LaserJet 1012 - Duplex/duplex printing is no longer

Similar Questions

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• LaserJet P1006 duplex printing manual

  I have a problem with manual duplex printing on the Laserjet P1006 running Windows Vista. I have multiple accounts configured in Windows. When I print using the account that installed the printer, everything works fine. When I try to print to another account, the prompt that asks you to click continue to print the 2nd side of the paper just has a button closure instead of a button to continue on the bottom. To confirm the problem, I uninstalled the printer and then reinstalled on another user account. Now, my account not manual duplex, but the other cannot. Does anyone have a solution to this problem?

  Ah ha! I have a better workaround (at least for my situation; if all goes well it will help others too)

  At first, after reviewing the issue of original posters it dawned on me that if I could just install the driver as a normal user (not Admin) then it should work as long as I'm logged in as a normal user (I'm the only user on this computer). But unfortunately I don't have the ability to install unless I run as administrator, so no hope there.

  So here's the real solution (for XP users, at least): after installing the driver as an administrator, you must open the "Printers and faxes" window as an administrator. (There are a number of ways to do this. One way is to run Windows Explorer as administrator and then go to the desktop and on the side panel, there should be a link to the control panel. Open and then click on printers and faxes.)

  Now select the printer, right click and choose Properties, then select the Security tab. Under "group or user names", select everyone. In the permissions window, check all the buttons 'Allow', then press on apply. (While you're here, you might also click the "Device settings" tab and confirm that the checkbox "allow manual Duplexing" is checked.)

  For me, which did the trick.

  The advantage is that, before I was also not able to save any 'Print task Quick Sets' in printing preferences of dialogue (unless I was running as an administrator), but now I'm able to do the same.

  Message edited by kmote 03/11/2009 10:09

• HP LaserJet p2035n: LaserJet p2035n Duplex printing in Windows 7 x 64 error

  I added a Windows 7 x 64 computer to the home network. Duplex printing works, but the second manual side does not invert the order of the pages, resulting in a controlled print job. In XP, of course, there was an option to reverse the order of pages when you print the even pages. Any ideas how to make it works with the Windows 7 printer driver?

  Well, I finally thought to it after trying various options. The solution is completely counterintuitive, is not yet documented anywhere on Earth, but it works. Here's how:

  Select "Print on both sides, flip on short edge pages."

  Press 'print '.

  Once the print job is done on the first side, the troubled yellow icon at the top of the printer starts flashing.

  Remove the printed pages of the delivery tray and place head downstairs, side white upward, in the manual feeder.

  Press the button on top of the printer paper.

  Second side will now display in the correct order.

  Thank you, HP, whereby we understand such things on our own.

• LaserJet P2055dn: HP LaserJet P2055dn - duplex printing problem

  Hello

  Predict two weeks ago about problems with on our printer HP LJ P2055dn duplex printing began. We are sure that we have checked the duplex printing option but the printer does not not in this field and just print document normally, without print front and back to 100%. This is the case for about 50% of the printed documents.

  Printer is connected via a LAN cable.

  The drivers used: universal printing HP PCL 6 (v5.9.0 :)

  Y at - it all isue similar known with this model? Could you please help me? :-)

  Best try is reinstalling drivers, right?

  THX

  Ladis

  I do only material, so I have no answer if the word has a problem.  Another option is to load another copy of the pilot, but call it a 2055duplex and set the properties of the default duplex.  This way when one of your users want duplex just what they need to do is change the printer to the 2055duplex and it should work.  Leave the default value as the simplex driver.

• Duplex printing is no longer

  I have a printer MFP M1217 nfw used to be connected to an iMac with a USB cable. I reinstalled as a WiFi printer and the print dialog box no longer shows the box to have chosen double-sided printing. Any help?

  Hi JVCosta,

  Thank you for the additional information. First go to print/scanners Apple System Preferences, delete the printer MFP of M1217 nfw. You can run the HP installation wizard. This will be implemented for the wireless drivers. Thank you.

  Hope it will be useful.

  Thank you.

• HP LaserJet 1320 will not print duplex on Win7 64 bit

  HP LaserJet 1320 is duplex printing is no longer. using Win7 64 bit system. I have used this printer for several years and it has worked flawlessly. Just installed Win 7 64 bit machine, has made the windows update in the choice to install printer, selected the "print on both sides" in the printer preferences. The book is re - feeds like it going to print on the other side, but a new sheet out and 2nd page prints on the 2nd feed and he re - feeds also as if printing on both sides. This used to work fine under Win XP

  Hello

  Please try to install a replacement driver to work around the problem and inform me of any changes:

  1. Run the installation of the following universal print driver:
     http://ftp.HP.com/pub/softlib/software12/COL40842/DS-99374-2/UPD-PCL6-x64-5.4.0.11744.exe
  2. Select the traditional installation mode.
  3. Set the port as LPT1 and follow the steps to complete the install wizard.
  4. Once the compelting the installation, you will notice a new icon of the listed all-in asHP Universal Print driver.
  5. Right click over the icon of LJ 1320 existing, click printer properties, enter in the Ports tab, note the port and close the window.
  6. Right-click on the universal print driver, click printer properties. Enter in the Ports tab and check the same port that you used in the original pilot.
  7. Enter in the device settings tab and verify that the unit of the duplex unit is installed.

