LaserJet Pro p1606dn: "LaserJet Service' service error

Similar Questions

• M475dw multifunction color HP Laserjet Pro 400 - 49 Service error

  I get the error "49 service error" when printing any PDF from adobe acrobat reader document is DC

  If I print the same document from the same network share on the same printer using the player of acrober (no), it prints very well. Go figure.

  PDF is adobe.  First thing would be to update the firmware of the printer or change the PostScript driver from adobe.

• Service error 49 - Turn Off, then on - LaserJet Pro 200 M276nw

  I was the addition of another post for a different printer but didn't want to Miss anyone with MY printer problem.

  UPDATE * (at least for my LaserJet Pro 200 M276nw)

  I found the cause but will need help from someone at HP to "solve" this one...

  My new guard M276nw throw a 49 Service error, CAT has given a lot of power, voltage on, wait, try again blah blah blah, blah blah fuser problems. 10 minutes from the forum search put me on possible wireless network issues with other printers and the SSID. Anyway after regaining a printer Staples and saw the problem coming up again on a new another brand... I tried the search Forum and Tada! at least I was able to find a cause.

  I have a D - Link DIR-825 wireless router. He has dual band (2.4 GHz and 5 GHz).

  Normally I enabled for the multitude of devices that people have these days in my house.

  I updated the firmware to the last update (20121026) and then restarted.

  Roger restarted shortly after error Service 49.

  Then I disabled the two strips to test each independently wireless band.

  The printer acted normally so I decided allow each band separately.

  When I turn on the 2.4 GHz band in the router, the printer immediately throws an error in Service 49.

  I tested several times (5 to be exact) and every time when the router restarts the printer says error.

  So, I left off 2.4 GHz band and then the 5 GHz band.

  I activated the band 5 GHz 3 times and turned off and found no effect on the printer (at least in a 5 minute window).

  So now I'm left with only a single band wireless router or printer who likes to turn on every 20 minutes or more.

  There is probably a setting (or 2) which can be changed in the router or printer that can prevent this (I hope).

  I just need to find the right person in HP...

  I should have updated this thread I'm sorry, but I found myself updated the same problem on another thread of printer M251nw, since someone has answered that one. I have to keep that one thread - sorry, but it seems to me that I just heard another as well, but for a m475dw as well. Maybe the same problem that I don't know.

  Anyway to update my m276nw situation: After experimenting for a while try to limit I decided to eliminate the possibilities by disabling my router another suggestion of posters to remove the printer from the wireless environment and reset to factory settings. So I turned off my 2.4 GHz band in my router (leaving 5 GHz active), reset the printer and it was sitting still (no reset), he even went to sleep normally. I turned on the 2.4 band and the printer immediately threw the error repeated tent kept the same result no way to leave on the 2.4. The next day so I decided to check my router and found 2 year old firmware. It took several updates to get current and on the last I didn't reset the printer to the factory again and there's no error yet. The printer acted normally for a week, he normally sleeps and wakes. It was turned off (on purpose) a few times and everything seems normal.

  I have not activated wireless again since my house is wired and I could really do without wireless capability, but eventually I want to know.

  My DLink DIR-825 router is still active with both tapes, but using the latest firmware, like the new printer (the other). Is all this took?

  Perhaps.

• LaserJet Pro 400m401n: Service error 79 HP Laserjet Pro 400 m401n

  Service error 79 error code.

  Printer does not print Web sites or the other. Authorized the printing that and restarted, same thing.  Sometimes stopping and restarting with to produce a page.  I tried to reinstall the driver. NO GO.

  In addition, it seems that everyone in this forum to have this same problem Service error 79 are on a network.  This printer is NOT connected to a network.  It is only connected to a desktop computer at home via the USB port.  If I disconnect the USB and power Off / On, it does not show an error. The computer is running Windows 7 PRO.

  Any help would be appreciated until I throw this thing out the window.

  Thank you!

  T.

  Suggest you do the following as it works very well without connection to the pc.  I would completely remove the printer from the computer and if you have the original disc supplied with the printer, use the scrubber on the disk utility to delete all files for the printer.  I then turn off the computer, turn it on and reload the printer according to the instructions from HP.  After the printer is busy, I would download the latest firmware version for your operating system and to update the firmware and see if the problem has been resolved.  Most of the time the 79 issue is caused by a bad print job which confuses the printer and makes the error.  A bad print job most of the time is caused by trying to print a web page that contains the latest code that your firmware version is not satisfactory if more aged.  Sometimes pdf files can cause a problem and generally using the postscript driver will solve this problem.  Good luck.

• 79 Service error on Printer series color LaserJet Pro 200 M251

  I use this printer with the operating system Mac OSX 10.9.4 for about 9 months.

  Now, I get an error message from the Service 79. I tried to turn off the printer and the several times without success.

