LaserJet pro 200: location of the country of my printer was incorrect

Similar Questions

• Color HP LaserJet Pro 200 M252: clearing the jammed paper

  Printed paper is stuck between the back door of the printer and the output area and is not reachable to clear for further printing.   I can't access this area.  How can it be erased successfully.

  Hi @trevorat10 ,

  By your post, I see that you have a paper jam from the rear door of the printer and the output area. Want to know how to remove it. I want to help you solve this problem.

  I'm sorry, but I can't find a color HP LaserJet Pro 200 M252.

  When the printer was purchased?

  You may color HP LaserJet Pro 200 M251 model?

  Please call our technical support at 800-474-6836 if the printer is still under warranty for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

  I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

  Hi @g33kyg1rl

  Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

  Please follow the steps listed below:

  1. Connect to your HP account connected, which will take you to the Welcome screen.
     
     
  2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.
     
     
  3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".
     
     

  Please let me know how it turns out.

• LaserJet Pro 200 M276nw: Changing the print settings

  I want to print in black only.  When the print dialog box appears, the ONLY option is standard. There is no color/quality Option or the Option advanced as indicated in the manual.  There is no manual control.

  When I open system preferences, as suggested, I get the screen which gives me once again NO parameters.

  

  Hello
  Follow the steps below to print using black ink only, these are accessible from the print itself, dialog not print & Fax:
  
  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.
  
  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  3. Select Type/quality paper in the menu dropdown.
  
  4. you may need to click the triangle next to color Options of spending parameters, you will find the levels of gray or black in this dialog box.
  
  You can save the settings for later use by clicking preset > save current settings as preset... a used preset by default remains until you select any other preset.

  Shlomi

• LaserJet pro 1415: cannot open the cartridge door and prints have red lines on them

  First problem was the red lines on the printed pages, now I can't open the cartridge door

  Just to close the loop, we decided to force the drawer open, because the printer was unusable anyway even if we have something broken. With a lot of pressure, the drawer open. We then tried to print something and a message there is a paper jam.  We opened the back door to clear paper jam and off broke a spring and a broken then only plastic parts. We cleared the jam and thought that the broken part just came to the door but was clearing of the works.  Then we printed out a page and everything worked fine.  If the door does not close completely because it is missing a piece, so what? The printer works fine. Thanks for trying to help.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• LaserJet Pro 200 color M251nw: Toner

  I just replaced my HP LaserJet CP1215 with color HP LaserJet Pro 200.

  The used CP1215 of toner in the CB540 series cartridges.  I still have unused capacity in them.  The M251nw uses the CF210 series cartridges.  They look the same.  Can I use the CB540 instead of the CF210?

  The cartrdiges CF210 and CB540 are not interchangeable. You will need to CF210a or high capacity CF210x series as it is stated on the Site of HP SureSupplycartrdige.

• HP Laserjet Pro 200 m251nw: I've got streaks printing on laserjet 200.

  All of a sudden, I have red streaks, printing on the right side of my documents. I tried using the cleaning page and it doesn't seem to help. I also have small black dots in various parts of the document which keep appearing on my documents. Cleaning that does not either.

  It seems to be a residue of red on the sponge roll just before the paper out of the printer. How can we clean this roller or must it be replaced to correct? I used my vacuumn to try to clean it up, but it doesn't do any good.

  Need help.

  Hey @AlaskaMariner,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of magenta print quality printing of your color HP LaserJet Pro 200 M251nw of the printer. I would like to help you to solve this problem today. Thanks for the troubleshooting steps you have already tried before reaching out for support, including.

  On this model of printer there no zones in the product that you can clean it manually. The only method supported this printer paper path cleaning and area of the cartridge is running the cleaning page. You may need to run the cleaning a few times page to fix this.

  Sometimes red streaks can be caused by a low toner cartridge. When toner is low, it can gather in some areas inside the cartridge and create a "streak". I can have you hold the cartridge by the sides and shake it gently from left to right to redistribute the toner. Once the cartridge has been shaken, reinstall the cartridge. Once your cartridge is re-installed, please test print to see if the problem of dragging is still happening.

  If the problem persists you can please click here for the steps of quality supported by your printer. "Once the document of support opens please run through the steps to"check toner cartridge status"", "make the diagnosis of additional print quality" and "inspect the drum unit for damage".

  If the quality issue persists you may need to try a new HP authentic to verify whether this problem is caused by a magenta cartridge faulty cartridge or the printer.

  The black dots that you see are often caused by a dirty paper path roller or fuser on your printer number. As mentioned previously, the only way to solve a dirty paper path would be to run several pages of cleaning. A defective fuser unit would lead to a replacement of the entire unit.

  Please reply to this message with the result of your troubleshooting. Good luck!

• LaserJet Pro 200: Impression of dark color LaserJet Pro 200 m251nw

  I recently bought and installed a printer of Color LaserJet Pro 200 and have noticed that when I print anything either in the color of the image is very "dark".