  Now try pritner duplex using the universal print driver work.

  Please let me know if this is useful,

  Shlomi

• Help! HP Deskjet 6980 print is no longer in duplex

  I recently upgraded from Windows XP to Windows Vista and reinstalled the software / drivers for my Deskjet 6980.  Everything went well spent - it is printing without wire - but for some reason the automatic duplex printing function no longer works.  Even when I select the automatic duplex printing option in the printer preferences, it does not print duplex.  Is there a way to fix this?

  Thanks in advance!

  Vista can default the duplexer "not installed".  Go to the Printers folder, right-click on the Deskjet 6980, run as administrator, properties, parameters of the device and the unit installed duplex and duplex manual to disabled, apply, OK.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• HP laserjet 1020 how disable duplex printing

  I've updated mny Laserjet 1020 driver on Windows 7 and now the printer default to double-sided printing, but I don't want this option turned on. I can't find any property where I can disable this default value.

  Glad to see that you have solved the problem. Just to make this clear solution for everyone... I have attached a screenshot and the directions below on how to cut manual duplex printing...

  Go to your printer icon. Click Printing Preferences. Click on the finish tab and make sure that:

  1. to print on both sides (manually) = checked. You can get a pop up with each print job after that, so beware

  2. NOT to print on both sides (manually) = unchecked.

  Additionally, make sure that when you print a document that your game your appropriate printing preferences by clicking on Print Properties (from the application you are printing from) and then making sure the impression on both sides is clicked or says no

  

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• LaserJet CP2025: My computer did an update of Windows 10 and now I can't do duplex printing CP2025

  Microsoft today pushed through an update Windows 10. Now I can't do a duplexing printer laserjet CP2025. Any ideas? The drivers that I download do not seem to help.

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Now try printing again.

  Kind regards
  Shlomi

• HP Laserjet P2015d: HP P2015d duplex printing blank first page

  Hello everyone

  I have in my office, among other things, the printers two HP Laserjet 2015b. We use it on Windows XP, 7 and 10. Whenever I put them for the first time, I have the same problem with the drivers.

  From XP and ending with 10, there are 3 packs of drivers, PCL5, PCL6 and Psalm none of them installs ok, printers work, but there is a problem in duplex printing, gives me a headache. I try to only print only one page (for example: 1 page, current page, etc.), printers print on both sides of the paper, first white and the text on the second.

  In XP and 7 that I managed to solve the problem in a very strange way, install a software package and manually change the driver with that of another pack! For example, I installed PCL 6 and I changed in the printer properties Advanced pilot, the PCL 5 driver. And that after many attempts to find the best combination!

  Now, I have improved my work to 10 Windows 32 bit laptop and I can not solve the problem either. Any driver, I choose the 3 special indeed for Windows 10 or fom those made for 7 or XP, try to only print that one page in duplex, the printer prints on both sides of the sheet of paper, white on the first and on the second text! And I find no option in the settings of the printer to solve this problem.

  Can someone help me with this problem?

  Thank you

  Thank you all for the advice and opinions. I did it!

  After many, many attempts, I noticed a small option "allow manual duplex", which was enabled by default, and which appeared in print (MS Word and other programms) main window only when selected duplex! Strange! I disabled it in the Advanced tab of the printer properties and everything is normal now!

  Now I can use the printer again only in "duplex" mode, and it prints a page "simplex" and the two following pages "duplex", because it suppose to do!

• HP laserjet pro M125: hp laserjet m125 does support automatic duplex printing?

  The hp laserjet m125 does support automatic duplex printing? I can only understand how manually to do duplexing so far.

  I don't see anything in the manual mentions automatic duplex. So I think not, manual only.

• duplex unit is no longer an option in the print screen - hp officejet pro 8100

  I have a HP Officejet Pro 8100 that came with a duplexer. Until today, the duplexer has worked. Technically, I don't know that it does not work. But when I open the print screen in open office, adobe or any other program, it is no longer gives me the option to print double-sided. I have no idea what to do and there are no tutorials that explain how to fix this. Any help is appreciated.

  Discovered after trying to reinstall the printer software that because my updated OS updated to 8.1 of Windows 7, my printer is no longer compatible with my computer. Is - this ridiculous or what? I have messaged HP, so I have no guarantee so I don't know that they will refuse any product support. It's okay, if need be I will take my business elsewhere. I would not have to pay for support on a product that they have outdated on purpose. Companies used to be a quality product. Oh how times have changed. It is an expensive paper weight.

  @KKissmann, welcome to the community of HP

  I read your post and I would try to help. Your Officejet Pro 8100 is compatible with Windows 8.1, so we should be able to get through this problem. Maybe you've tried running the installation from the CD, which is perhaps not a Windows 8.1 driver loaded, what can happen and you need to download the driver online instead. We will eventually get there

  Please click here to access the full functionality of driver and software for Windows 8.1:

  Driver and complete software of HP Officejet Pro features

  Once the download is complete, run through the installation until it is completely finished. Subsequently, test print and check if you have the option to print double-sided.

  Let me know if you encounter any problems!

  Happy Monday

• LaserJet Pro M426fdw MFP: Automatic duplex printing works in 2016 in Word but not in 1 c Enterprise 8

  Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?

  The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.