HP Laserjet 1022N continues to printing problem

Similar Questions

• "Laserjet 1022n Windows Update", causing problems printing: print jobs do not print

  Hello

  A few days ago I installed upgrading Windows Laserjet 1022n on my Windows 7 64 bit and since then I can not print a page normally: the page does not print. I use a TCP/IP network port.

  I made several attempts to resolve this problem:

  -uninstall the printer driver and install it again (I tried the latest version on the HP site and an older one that worked perfectly before)

  -update the firmware of the printer to the latest version on the HP site.

  When I put the printer in pause and start the print job, you can see in the list. Resumption of the printer, printing starts on the printer but you see that the job remains in the list, flashes again and again. The printer keeps printing the same page.

  I don't know what I can do to solve this problem. There is no way to uninstall the update of the HP Laserjet 1022n software because it does not appear in the list of installed programs (course list is also op updates from windows updates).

  I have same problem printing to the same printer from another PC Windows 7 (with the same windows update done)

  But I have no problem printing with my laptop on an other network printers.

  Is there someone who has the same problem and how to solve?

  Thank you for answer

  I found the solution on this site: http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing

  Just uncheck the chekbox "enable two-way communication" on the "Ports" tab of the properties of the printer and it works normally again!

• LaserJet 400 M401n local printer problem

  I work for a company with remote office environment.

  We have just recently swtched to a new model of small laser printer for the use of the local printer, and I have problems with the first we set up. The LaserJet M401n first was the installation of one of our field technicians program. They connected the device via USB for users HP Elitebook 2540p on docking station and installed the printer using the software from the cd provided and it worked fine.

  End user required to move the printer away from the office, so the USB and power supply were disconnected from the printer and it has been moved and reconnected. After that, the computer showed that the printer is offline. Option of printing of the disabled user, but every time jobs have been sent to the queue, offline they errored quickly.

  I worked with the user remotely and deleted the printer in printers and faxes and print driver from the options in the server properties in this window. I had the user re - connect the printer, but it was not to recognize that something has been connected.

  I went into Device Manager, but I don't see any options to print USB media or DOT4 print media (which is usually the virtual USB port.) There were several devices named "USB Composite Device" and a device called a "USB Mass Storage Device". There are no data storage devices or memory cards connected to the laptop. After removing everyone from the Device Manager, I had the user he disconnect/reconnect the USB from the printer. At this point, the printer has been recognized as connected and adding hardware wizad came. At the same time, a HP Installer utility began. I checked in my computer and there is a removable storage device that provided this installer. It seems that this printer can be a memory chip that contains the software and drivers required.

  I used the HP Installer and installed all the software and drivers, and the printer started working again.

  A week or two later, the user has contacted me and the Office has had some changes made, then the printer must have been dissconnected and resumed contact with a long USB cable. The same problem resurfaced. The printer is connected and even shows like ready. Jobs fail when submitted, and reconnect the cables or rebooting doesn't fix it.

  At this point, I wiped out all the HP report printer software and drivers, removed something that looke HP printer partner since the Device Manager, unplugged the printer and restarted the computer. I connected the printer after the restart and inserted the CD that came with the printer. I used Device Manager to install the printer driver and the print media files on the CD USB (I had to close the HP Installation Wizard about 10 times more it kept popping up). At this stage that the printer has been installed and operational, but when logged in with admin account, the printer should always be prompted for the HP installation software that seems to be running from a USB device stored inside the printer. Which is not "very important, but when I looked at the same way of dissconnected and reconnect the USB cable from the docking station, the printer has stopped printing again.

  The laptop is a HP 2540p with a docking station. He seems to have the same problems when we use one of the USB ports on the docking station or the laptop itself.

  In our company, we run a range of McAfee as VSE, MEE, MEE/PBA, DLP products.

