LaserJet P2015d: Laserjet don't feed paper unless I opened before each time

Hi all, I recently have a problem with my Laserjet P2015d how can I get to print each page of a document, I need to open the hood before (like matching the ink cartridge) and then close it to print the next page. If I do not open the lid before you start printing, it light-error with a flashing orange alert indicator. It does not send the error codes to the computer but then I don't really see what it is. But from what I hear, it tries to feed the paper from the cassette, but fails, unless I opened on the front, then close it and for some reason it work just for a single page. When he tries to move to the next, he fails again. How could solve this, or is it a bust? Thank you

When the bin is full the indicator says it's because the metal tray is all the way at the bottom of thie plastic frame, i.e. where he sat when he was full of paper and the drawer is closed.

When you first put all paper in and looking at the indicator is shows a full tray until you close the drawer, then when the paper raises it shows the actual level.

So at this point, that looks like you close the drawer, then paper comes up, if there is not a lot of paper in the tray it will feed a sheet but the mechanism which is to follow the set allows to fall and you get no paper feed more.

So, you could have actually just a defective Board.  If you can find another P2015 to borrow a tray, can you could test.

Tags: HP Printers

Similar Questions

  • Why Firefox keep resetting my homepage to Google? I DON'T LIKE TO HAVE TO ADDRESS WHY EACH TIME I PULL UP OF FIREFOX

    I don't want Google as my home page, or use it as my default search engine. WHY IS that Firefox is constantly reset my homepage to Google? I hope no more Google, so I DON'T want TO HAVE IT as MY HOMEPAGE. It's really pissing me off to have to return my homepage almost everytime I open Firefox. In addition, I have my anti-spyware configured to block any attempt to change my homepage, and I see the warning popping up almost every 20 minutes. This is NOT acceptable and begins to make me question YOUR credibility if you put in your service to the things that are reached that the user very clearly and in a targeted manner wants.

    I've been a user of Mozilla for something like 18 years. This latest version is the FIRST TIME that I felt like your service is less above board. Fix it, or I'll find something else. I won't be using a product that ignores my intended way of use. I only give you the way to lea to solve this problem, because you have (at least appeared) reliable up to this point. My patience is not long in this respect.

    I'm sorry that you are having this problem. I can assure you that we will be using the homepage of your choice, and w are not even in partnership with google, because it is not something that Mozilla did it on purpose (that we will always respect your choice to the user)

    I would try the following:

  • I don't want to take a book address each time I send or forward. How default to all my addresses?

    Thanks for the idea of F9 return addresses. Such an easy solution. Now, I need to know how to avoid the step of picking an address book every time. Assume that there is a defect or something. Seems maybe lazy, but it's a pain in the neck.

    Thanks for your help.

    I like the list. If you do not, you can do it come or go with the F9 key. (I know only through a Mozilla support guy).

    I hope that what you say about them fixing my problem is true.

    Follow-up: I've just updated to Windows 10 (like) and sent an email. He did hold the book that I chose. So much better. Thank you...

  • Can I feed paper manually at the top of my HP Laserjet 3050 or is this slot just for scanning?

    I'm trying to print an endorsement on the back of a cheque.  Can I feed paper from the bin to the top of the page where you are scanning from where is - this just for scanning.

    MorningCall, the scanner has the function of copies/scans only and can not transfer text on the control.

    I hope this helps!

  • LaserJet IIIp accordion pleated paper

    My LaserJet IIIp was a special paper feeding problem.

    It feeds paper out of the slot to eject before without problem, but out of the rear slot, the last third of each leaf looks like a sweet accordion fold or pleated in flange.

    The problem is definitely in the last set of rollers.

    If I eliminate these rolls the feed is good, but the leaf does not come completely out of the machine. (I ran some tests with the lid removed to prove that the entire sheet is printed and smooth (and) all the rolls before the last series comes...

    I don't understand why the first 2/3 of each sheet comes out of the printer smoothly but the third last undulations.

    Does anyone have a suggestion as to the cause?

    Nice to see that some HP products are capable of longer than a few years.

  • LaserJet 5200tn tray 3 paper jam

    I have a Laserjet 5200tn who gets a tray 3 paper jam, each time, prints fine from Tray 1 and 2. Page feeds on tray and stops with the leading edge just below the exit rollers. I replaced rollers pick up in tray 3 and checked for obstructions the paper path, no effect. Any help would be appreciated, I'm stuck.

    Hi DeweyE,

    I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

    Hope this helps, have a good!

  • My charger auto A910 don't feed? Can someone tell me if/when it can stick

    My charger auto A910 don't feed? Can someone tell me if/when it can stick

    When you say it "self loader feed", do you mean the ADF on the 8500 a top or the way main paper for printing?

    Do you mean that the appliance blocks or it won't pick up the paper?

    * If the unit is interference (true or false) the steps are the same, and one document can be found here.

    * If the unit is not picking paper and giving an error Out of Paper, then you can find a document for that matter here.

    * If the ADF blocks (true or false) you can find a document for this here.

    I hope this helps!