  When I print the example page, via the touch screen, the image seems very bright and vibrant. However, whatever it is printed via my computer throug h that an application is dark with almost oversaturated colors.

  I downloaded and installed the most recent driver from the HP site and nothing has changed. The printer is connected wireless to the home network and I tried not directly connected to the computer at the moment.

  Any suggestions would be greatly appreciated.

  Hello

  In the Printing Preferences screen (click Properties or settings of the print dialog box in the application used to print to access printing preferences screen), try disabling the HP EasyColor option in the color tab.

  Also try to select the themes of different colors like photograph (sRGB) or Photo (Adobe sRGB).

  You can see any difference with the results then?

  Shlomi

• Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

  I just purchased and installed a printer LaserJet Pro 200 color M251nw.

  From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

  Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:
  
  In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
  http://support.HP.com/us-en/document/c01663233
  
  Kind regards
  Shlomi

• LaserJet Pro 200 M276nw: lost password cannot reset the printer

  Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

  Hello and welcome to the community of HP @MsBz,

  I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

  To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• the Laserjet Pro 200 MFP can print on 110 lb card stock?

  The all-in-one Color Laserjet Pro 200 can print on card stock 110lb?

  Hello

  The following specifications matrix info shows:

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5097655#! tab = specifications

  Weight, supported

  60 to 163 g/m² (up to 220 g/m² with HP laser glossy photo papers)

  Recommended media weight

  60 to 90 g/m²

  With the help of the following conversion

  http://okpaper.com/calculators/lbs-to-GSM

  110 lb = 162.8 g/m² or 163 g/m²

  This can work, a bit tie, no room for error.

  Kind regards.

• no WiFi in the Laserjet pro 200 M276n option

  Hi all

  I have just purchase HP Laserjet Pro 200 color MFP M276n, I managed to install and print documents using the USB connection.

  However, the printer is equipped with WiFi option that let's you connect the printer to a wireless network, or print directly from a WiFi device (smartphone, laptop, etc.).

  The problem is, I can't turn on the WiFi option. In fact, there is no option on the control panel of the printer for wireless connections.

  The manual gearbox and hp.com site all indicate that this model has a wireless connectivity. Even when I turn on the printer, I can see that there is a small WiFi symbol that lights (blue) on the control panel of the printer, which indicates that the printer is equipped with WiFi connectivity. But the light goes off again after that the printer is on and I can't find a way to turn it on.

  Help, please

  Thanks to you all

  The section of the overview of the specification document for the LaserJet Pro MFP color 200 M276n States:

  ""Set up and share anywhere in the desktop with Ethernet wireless and high connection".

  but this phrase is qualified with two links to notes; the second of these information States:

  "Wireless direct printing, HP Auto Connect Wireless and integrated wireless connectivity are only available on the HP LaserJet Pro 200 M276nw MFP color"

  If your model of "n" has no wireless capability; you need the model "nw".

• Color LaserJet Pro 200 M251nw incorrect location

  An incorrect location for the printer M251 will affect app availability, technical support options, and a few other things frustrating. The LCD touch screen is a little wonky on the first Setup, and we accidentally chose a different country of our desired first config entry. Applications available in the connected site hp corresponding to the location set in place on the printer.

  This is different from the language selection. Even if we had the correct language selected, the printer reported itself to be in a different country of actual usage.

  There is no parameter of the web page of the printer and not reset will eventually ask or allow you to change the code.

  Solution to be posted then.

  To solve this problem (and potentially other set incorrect configurations), it must first make a backup of the configuration of the printer. This is done through the web pages of the printer, on the System tab, and then save and restore in the left navigation pane.

  Once the file DeviceSave.xml is downloaded to your computer, open it in your text editor or XML editor. Attention, bad parameters in this file could cause problems with your printer configuration. Proceed with caution!

  In the final stanza, finding the

  Change to the

  enabled
  

  Just add the word licence between the tags. * NOTE * there should be no space between the dd: and the DeviceLocation. This editor to please to do an emoji on this combination and it looks like this ddeviceLocation. Probably best to do not copy / paste the above lines.

  Save and close the file. Back in the web pages of the device, on the backup/restore page, under load and restore the settings of the device, select the file comes to edit and click on the Load button. The printer should immediately ask the location of the country.

  Good luck. Calibrate the touch screen. Make a new backup.

• Add networked LaserJet Pro 200 to ePrint

  I can't add my new Color LaserJet Pro 200 M251nw networked to ePrint.  When I try to follow the iPad on the orientation of the screen, after entering the printers IP address he wants then connect to Enterprise ePrint.  I don't have it.

  My older inkjet has been on ePrint, no problem.  Help, please.

  Hello
  You try to use the HP ePrint Mobile's application or e-mail ePrint service?
  
  If you try to start with the email ePrint service, take a look to the following document:
  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903
  
  If you try to use the HP ePrint on your iPad app, I would recommend a look at the following document:
  http://support.HP.com/us-en/document/c01616126