new with it. Please excuse me if I asked too obvious.

  Thank you once again

  Once more, you will need to follow the directions exactly as written in the thread that we have linked to you.  Just plug the touchpad to the pc will not fix anything - you need to download both programs, unzip and extract one of them, change the directory, and then run the program.

  Good luck!

  WyreNut

• What is my iphone 5 completely dead?

  A few days ago, while I was at school, my iphone 5 stops completely. It 'didn' t show it must be loaded, the screen was black just plane. I tried to recharge it for a day, nothing... Tried to hold the buttons home and lock for 10 seconds, 30 seconds, 1 minute - absolutely no response. Does this mean that my iphone 5 is completely dead? The phone is about 2-3 years of age, but the battery has been replaced half a year ago.

  Start here

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

  You say that the battery has been replaced recently. This procedure was performed by a genius bar Apple retail Store or a retailer Apple iPhone service provider or by a repair of alley (note the emphasis placed on the iPhone)

• my laptop has deleted a file in the trash without telling me what he

  my laptop has deleted a file in the trash without telling me it and now I can't get more than 200 documents

  Any ideas on how to get one of my documents back, I tried to search in the finder on the mac, I tried to retrieve it from word and it still does not

  General file recovery

  If you stop using the drive, it is possible to recover files that have not been overwritten by using the recovery software such as MAC Data Recovery, Data Rescue II, recovering files or TechTool Prodeleted.  Each of the previous ones come on a bootable CD for use without risk of writing, more data on the hard drive.  Two free alternatives are disc drill and TestDisk.  Look for them and demos to MacUpdate or CNET downloads. Recovery software generally provide trial versions that allows you to determine if the software would help before actually paying for it. Beyond that, or if the drive has completely failed, you must send the drive to a recovery service which is very expensive.

  The hard drive remains the most widely used and the data are recorded, the greater the chance that your deleted files will be overwritten.

  Also, visit The FAQ XLab and read the FAQ on data recovery.

• Satellite L50 - B - 14 M completely dead - no power not on

  Hi all

  I am now the proud owner of a Toshiba Satellite L50 B 14 M, since a few days it serves not on at all. When it is pressed the button at the top right (even for al longer) nothing happens, not even a little noise or a flash of light. He remains completely dead and will not turn on at all. Haven't tried with adapter connected / not connected / without battery still no change. The laptop was not abandoned or in a hurry or anything strange I just pressed the power button to continue working on it.

  Tips / advice is much appreciated! Best regards, Jan

  Hello

  It's really not easy to say what may be wrong with that. Unplug the AC adapter / CC, remove the battery and press the power button for about 20 seconds. After doing this leave for a while and connect the power supply only.

  DC in / battery indicator lit?
  What happens when you press the button walk / stop? Is there a reaction?

• HP pavilion 15 laptop: update for Windows 10 laptop has removed Bluetooth?

  Product number: F4T58EA #ABU

  After that I updated my windows 8.1 to windows 10 laptop remove bluetooth.

  There is no option in the settings to enable or disable. Nothing to do with bluetooth has completely disapperaed.

  I looked through device controller speaker, but there wasn't anything that had name bluetooths. I also looked through the computer management services and found two bluetooth, Bluetooth Handsfree and service support of Bluetooth services. they were both the value of manual start and weren't running. I started them and implement autostart. It makes no changes to the problem though.

  I think the problem is my bluetooth drivers are outdated and maybe I just need to reinstall drivers. But I don't know what my bluetooth card is. Update of drivers for other hardware has solved one problem with my PC after windows 10 updated.

  It's just the Windows bluetooth service.

  Each PC has this programming if it has bluetooth or not.

  Al, I can tell you, it's that your laptop has never come with BT

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• My Satellite laptop has been freezing randomly

  Hello

  I've seen a lot of posts on the subject, but no solution. So my laptop has been freezing at random the day I bought it. Today it happens much more often, this becomes ridiculously boring.

  Is there a way to fix this?

  > Once again, there was a notification that emerged after one of those who freeze soemthing mean in the sense of "there was a problem with amd (graphics card)?"but it was resovled."" It's all updated however.

  This notification comes from the graphics card driver. It might be possible that there is a problem with the graphics driver or with the graphics chip.
  Try to install the latest driver for Toshiba page. In case this doesn't help, recommend you to contact the service agents to check the hardware parts

  But the previous user's right, its really hard to talk about issues that put t always appear or are difficult to reproduce

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.