  I will try to upgrade the firmware of the printer and the laptop BIOS. I also asked for one of this model of printers be ordered for our test lab see if we can reproduce the problem on other machines

  Ideas or recommendations would be appreciated.

  bigbankitguy,

  You mentioned that the printer is connected via USB, is that still OK? I want to try the following:

  1. disable Smart Install via the control panel. (Small icon tool and equipment) Configuration menu > Services > scroll Smart Install > DESACT

  Restart your computer and see if that solves your problem. If you continue to have problems, try the following:

  2. go into your task manager > Services tab > click on the button in the lower right of Services > locate HP DS Service > set to automatic; If stopped and then start the service.

  Restart the computer.

• HP Laserjet 1022N: unable to print from IE11 to, HP laserjet1022n HP Windows 10 machine

  I am able to print without any problem at all on my new HP computer applications, but with the exception of Internet Explorer 11.

  When I try to print my internet Laserjet1022n explore closes and we must open.

  Event ID 1000 and source of Application error.

  I uninstalled and reinstalled the printer (connected with a usb cable)

  I would be grateful all the other tips!

  Again, all applications other than IE11 print very well!

  The details are below:

  Log name: Application
  Source: Application error
  Date: 12/07/2015-21:02:03
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer DESK-8U0DERA
  Description:
  The failing application name: iexplore.exe, version: 11.0.10240.16412, time stamp: 0x55b99d3f
  The failed module name: ntdll.dll, version: 10.0.10240.16430, time stamp: 0x55c59f92
  Exception code: 0xc0000374
  Offset: 0x00000000000ea28c
  Process ID vulnerabilities: 0xaa0
  Start time of application vulnerabilities: 0x01d13131da821932
  The failing application path: C:\Program may Explorer\iexplore.exe
  The failed module path: C:\windows\SYSTEM32\ntdll.dll
  Report ID: b43ec6b3-585c-4e70-96e3-721a4de98d63
  Faulting full name of the package:
  ID of the failed package-parent application:
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      1961
      Application
      COMPUTER DESK-8U0DERA
     
   
   
      Iexplore.exe
      11.0.10240.16412
      55b99d3f
      ntdll.dll
      10.0.10240.16430
      55c59f92
      C0000374
      00000000000ea28c
      AA0
      01d13131da821932
      C:\Program may Explorer\iexplore.exe
      C:\windows\SYSTEM32\ntdll.dll
      b43ec6b3-585c-4e70-96e3-721a4de98d63
     
     
     
     
   
  

  Hi @phlump,

  Welcome to the Forums of HP Support!

  I see that you are unable to print from Internet Explorer 11 to your HP LaserJet 1022n printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you are able to print from other applications. While this question would be better suited for Microsoft, I can make some suggestions. If these solutions do not help, please contact Microsoft.

  Reset Internet Explorer settings (backup your Favorites):

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

   

• HP LaserJet M4345 MFP: Network printer problem: cannot print, but can ping

  Good evening

  I have a big problem. We have a network HP LaserJet M4345 MFP printer. It is connected to a switch and the switch is connected to a Modem of Telmex.  It has a static IP address. 5 computers to connect to this printer, but I'm going to use one as a sample.

  The problem is that I can't print anything.

  • I can install the printer in all computers
  • I ping the printer
  • I can access the printer configuration using a browser
  • I can even scan a document

  But I can still print the test page. We have a static IP and it does not repeat the IP address, the host name is unique and date everything is fine. I tried to ping to test for the default gateway and it a ping with a correct response time.  So:

  • The configuration of the printer can be accesed via browser
  • The computer can ping the printer
  • I can scan a document to the PC
  • The printer installs very quickly in all machines
  • The printer can ping the default gateway
  • The IP address and the host name are unique

  What could be the problem? I tried to print in all the machines without success.

  Thank you for your attention.

  It is possible that the network adapter has a problem but since it's your only work around would be to buy a direct jet EIO card and put in the EIO slot in the back near where the network cable is plugged.  They are fairly cheap on ebay and you want to buy a 610N, 615N or 620N one of these models will work.  You must assign an ip address that is different from the one assigned to the integrated card.  I think that there is a way to disable the built in network card, but I have to carry out additional research on that.  If you have an old hp printer that you do not use with a network card eio, even if older 600N it will work in this printer.