  • Do not feed paper for incoming faxes, officejet pro 8600 premium

    I have a HP Officejet Pro 8600 Premium.  Recently I started having a problem with my incoming faxes.  An incoming fax comes through, and when it will feed the paper to print, it shows on the screen that it is paper.  He goes through the process of trying to feed paper through and makes the sounds, it does usually when I am out of paper in the feeder, but I'm not.  It prints and copies fine.  Just having this problem with the incoming fax is not able to print.  Help!

    Too bad!  I found the problem.  This is a printer 2 bins and sort my incoming faxes were trying to feed from the 2nd drawer (which was empty).  I have no idea how the setting has been changed, or how to restore it, but I'm not worried about it, now that I know what it is.  I was able to print any faxes that never came through (all 24 of them, Ouch!)

    Thank you!

  • Printer does not feed paper

    I have a HP Officejet 4500 wireless all-in-one.  I was able to print until recently, and he stopped feeding paper, what can I do to make this work?

    Hello

    This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

    Good luck!

  • hp8550 will not feed paper

    My Hp 8550 stopped feding paper. What can cause this?

    my printer will not feed paper into the printer.  He just left.  What's wrong?

  • 7410 ADF, do not feed paper

    7410 ADF will not feed paper when copying or facsimile.  Error message says "Reload documents and then restart of work".  Rollers and sensor have been cleaned and the ADF is free of debris.  The upper roller in the ADF continues above the test or tests and does not lower to pull the paper into the printer.  I need to replace the ADF?

    Hello

    I understand that you have an Officejet 7410 who straightens not paper in the ADF as long. I'm sorry to hear what is happening, but I will do my best to help you.

    There are no replaceable parts in general in the ADF, but we sure to check the web page HP PartSurfer .

    Looks like you have tried most of the steps within this ADF (ADF) does not Pick Up paper , but I will include it so you can check yourself.

    Since it is the roller itself that is not declining, the printer may require a reset. Please read this privacy statement for HP: http://bit.ly/pCUQT7 and continue to check your Inbox for a partial reset steps.

    Hope this helps, have a nice day!

  • Amazon "click to buy" don't touch any funcion & not visible. Same time: an unknown icon will appear to the side of rt of the toolbar. It cannot be deleted.

    Win 7 & FF 28/29. Beta feeds. I noticed the icon first time only two days before. It is square in shape, the size of the icon menu; with a flag with a star of five PT in the Center. Always in last place on the toolbar. RT clk: the removal of the option toolbar is dimmed. CLK on icon: it stirs and the furthest side of the toolbar tab rt move. No other observed. Once, the duplicate icon. SafeMode FF: icon does not appear. But Amazon buy button remains disabled/non-appeared. This problem IS NOT to occur on IE - the purchase was made.

    My guess would be that it is linked to bookmarks / favorites...

    Maybe Add to Wunderlist:

    Perhaps the gray appearance in the toolbar means that it is not currently connected to the mother ship?

  • don't want to skip the option 'save' or 'open' before downloading

    I clicked by mistake on a box last when I downloaded something such that now when I want to download sth, it directly shows the dialog box of "file who want to download to", but I like to choose "save or open" before you save it somewhere in the files.
    How to put in... Thank you.

    Change the action 'Always ask' in tools > Options > Applications

  • What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

    What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

    If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

  • HP officejet 5740: printer will not accept to and numbers and say it often a paper tray is open when it is not

    My 5740 will not accept and to the numbers in the boxes provided, as I tried to print a PDF allaient17 to 27 pages and he kept going back and print pages from 16 down. Allso sometimes it stops printing a paper tray is open when it isn't.

    Any help will be most appreciated.

    mny TKS.

    Mant tks Dragon fur, I'll give that a try serious and get back to you with answers solved.

Maybe you are looking for

  • Capture video from Canon Camcorder-DVD - computer laptop crashes!

    My Canon DVD camcorder is connected to my laptop via a firewire cable using the port of the smart card and a standard firewire adapter. The laptop (Windows XP) recognizes hardware Plug and it is successfully activated. However, right now, I'm trying

  • The TCP 1 layer and Layer 2 Communication

    Hello I'm looking for possible ways to communicate on the layer 2 and layer OSI 1 (physical layer and layer of data binding). I have a this equipment with host interface is ethernet, this device works on OSI layer 1 or Layer 2 or we can say that work

  • Acer laptop stuck on Windows 7 update 31 of 31

    You just bought an Acer brand new and when I stopped it are stuck on update 31 of 31. I called Acer support and they said I have to reload Windows and that they won't support anyone who chooses to make updates?I've just turned off and all is well so

  • The OAM Console in a deployment architecture high availability

    HelloI'm looking to implement a HA for OAM environment and read the various docs that the OAM console is deployed on the AdminServer. However, when I read the Oracle documentation on Oracle Fusion Middleware high availability Guide for Oracle Identit

  • Adobe Acrobat X 1 will not Samsung printer scan

    My acrobat pro x 1 will not print scan. Indicates error during the scan. If it please restart the program or turn off the unit, then turn it on and wait while it heats up. I downloaded all the latest downloads, but still have questions? I also made s