  Curiously, when I try to print a document, a message keeps appearing on my computer that says "the printer has been suspended. You want to resume printing? "When I click on the button resume, nothing prints.

  The manual States that the 79 Service error message is related to a firmware issue? Do you know how I can fix this problem?

  Thank you very much

  Stone

  Hi NebraskaPierre,

  By your post, I see that you have found a Service 79 error on the printer. I can help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  This can be caused by malformed PostScript documents.

  Follow these steps:

  Locate the power switch on the bottom of the printer.
  Turn the printer off position and COUNT to 10.
  Turn on the printer and the system should be all together.

  Try printing from another application to see if you have the same problem.
  
  If a print job from your hand repeatedly causes this error, this may indicate a problem with the print job.

  Try to split your document upward more before they print it.

  Fix permissions of the drive on the Mac:

• HP Laserjet M277dw MFP: HP Laserjet Pro M277dw - low memory/job cancelled MFP & 49 WINDOWS service error

  Ok.  I've seen other messages with this error.  But I think mine is a little different.

  The problem: Prnter will not print anything at all, even a test page.  It will not copy anything either.  Low memory - cancelled job message comes up / have worked perfectly for 2 days, and then it started.

  Printer is connected via the network (wired), but I have tried wireless also.

  Software is installed on a machine windows 10.

  In addition to the windows machine, print requests are sent to her through the network via an iPad and an iPhone.  HPeprint is also used.

  Troubleshooting: I did the following in trying recify problem:

  Printer disconnected everything on during 30 seconds.

  Reset the default printer

  Redid the installation of the network via the touch screen

  Deleted printer in windows and deleted driver packages.  Reinstalled using the supplied software.  Also tried to install using "add a printer" in windows.

  Possible corrections that do not go to work or to me:

  Put in place as a printer IP - he loses the feature and choose but in addition to the drivers manually to scan etc...

  Connect via USB to the computer - if I do this do not lose the ability for the iPad and iPhone to print on the printer - or at least makes this dependant on the computer is turned on and sharing put in place

  I will say that after I tried to implement the prnter using "add a printer" in windows, I couldn't get the printer to print the test page - nothing happened, but did not get the memory error message.  I removed from the print queue and even deleted all the files in the subdirectory of coils in system32...  ButI cannot get rid of the printer now under "devices and printers" in the Panel...

  Help, please!  Pulling left what my hair on...

  Thank you

  THIS PROBLEM HAS BEEN RESOLVED.

  After several weeks of rtying many different things to fix problems

  (1) after installing the new modem Arris double band by carrier Internet, printer would no longer.  First issue was an error of memory.  After reset printer would no longer at all

  (2) I tried installing and uninstalling printer wireless in several ways, ethernet and USB.  Printer would never even print a test page.  Attempts to print the pages of any other report or configuration would result in the 49 service error

  (3) BrightHouse (carrier) was 3 separate times to tweak the modem, try to uninstall and reinstall the printer, etc.

  The problem turns out to be that with some modems, HP can not communicate over IPv6 with modem you (they don't play well together using IPv6) either because of the HP or the modem, HP likely due to the fact that he always seems to be HP printers with this problem.

  Here are the steps I took finally solved this.  Please note that the solution came from a technician BrightHouse to a different Web site.  I'm just passing along the info in case it helps others:

  (1) completely uninstall the printer from the PC, including the printer, he installed all the software, drivers and all the ports that you may have created trying to recify problems

  (2) to shut down the computer

  (3) disconnect the ethernet cable from the printer (as applicable)

  4) click on the reset button on the home screen to reset to the default values for the printer

  (5) do a cold reset the printer (people of email support the HP for the procedure)

  (6) on the interface of the printer (screen), go into the settings; network settings, network services.  Here you will see IPv4 and IPv6.  Disable IPv6.  Don't mess wth IPv4 (leave it on).

  (7) plug the ethernet cable into the printer or activate/configuration of wireless settings using the printer (screen) interface.

  8) turn on the computer

  (9) install the printer using the CD that came with it or installation software downloaded from the HP website.

  I'm not sure that each of these steps is absolutely necessary, as step 4, but that's what I did...

  I saw so many messages on the internet with HP printers not install correctly and launch a 49 service error instead.  Not sure how those problems, This applies.  But HP needs to fix this issue with their printers IPv6 or at least try to find the cause...

• HP LASERJET SERVICE and CRASH of WINDOWS 7 PRO

  My windows 7 pro 64-bit lock every so often and when I restart and run Windows Reliability Monitor there is always a critical error 'HP Laserjet Service' that stopped working when the accident occurred.

  In msconfig/services, the checkbox is selected and the status is stopped.

  This critical error is still the only listed by the way.

  The P1102W printer and I'm only using wifi.

  Printer still works fine.

