LaserJet 3600n: lines Laserjet 3600n Black & Blue Horizontal

Similar Questions

• Designjet 130nr: lines blue horizontal 130nr

  When I try to print a detailed plan of a PDF file, I get the blue horizontal lines or Cyan.

  Changed the magenta cyan and lite lite. Everything seems fine now.
  Thank you

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• Horizontal lines white L7680 black only

  HP OfficeJet Pro L7680, Windows 7
  White horizontal lines alert the graphics and text black or gray.
  The print quality Diagnostics Page results:
  Target 1 seems
  Focus 2 has white horizontal lines on the black and gray blocks. Blocks of color look good.
  The test pattern 3 has white horizontal lines spaced of 0.87 inches apart. They do not align with the arrows.
  I ran the printer align, head of own impression (three times) and functions to calibrate the line break and the problem remains the same.
  This particular case does not appear in the page of 'Problems of print quality of fixation for the HP Officejet Pro L7500 and L7600 L7700 all-in - One Printer Series' to
  http://support.HP.com/us-en/document/c01957673

  Cleaning the contacts has not solved the problem. The links provided by Gemini02 did not have instructions to manually clean the print head. Found cleaning tips at http://www.fixyourownprinter.com/forums/inkjet/66927. Removed print head and whistled down head in a shallow bowl of nearly boiling water for 20 seconds. Ink out of head when you do. Buvardages print head dry lint (if the ink drops on electrical contacts, clean it with damp cloth before you put the head in printer). Replaced the head on the print page print quality and printer. Problem solved!

• little blue horizontal lines on the doc, I've done the nozzel check and head cleaning.

  All of a sudden one day when I print there are some blue horizontal lines on the doc, I've done the nozzel check and head cleaning. I have a 810

  Hello

  ·          What version of the operating system is running on your computer?

  Step 1: Check if the problem occurs on a test print.

  http://Windows.Microsoft.com/en-us/Windows7/print-a-test-page

• text and line color print black

  We use CS3 on PC. When I put a line of color on my text and print Docucolour text and contour on my HP Laserjet or 260 color printer prints black. Obviously the Laserjet prints black only, but we should see the shades of gray and on the printer of color as well the type of red and blue print in black. Before I reinstalled Indesign or any other patellar reflex reaction, someone has any ideas? I can open the suspicious document on another machine and the type still print black. A note: if I make a pdf of the document and send it to the printer color, it prints correctly.

  There is a text printed as black setting in the print dialog box. Perhaps this is true.

  Bob

• Smartphones blackBerry black & blue rectangle icon with a white slash through the middle on a blackberry 8330

  I have a blackberry curve 8330 and recently noticed that when I make a call I have a black & blue rectangle with a white slash goes from the upper left to the lower right.  It is located next to the volume icon.

  Can someone tell me what is this icon and what it meant or how get rid of?

  My husband also has the same phone and it doesn't have this icon on its screen when an outgoing or calls received is connected.

  Help, please.

  Thank you

  His Audio Boost called, or Enhanced Audio.

  If you press the Green dial button > Menu > Options and let scroll down, you will see the option to turn it on or turn it off.

• Multifunction Color LaserJet Pro 200: blue line when scanning from feeder not dish

  When I scan from the charger, I get a blue line that spans the length of the document. It does not happen when I scan from the tray. any suggestions on how to fix?

  Thank you

  Hi @Pichopop,

  Welcome to the Forums of HP Support! I read your post and see that you have found a blue line, during the analysis from the ADF. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are several models of Laserjet 200 series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. Poor power connections can cause problems of copy and scanning and rejection of the toner.

  Here is a document for the cleaning of the glass and Platinum. You will notice that there are two areas for the glass, one for the dish and the other is for the ADF.

  • Copies, faxes, or Scans have Vertical black and white lines to the exit.

  Do not take into account the model and the title. Proceed to step three: clean the glass and Platinum sweeping.

  Please let me know the results and if there is anything else I can help you. Thank you.

