LaserJet 3050: cannot scan

Similar Questions

• LaserJet M277n: Cannot scan from Mac

  I just bought a LaserJet M277n and connected to my home network.

  I can print from my MacBook. I can copy the printer.

  I can't scan.

  I downloaded the HP EasyScan software, but that does not work either.

  For the Capture of Image Mac software and the EasyScan HP open programs and they will see

  the scanner but nothing else.

  If I select 'Preview' Capture of image scanner makes a noise and the light goes from one end to

  the other, but no preview is displayed. There is a dark gray area where the usuall overview showing.

  If I select "analyze" the little wheel goes round next to the name of the printer on the left, but nothing happens.

  Any help would be greatly appreciated.

  Thank you.

  Skoot

  Hi Skoot,

  The link above refers to the firmware, not for the software, these aren't the same things...

  In the configuration Menu, select reports, then the Config report.

  In the product information section, which is the listed firmware datecode?

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• Cannot scan to PDF with HP Laserjet 3015

  I am so frustrated with this new computer and Windows 7.  I can't understand how to use my Laserjet 3015 of scan-to-one. PDF.  Any suggestions?

  Hello, Sara C.

  You can download the manual for the HP Laserjet 3015 and then visit the pages on digitization.
  You would need to scan to a section of the file.

  Click here to download the manual. If you're still having problems, then I suggest you contact HP or check the HP forums, as they would
  be better informed on how to use their printer/scanner.

  I hope this helps. Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP laserjet 3050 problem. After installing windows 7, is it became unable to use the fax machine.

  Standart windows 7 fax-program can not find the driver for my HP Laserjet 3050 all-in-One printer fax-modem. How can I solve this problem?

  Hello

  What type of operating system are you using?

  For Windows 7 32-bit, it is possible to install the full feature software Vista using compatibility mode:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02096212

  For Windows 7 64-bit however there no all the features available.

  You can use the In-OS driver that will provide your printing and basic scan feature via USB connection only, since the PC faxing is not supported for the specific version of the OS:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536257

  If you are not sure of your operating system type, you can follow the steps below to identify it easily:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02002390

  Kind regards

  Shlomi

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• cannot scan

  cannot scan.  error message reads OCR application is not installed on the computer. AIO officejet 8600 windows xp

  To resolve this error message, put the installation CD and run the installation of the software.

  In the first screens of the installation, there is one that says "Install software", then check to see if theres a checkmark on I.R.I.S. OCR software

  Then continue with the installation until the end.

  Now, the analysis should work OK.

  Kind regards

  * Click the stars KUDOS to say thanks

  * also click on the Solution button if your question is answered.

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• Driver for HP LaserJet 3050 with Windows XP Professional 64-bit

  Does anyone know what driver I can use to install the HP Laserjet 3050 which is located on a network? I have Windows 64 HP.

  It is a known and very easy problem for you to solve.  On the computer to which the printer is connected, go to the properties of the computer and note the name of the computer.  Now, go to the printer properties and note the name of the shared printer sharing.  Now on the xp machine go to printers and faxes and click on add printer, then local printer, next and click on create a new port and in the dropdown choose the port and in the box that appears, type the name of the local computer and share the name of the computer to which the printer is connected using the following syntax : \\computername\sharename where you replace your real names.  Click ok and then next and when you get to the page of decision-makers choose hp on the left, then choose any listed laserjet pcl5 driver (Laserjet 2200 works fine) and then following and you can rename it to LJ3050 and end up and you should be able to print now from the xp computer.  To get the computer name of the machine windows 7, right click on computer and scroll down to properties and left-click.  As for the share name go to devices and printers and right click on the icon of 3050 and scroll the properties first and left click and then click on share and the share name will be there.

• HP Deskjet 3050: Hp Deskjet 3050 how scan from computer to the printer?

  Since I can't print

  I was wondering how I could scan as to place the paper and scan from the computer?

  Isn't this possible?

  Thanks for the reply

  Sabrina33 wrote:
  ... I was wondering how I could scan as to place the paper and scan from the computer? ...

  Hello

  No, you cannot scan from computer to the printer. You have to put original on the glass and you can use the HP scanner on computer software to scan and save a document/photo scanned on computer.

  My question: do you have installed the software and driver on your computer yet? You should do this first.

  Kind regards.

• Book of Mac: cannot scan more.

  I have a C4680. Cannot scan more. What could be the problem? Then I tried to download a HP drive, thinking that he could solve the problem. The display shows: click on 'Download' to start the download. But where is the button "Download"?

  Thank you.

  Hi @Sky1 ,

  Welcome to the HP Forums!

  I see that you can not scan with your HP Photosmart c4680, on Mac OS X 10.10. I'm happy to help you!

  For this printer on Mac OS X 10.10 it there's no full feature software and drivers from HP. Only a generic driver that is built into the operating system, as described in this guide, HP printers - install Mac printer driver using Apple Software Update.

  To scan, you will want to go through this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. Even if this post is for a different printer and operating system, it will always apply to your situation.

  I hope this helps!

• everything about will print but gives the warning message that it cannot scan, copies or faxes

  The all-in-one printer is only a month after the warranty and has suddenly stopped working. It can print but when trying to now the scanner displays a message warning saying that it cannot scan copies or faxes. Can anyone help? I don't want to pay the amount of $25 per phone call to hp asking them to help in case they cannot correct by phone.

  Thank you

  Hey carlya,

  Wanted to check on how was the question. I also recommend a tool of diagnosis provided by HP, called HP print and Scan doctor. If you have not done so, then I suggest you download and run this tool.

  This tool can be found by clicking here.

  I would like to know how this happens.

• HP Photosmart D110 - cannot scan

  Just bought the HP Photosmart D110 yesterday and cannot scan.  I'm on a Mac (OS 10.6.4) and whenever I try to scan something, I get the following message:

  Hi all

  Looks like you have either a conflict between the old and the new HP software, or a corrupted installation of the Hp software.

  We can remedy easily enough.

  First, go here and download the latest version of the HP software on your desktop.

  Then we'll run the cleaning brush to remove all software that has been installed HP.

  To run the scrubber,

  Go to Applications/library/Hewlett Packard / click Uninstall HP

  Click on continue

  Highlight your device in the left pane

  Hold down the Ctrl and Opt, as well as Apple and click on uninstall

  There will be a pop up that asks if you are sure you want to uninstall all hp software.  (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)

  Click on continue

  Let the full scrubber .

  Then start the HP software, you just download and follow throughout the installation procedure

  the operating system can find updates and others. If it asks you if you want to download them, accept you.

  Who should take care of it.

• HP Photosmart all-in-One D110a: Solution Center says disconnected printer, can still print documents, but cannot scan

  No problems before the upgrade windows 10. Solution Center says offline wireless printer but I can still print it. Works on windows 7 without any problem for years, has been working for 9/2015 when I upgraded to W10 and the uninstall update KB3132372. Stopped working today. Cannot scan, but the network is in place. Rebooted everything several times. No recent upgrades or software changes.

  Hi @mikealpha,

  Because there was a registry error in your installation, you will need to uninstall and reinstall the printer software. Below, I've posted some links to documents that offer instructions on how to uninstall, and then reinstall the HP software. Please try all the steps in order and get back to me with the results.

  HP printers - uninstalling the software of the printer (Windows)

  HP printers - Download and install the printer driver and software Via USB

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.