• LaserJet P1102w - lack of printing problems and sleep-wake duplex in ML

  I have my printer installed via AirPrint, the latest firmware and all that.

  However, the attempt of Apple to a driver treats this as a very basic printer, and I can no longer print double-sided. There also problems waking up to print if it has not been used for some time. I have to turn on the printer, cancel jobs, place them again and hope it works. Sometimes it takes two or three attempts.

  When will they be available for Cougar your real drivers? I want that my printer to work as if it was in SL and Lion.

  Chris

  No, this isn't

  When I run the setup I get to step 'Select device' and the printer does not appear. I connected it via USB for it and still nothing. I removed the printing device configured to AirPrint and the same thing. I installed it using the generic 'PCL' profile via the port USB, and the installation program still shows nothing.

  However... I returned to the page produced and found another download

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80684-8&cc=us&DLC=en&LC=en&OS=219&product=4110396&sw_lang=

  It is for 10.4 to 10.7, but I gave it a shot. Updated the firmware on my printer (again). Now I can add the printer as "HP LaserJet Professional P1100w, 5.0", and the duplex option is enabled and works!

  If this page needs updating to include bones x 10.8. I don't know why it says version 8.0 when the control panel no longer reports as 5.0. Whatever, I print double-sided once again.  I'm a happy camper

  Chris

  PS I am that mark it as resolved because it was in a roundabout way, but not with the link you provided.

• LaserJet P2055d: LaserJet P2055d two-sided printing problems

  I have a new computer with Windows 10.  I have connected my LaserJet P2055d and recognized Windows and the driver PLC6.  I don't have the ability to print double-sided, like I did when I was with this printer with a computer running Windows 7.  Any advice would be appreciated on how to acquire the ability to do double-sided printing.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• HP LaserJet Pro M225dw MFP: Print problems duplex on HP LaserJet MFP M225dw Pro

  Hello, I have a problem with duplex printing. He started only today and no hardware or software has been changed, but now it prints the second side of any printed document asymmetrical. The chisel is always to the same degree. Heres an examlpe of the duplex-printed and scanned document. http://imgur.com/a/uGz23 Hope that you can help me and will excuse me for my English, since this is not my mother tongue.

  Nevermind, the problem was in the cover on the rear side of the printer, paper jams. It has not been closed tight enough, and that caused effect mentioned.

• Windows 7 x 64 Laserjet 1022N printing issues

  Background:  I have three computers connected via a cable network on a LaserJet 1022N.  The computers are running on a domain.  Users have a user access to the computer.  All computers are new and under Windows 7 x 64 with the latest updates applied.  All of these computers have the same problem. A Windows 7 x 32 attached to the computer even works well.

  Problem: When the computers send a print job to the printer, it continually back at work until the job is removed from the queue and the printer is restarted.  If I send a copy out a test page.  It does not matter which application is printing.  We tested with Word, Excel and Acrobat Reader.  It does not matter the length of the document sent to the printer.  We treid a documents as well as multi-page documents page.

  Have you tried to uncheck the option "Enable bidirectional support" in the port real estate 1022N tab.

• LaserJet 1022n printer (spooler Services) question

  Whenever I try to print, I get an error message that the spooler sirvice does not work. I use the troubleshooting to fix the spooler, but he won't stay fixed. My print screen won't let me choose the printer, it's a LaserJet 1022n.

  Can you please try the following:

  (1) Press Win + r (run the window will open)

  (2) type "services.msc" and press ENTER.

  (3) in the window that opens, locate the "Print spooler" service

  (4) make a right click on the "Print spooler" service and select 'Start Service'.

  If the spooler service was stopped, then this should help solve the problem.

• HP Laserjet 1022n, 1022nw printers shared cannot print

  Hello.

  We have a number of these printers shared on a Windows Server 2003 server for Windows XP clients.

  We use Windows Server 2003 Service Pack 1 on certain print servers and Windows Server 2003 Service Pack 2 on the other.