  Appreciate any suggestions.

  Hi aelumley , sorry to hear that you still have questions. After the reinstallation of the printer, the icon is now grayed out.

  Have you tried turning on the Laserjet Services in return startup items again to see if that could fix this problem?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  I would run the difficulty it Microsoft tool to see if it will be useful.

  Diagnose and automatically repair Windows files and records issues.

  Sfc/scannow will inspect all the important Windows files on your computer, including the Windows DLL files. If the System File Checker detects a problem with any of these protected files, it will replace it.

  How to use SFC/scannow to fix Windows system files.

  If you have another computer, install the printer on it to see if you have the same results.

  Please let me know the results.

  Thank you.

• HP Laserjet 2420 printer range: 49.FF05 Service error

  Hello

  I have a HP Laserjet 2420 printer and it happens with 49.FF05 Service error.

  Now I can access some menu items through press and hold down the arrow key and do a reset of the cold etc, now with this work not she also throws the message "Printing work Inprogress". I tried that cancel in the printers menu, and the printer will not install on my PC even with the drivers installed so that I can't use the printer with my PC and try to solve the problem .

  So the printer has a pending print job I don't know, also I tried exchanging the DIMM module in other slot and vice versa, but not luck.

  Does anyone know how to fix this error without using a PC.

  Concerning

  Gammyray

  It could be anything from a trainer blown just a print job corrupted.

  Test: Disconnect the network cable and perform a cold reset.  If it's ready, it was probably just a bad impression.  Delete everything in the print queues and restart the PC. It should work OK.

  But: If it still gives an error 49 with no cable and restart cold, you may have questions that can be more difficult than the unit's worth (depending on how well you expenses of local repair company).  You can always buy a trainer on eBay and try to install yourself.

  Work around: go to printers remove the printer.  If you can find out which IP address has been using the printer, the printer manually program and to use another IP address.  Do not re-use that one.  Reinstall the printer.

  Chances are that someone was trying to print a document based on the web.  Files PDF Online is the culprit #1.  #2 are weather bulletins.  #3's etc, etc, because whatever it is printed from an online source can trigger it.

  Make an update of the firmware on the printer.  This will help 90% of these questions.  Then, inform those who need network print or web documents to save to their hard drive first, close the document online, open the saved document and print from there.

• HP Laserjet Pro400 M401dn: the 49 Service error

  Error 49 Service on screen touch printer. Will print no from a Microsoft Office document.

  Have followed the instructions (by HP support) to close printer, unplug the USB and disconnect the power supply to the power surge suppressor and then plug the electrical appliance into the wall socket. Then reconnect USB. All done, rebooted the printer and printed a document internal printer (report Configuration and Menu support) which printed fine.

  But printer will not print a document from Microsoft. Of the 49 Service error. Use Microsoft Office v.X student/teacher edition for Mac (2011).  It was most recently updated, 10 may 2016 with office update 14.6.4. I printed some documents after this update, but now this 49 daycare error appearing.

  Product number for this printer Laserjet Pro400 M401dn is: CF278A

  Any help would be appreciated.

  Steve945

  If you unplug the printer from the computer or network and turn on the fact come ready.  If so, then the print job that is still trying to print or a new print job is causing the error.  Delete all print jobs from any computer that uses the printer.  First upgrade the firmware using the easy firmware updating program.  Then try the same job and see if works.

• On HP Laserjet 3000n 49.4C02 Service error

  Our network printer met an over the weekend 49.4c02 service error.  The error reads as follows:

  49.4C02

  The service error of

  -------------

  Unknown.c

  Line = 0

  -------------

  [PID, TID]

  [12.70]