• LaserJet M451dw: black line to the bottom of the page

  When I print a document, a continuous black line appears in the middle of the pages. The first 2 pages are normally well, but the rest of the pages have the black line.  I cleaned the printheads etc.  I hesitate to change the ink because there is more than half a cartridge left in all colors.

  It sounds like a faulty black toner cartridge.

  After printing open access toner and remove the cartridge and look at the drum and if there is a black line on the drum, then it would prove.

  If you have half left toner cartridge is still in warranty and you may be able to get it replaced.

• LaserJet Pro black spots 200 printing line

  Hello

  I just unpacked it my new printer, and each print has a row of points on one side. I have run a few cleaning cycles and does everything else in the document:

  http://support.HP.com/us-en/document/c03416215

  Looks like that the toner cartridge has a spot on cant I sort the roller manually so I can see the place? Where can I get a new HP cartridge?

  Thank you!

  Andy

  Hi Vidtender,

  I just sent you a private message. If you are unsure how to check your messages from the forum, this Post instructions of a..

  Thank you.

• HP laserJet 1020 black paper

  I am using the HP printer, but I cannot print in a clear manner, all the papers as an example image.

  I need help to fix it.

  

  Hi FawzyZayed,

  Thanks for providing the screen shot. I see that the printer prints black all over the page. I want to help you.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner on the drum or any other damage to the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  I have provided a document for cleaning inside the printer and running a cleaning page, reset the printer and check the settings of the driver. Solving print quality problems.

  Try to print a document again.

  Let me know the results.

  What kind of paper do you use?

  Try a different type of paper to see if you have the same results.

  You use Genuine HP Toner?

  What is the level of toner?

  Good day!
  Thank you.

• Pages / Question: printing black fine lines table in black instead of halftones

  Hello community,

  someone know how to print tables with fine black (i.e. below 1 point) lines without halftoning of pages?

  I tried on several printers (laser and ink-jet, color as well as PC, usb and network connections).
  No matter what line table below 1pt is pure black halftone instead.

  It affects only the rows in the table. Forms with fine lines, small texts, etc. are okay.

  Any ideas? Help, please.

  Hi fraha,

  Try this. First turn off the grid.

  

  Now apply cell borders

  

  Print Preview

  

  Please answer if that is not what you want.

  Kind regards

  Ian.

• HP envy m6 enterainment pc: black blue screen box asking aidmister password or power on the code

  I don't know what my sister did for my lap top but now when I turn on my lap top it goes straight to the black screen with a blue box saying enter password code or the power of Directors... ??
  
  She is 12 and says she doesn't know what she did and my college stuff is here please help me!

  Hello

  You are welcome

  If you normally sign - on with an email and password, see if you can reset the password via another PC from the Microsoft page on the following link.

  https://account.live.com/password/reset

  Otherwise, there is a general policy on the Forum do not provide methods to bypass the Windows log-on passwords, but a local computer store would be able to do it for you.

  Another option, if all your personal data, etc. is saved, would be to reset the laptop to his "factory Condition" and then set it upwards from the beginning - if you do not have your recovery media, your laptop are shipped with a recovery Partition which is accessible at the start - that is to say stop the laptop, then start typing away at f11 as soon as you turn on.

  A comprehensive guide on this can be found on the following link.

  http://support.HP.com/us-en/document/c00006110#! & AbT1% 3Fjumpid = hpr_r1002_usen_link1

  Kind regards

  DP - K

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Satellite M70-337: random black/blue screen out of nowhere

  Hello

  I have random problems with a black or blue screen appearing suddenly with way now out of it, but to restart. I have no idea why, and that's a problem because I use a dj program and cannot be crashing on me during a concert...

  Any ideas why this might be happening?

  I hope a quick response because I have a concert Saturday and is not what is happening!

  Thanks in advance!

  Here in the forum is not easy to understand what you mean with a black or blue screen. Unfortunately, nobody has posted before and it will be interesting to know what you have done to solve this problem.