  Some of them work, but some refuse to work. You will get the first page to print, and then print queue will be for more claim to be printing, when it is not. Restarting the spooler service will reset things. I can't what is different between those who work and those who are not, well on the same network, it seems that no 1022 will work at all. I've tried three different Windows 2003 servers, and they all fail.

  Printer drivers that I use are the last leave the HP website, and I have firmware updated printers also.

  I use a Standard HP TCP/IP port.

  I found that they seem to print correctly if shared on a Windows 2000 Server, but it doesn't really help me.

  Can anyone suggest anything please? We have been obliged to the coil of a number of them out of Windows 2000, but this should be temporary.

  Thank you very much

  Paul.

  Hi Rick.

  I spent some time on this investigation via google but also experiment with the drivers, and it seems that if you be wrapped this printer from a Windows 2003 server and that you have the latest MS patches, then you can print only if you have administrative privileges on the server. It does not matter at the end of the workstation. However, it seems that some of our printers are not affected, and I can't believe that users who continue to print well have administrative privileges on the server.

  Anyway, there is a simple solution to this - use the Laserjet III of the original distribution of XP driver. This driver appears to print very well to the 1022.

  However, it would be nice if HP has acknowledged the problem somewhere and eventually created new drivers. I see no evidence of this on the internet.

  Hope that this workaround works for you.

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Problem with printer Laserjet 4 M Plus printer

  I have a Laserjet 4 M Plus printer which I had connected directly to my office with Windows 98.  The printer worked fine with the office.  Well, I've upgraded the desktop of Windows XP and now I can't the printer to print at all. The printer has been added to the desktop, but it will not print a page to test the computer or any program at all.  Your help is greatly appreciated in getting my printer works with XP.  Thank you!

  Message edited by cvanderhoef on 12/21/2008 13:28

  Let this step by step, as we do for the 1st time

  1. set up your printer (cords & cables)

  2. turn off the computer

  3. connect the parallel cable or usb

  4 turn on the computer

  5. turn on the printer

  6. place the disc in

  or install from windows printers list

  Download of HP or

  7. open the folder "default" printer

  8. check the cable port

  example: printer properties

  tab select "Ports".

  9 look for ports using its

  the ports are: "the LPT1 printer Port:

  "USB: printer name?

  Make sure that the port is checked in the box of

  10. click on the "General" tab > "printing preferences...". »

  11. Select "advance" tab tick to set lower resolution

  that i had this problem on one of my printer

  because the high resolution would never print

  12 OK and test print the printer if successful

  13. click OK final

  14 perform the normal functioning of every day as everyday u

  15. good luck

  Message edited by rickp400 on 06/01/2009 12:49 AM

• My printer (laserjet m1210) continues to display error memory power

  My printer (laserjet m1210) continues to display error memory power. What is and how to fix it?

  Hello world

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• Printing problems with my HP LaserJet 3200

  I'm having a problem with my HP LaserJet 3200. Or maybe with my laptop? Sometimes when I try to print, it shows an error in the printer status area and no ready button flashing on the printer. If I cancel the print job, disconnect the USB printer for 5 to 10 seconds, plug it in again, and then click Print - it works. I can print, copy and scan, so I'm hesitant delete the printer and add it again. I use Windows 7 64-bit. I have the above work around, and this may seem trivial it will work eventually, but I was wondering if anyone has any ideas to solve the problem. Thanks for your help.

  Hi Jwill,

  Thanks for posting on the Microsoft community

  We understand that you have problems with printing. We would be happy to help you with the problem. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates. This tutorial does not cover printing problems related to specific applications. Printing problems can be caused by cables that are not connected correctly, problems with the settings, damaged or adapters wireless or incompatible printer drivers or missing updates.

  In order to better help you, please let me know some details:

  What is the error message you get when the printer no longer works?

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: delete the printer spooler and select the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
   
  Method 3: you can follow the link that will help you solve the problems with the printer below.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please reply with the results so that we can help you.