  ------------

  STLVL 0

  SRVP.Sl a 0040, 108

  ------------

  STLVL1

  SRVP.SL 00409eb8

  ------------

  STLVL2

  SRVP.SL 00402f9c

  ------------

  STLVL3

  LJ.exe 004013e0

  ------------

  STLVL4

  SRVP.SL 00402ea0

  -----------

  STLVL5

  SRVP.SL 00402d6e

  ----------

  STLVL6

  Manager called 2ffff000

  ------------

  STLVL7

  PageMaker.dll 004ebbe4

  ------------

  STLVL8

  PageMaker.dll 004e9124

  ------------

  STLVL9

  PageMaker.dll 004ecff8

  ------------

  STLVL10

  PageMaker.dll 004e9124

  ------------

  STLVL11

  PageMaker.dll 004ece4c

  ------------

  STLVL12

  PageMaker.dll 004e9124

  ------------

  STLVL13

  PageMaker.dll 004ece4c

  ------------

  STLVL14

  PageMaker.dll 004e9124

  ------------

  STLVL15

  PageMaker.dll 004ece4c

  ------------

  STLVL16

  PageMaker.dll 004e9124

  ------------

  STLVL17

  PageMaker.dll 004ece4c

  ------------

  STLVL18

  PageMaker.dll 004e9124

  ------------

  STLVL19

  PageMaker.dll 004ece4c

  ------------

  STLVL20

  PageMaker.dll 004e9124

  ------------

  STLVL21

  PageMaker.dll 004ece4c

  ---------

  STLVL22

  PageMaker.dll 004e9124

  ------------

  STLVL23

  PageMaker.dll 004e9314

  ------------

  STLVL24

  PageMaker.dll 004b6fa4

  ------------

  STLVL25

  PageMaker.dll 00500af0

  ------------

  STLVL26

  PageMaker.dll 004b73c0

  ------------

  STLVL27

  PageMaker.dll 004f8658

  ------------

  STLVL28

  PageMaker.dll 004a900c

  ---------

  BATTERY END

  I tried to disconnect the network diagnostics and printing to the printer and it worked well.  Also, I swapped the ethernet cables and uses another port, but as soon as I plug the printer in I get this error and the printer hangs.  I can ping the printer's IP, so it seems to be able to communicte with the network very well.

  What should I do to fix this?

  >... as soon as I plug the printer I get this error...

  Do you mean:

  • As soon as I plug the printer into a power outlet, or
  • As soon as I plug in the printer on the network

  If the latter, then it is very likely that something on your network sends a rogue/corrupt print job, which is severely malformed and causing the interpreter of language in the firmware to crash.

• Driver HP LaserJet Pro P1606dn problem? -windows could not load print processor "HP1100PrintProc".

  I have a Windows 2012 R1 Print Server that hosts a network HP LaserJet Pro P1606dn printer (driver version: 5.0.1.57036). Printers are successfully applied by group policy. He has no problem printing, however, when users log on to a server to remote desktop of Windows 2008 R2 and Windows 7 computers, the following error message appears in the system event viewer:

  "Windows has no load HP1100PrintProc print processor because EnumDatatypes has failed." Error code 126. Module: HP1100PrintProc.dll. If please get and install a new version of the driver from the manufacturer (if available) or choose another driver that works with this printing device. »

  Any advice how to solve?

  I used the HP PCL5 universal driver and this has solved the problem.

  61.130.4.12834 worm.

• Printers HP LaserJet Pro P1606dn is on but does not print

  I have a HP LaserJet Pro P1606dn printer.  It's a USB connection and I also have windows 8.  Since having wind...

  Hi hhj121970,

  What kind of error (if any) you get when you try to print? Did you run print HP and the Scan doctor yet? If this is not the case, click on the link below for more information on the download, installation and running the tool:

  http://goo.GL/7HSWI

• "HP Laserjet Service has stopped working" Message

  I get this message every time I start my PC - I have two HP Laserjet printers installed on this PC, which work very well!  Is it possible to get rid of this message?  Thanks for any help.  Suz

  Please follow the directions to see if your HP LaserJet service is running or disable them below.

  1. type msconfig in run or search programs and files

  2. click on the Services tab

  3 find HP LaserJet Service and see said "operational" in the status column

  4 disable this service.

  You should see the error message disappears.

  

• HP LaserJet Pro P1606DN compatible w / Airport Express?

  I'm going to buy a new Mac Pro and would like to be able to print wireless to a laser printer. I like the HP LaserJet Pro P1606DN, but this isn't a printer wireless, itself.

  I understand after talking with a representative from Apple that a printer non - wireless (assuming he has the correct drivers) can be directly connected to the Airport Express Terminal via the USB port, allowing a Mac Pro with an Airport card installed for wireless printing.

  So I have two questions:

  (1) only the above mentioned HP printer has the correct drivers (or is otherwise compatible) to work with the Airport Express?

  (2) will be the configuration that I mentioned above work, assuming that the printer is compatible with the Airport Express?

  Thanks in advance for any help and suggestions!

  It should work perfectly.  Your Mac Pro is not to be connected wireless to your network to make it work, a wired connection works also (unless the Airport Express Terminal will not on your network, but rather just stand-alone).

• Event M18x R2 Win 8.1 Pro x 64 0, monitor SIMG Service error

  I finally decided to full wipe and a clean installation of Windows Pro 8.1 x 64. All the seeds well but every time you start (cold start or reboot), I get an error in the Windows Event Viewer '0, monitor SIMG Service error event' with the information of ' CurrentVersion = 6.3 ".»

  I have re-uploaded and re-installed the driver of high definition wireless are several times but no change.

  I never got the error under Win 8 and I'm on the victory Dell provided 8.1 x 64 driver.

  Any suggestions as to how to fix this error?

  Should I still have this driver/software?

  Problem solved.  I uninstalled the driver are thd.  My M18xR2 is not a WiDI installed card driver so do not necessary