laptop to tv connection lcd display

Similar Questions

• Laptop computer 32AV700A REGZA LCD TV using WLan connection

  I would like to connect my laptop to the new LCD TV - REGZA 32AV700A using WIFI rather than via HDMI or PC connector.
  Is it possible on this LCD TV.

  Anyone know what type of dongle, I expect to connect via the USB port on the TV?

  Thank you

  Hello

  According to this technical data Toshiba this TV has not been equipped with a WLan:
  http://www.MyToshiba.com.au/products/LCD-TV/WXGA/av700a/32av700a/specifications

  But you can use a DLNA solution.
  http://en.Wikipedia.org/wiki/Digital_Living_Network_Alliance

  http://www.DLNA.org/

  The Toshiba REGZA series supports the DLNA standard.
  Also any PC with network (WiFi, Lan) interface can become a DLNA device by installing DLNA software. Google a bit there are a lot of different software.
  I found this one:
  http://www.tvmobili.com/

  Windows Media Player 12 also supports DLNA roles.

  I hope that helps a little... I recommend reading on this topic for more information...

  Welcome them

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• When connecting my laptop to a TV LCD TV screen has scattered green lines

  I have Sony Vaio S13118GAB and TV LCD Sony laptop, I have connected my laptop to TV cable HDMI sound is perfect and the image is there, but there are a lot of green lines on my tv screen. How to fix that and make the image more clear and free of these disturbing green lines on-screen?

  have you tried another HDMI port on TV or another HDMI cable?
   
  If you have done the above and tried different screen resolutions and have the
  latest for your video card driver, you should contact Sony support.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Satellite 1800: Fault pin plastic LCD display!

  "Look at the LCD display screen. If you can see a small image on the screen, backlight fluorescent display screen can be disabled. Light of a flashlight directly to the screen will make it much easier to see if or not there is a screen image actually present, but not turned on. On most Toshiba laptops, there is a small plastic or metal pin near one of the LCD cover hinges. When the display lid is closed (closed), this PIN is pressed against an internal switch that turns off the backlight, saving battery power. You can turn on the backlight by pressing repeatedly on this PIN. The normal screen image will be then suddenly appear or reappear. »

  It's a recommendation, I took for my Satellite 1800 Toshiba help suggestiuons... However, when I type the PIN, she don't flick the backlight on and then turns off very quickly. I can't stay!
  It drives me crazy and I can't find anywhere on the net wherer this fault is mentioned.

  The problem has gradually worsened over time. I used to be able to move the angle of the screen and tapping the PIN to operate. But now, I don't have a chance so he could stay forever! I think I have to open the screen and check if the PIN needs to re - solder or perhaps the FL lamp wire is pinching somehow...

  I do not know... I am far from being a geek... also... What does FL stand for?

  PLEASE PLEASE PLEASE HELP.

  Hi Liam,

  The description of your problem suggests that the FL inverter has failed. It is a component that provides the background lighting for your screen.

  Normally when you close the PIN you are talking about depresses a switch that turns off the UPS FL. If you can get a momentary illumination of you LCD when you prod this switch I think the inverter FL itself is defective.

  The bad news is that you will need to take your laptop to a partner of authorized Service for repair. The good nes, it's that the FL inverter is not one of the more expensive items.

  Kind regards

• Laptop to TV connection problems

  Hello!

  Im having problems with my laptop to tv connectivity.

  Now my laptop is connected to my tv with an hdmi cable, it was working perfectly, then, by chance, I unplugged the hdmi cable. When I plugged in again, the screen was all black except for an inch of top of the normal screen. The screen of MY laptop is broken while I was using my TV instead.

  However, when I go into safe mode, the screen is normal, but it is waay Limited (no sound and display is rendered primitive) I would like to know what I'm supposed to do to solve this problem!

  Thank you!

  Accidentally unplugged the cable can cause damage.

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Inspiron 6000 - no LCD display

  I tried to set my daughter-in-laws Inspiron 6000 for these past few weeks.

  Problem: No LCD screen after the blue bar of Windows.

  Actions:

  Last RELOADED, video driver (ATI MobilityRadeon X 300), Bios (A09), adjustment and Support of Dell diagnostics.  .

  An external monitor works fine.

  A ran the last video diagnostics (from CD) and passes LCD display all tests.

  When you display the view tab in the properties of the video, it shows the connected monitor (if you use the external monitor) and shows the LCD screen as 'Not connected', even if the lid is open.

  The system is not in standby mode when the lid is closed, even if the option is enabled.

  Conclusion: The lid switch must be faulty.

   

  Has anyone replaced the cover switch in the Inspiron 6000?   If so, what is the part number and where can buy the switch?

  PS. This forum has been a great help to me this good.
  
  

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• Portege R100 and WUXGA(1920x1200) external LCD display

  I bought Dell 24 inch wide LCD display.

  I thought that my portege R100 can support the resolution 1920 x 1200 because its maximum resolution is 2048 x 1536, but it's not. TT

  Graphics chip is trident cyber xp4.

  I already tried to use software PowerStrip, but it did not work for the chipset graphic trident.

  Is it possible that I can use the resolution of WUXGA(1920x1200) using my portege R100 as regestry change or what ever?

  Hello

  I found the info that 1600 x 1200 is a resolution supported max for Portege R100. As much as I know there no way to change this through any changes to the registry. As you know the performance of the graphics card can not be changed.

  Good bye

• I see Camileo P30 photo on laptop as if connect the camera to the TV?

  Hello!

  I have laptop with HDMI and Toshiba Camileo P30.
  I see the image of the camera on my laptop as if connect the camera to the TV?

  Should what software I use (cause that nothing happens, when I connect my camera)?

  Hello

  Is your laptop supports HDMI IN port?
  If this isn't the case, then you can not do this.
  You need an HDMI port which received signals as a TV or external monitor

• Is it possible to connect Thunderbolt display MacBook?

  Is it possible to connect Thunderbolt display MacBook?

  N °

  A Thunderbolt screen can only be used with a Mac equipped with a Thunderbolt port.

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Why I can't find my network wireless on my XP laptop but can connect to my Vista laptop?

  So here's my situation.

  I have a small laptop with Windows Vista Home Premium 64-bit
  I also have a laptop with Windows XP Service Pack 3 on it
  We just moved into a new House.  In our old House we had DSL with wireless router and two laptops where able to see and connect to the network.
  In our new home even company and probably even router if I'm not mistaken my computer Windows Vista laptop sees and connects to the wireless network.
  However, the XP laptop sees about 10 networks wirelss in screen 2 wireless network connection, but not ours.
  Here's what I've tried so far:
  -Tried to restart the router
  -Tried to restart the laptop
  -Tried to update the drivers for the wifi
  -Tried manually to create a wifi network of same name and enter the key
  I'm really ideas, especially since he could see and connect the network in the old House 2 days ago.   So it comes even to see my wifi network listed may not even try to move on the part of tent to connect and enter the key.
  Any help would be much appreciated and if someone needs more information let me know.
  JF

  Hello

  I suggest you to follow the steps below and check if it helps.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 2: How to troubleshoot wireless network connections in Windows XP: http://support.microsoft.com/kb/870702

  (Valid for Windows XP service pack 3)

  Hope this information is useful.