last collapsed printer microsoft updated 13/08/13

Similar Questions

• Cannot ping local interface after last criticism of microsoft update

  I just bought a Satellite Pro A200.
  When I upgraded to the latest critical updates from Microsoft Update, I found that I could ping is no longer my local IP address. This has happened to the card NETWORK LAN RJ45 and the wireless network card.
  I reinstalled the operating system using the recovery CD, and I could ping to the IP address of the local interfaces.
  But when I again once downloaded and installed the latest critical updates from Microsoft, I can't ping the local IP address.
  Anyone has any idea why?
  Thank you

  Hey Buddy,

  WHERE´s the problem? I know that the updates are the system destroy it when they are buggy, but that's normal with microsoft. I have almost the same problems also! Thhoughts WGAnotify.exe, I was a software pirate and restricted my access to 'zero' access.
  "Yes, Sir, I bought a windows and it s stolen... well... OK... :(."
  Yes, noone except microsoft (who would be the point where I could say "you are in the wrong forum" ;)) knows why it s happening.)
  These days, you should do the following: find update is the cause of this error. You can do this by going in "Add / Remove Programs" in your "Control Panel" and click on the top of the window the button "see the updates.
  Then begin to uninstall the last installed update and check if your ping works. Otherwise, proceed to the next update and uninstall it and so on...
  I know it's a long and boring process, but since there is NO problem of toshiba, you must accept it and try my method to remove the update that is causing your error.

  Welcome them

• Since the last Microsoft updates, download HP printer no longer works.

  Original title: may not print on hp deskjet F4180 after shot, loading of the latest updates from microsoft.  Download driver hp several times.  Microsoft's response is did not recognize the hp logo.

  Can not print on Hp DESKJET F4180, after shot update microsoft, microsoft message is can varify LOGO.  Printer works when I print from my laptop, but not the destop.

  Hello

  1. What is the exact error message that you receive?
  2 have. the updates you installed?

  You can check the number of the update in the update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  The following article might help: printer in Windows problems

• Since the last microsoft update does not have e-mail and internet access stopped

  Vista Home premium

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. turn off temporarily your antivirus, all modules of Norton (if any), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable any third-party firewall, and THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

  2 Uninstall "Cumulative Security Update for Internet Explorer 7 for Vista (KB974455)" via Control Panel | Security | Windows Update | Updates the installed display & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB974455).

  5 reboot > make sure everything in #1 above is activated again and, if necessary, disable the Windows Firewall and enable (or reinstall) your third-party firewall.

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  GLANCE! -Online if your problem is related to a Cumulative IE security update, call the above number and ask to be transferred to the queue of the consumer IE7 (which is 47830).

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Microsoft Update continues to go again and again the same update.

  I downloaded and installed this update of Windows today

  "Hewlett-Packard Company - printers - HP Color LaserJet 4650 PCL 6.

  He seemed familiar. I looked in my history and I downloaded and installed 4 times in the month last successfully

  How to Update Microsoft understand that I already have this update and do not want to download and install it?

  Thank you

  Update has been installed, because there is a green icon against all entries in the story of four.

  If the poster update as installed, and the printer works the way you want, and then suggest that the steps to hide the update.
  You will not find the update of the HP driver by searching the knowledge base, because there is none. You can get the driver package from the
  Microsoft Update Catalog

  Do a search with Hewlett-Packard Company - printers - HP Color LaserJet 4650 PCL 6 as a search term on the MU shows catalog the below -.
  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Hewlett-Packard+Company+-+printers+-+HP+Color+LaserJet+4650+PCL+6

  The latest version was on 02/08/2005.

  Expert MowGreen Windows IT Pro - consumer safety

• How can I activate the installation "hide update" in Windows/Microsoft update

  Last week I was constantly asked to install an update for Windows XP SP3 (security for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241).) It was first installed in October 2010. I installed it 8 times since March 2, but continue to receive reminders. The ability to hide updates is absent from Windows/Microsoft update. How can I fix.

  I am happy to learn that they are all present.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Tip: you can print the following instructions for consultation offline.

  ACTIONS

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/946414 [ignore the title & symptoms].

  1B. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [1]

  2. restart, then IMMEDIATELY...

  3. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan.

  => In the category of updates software optional on the left side of the scan results window, uncheck the KB2418241 & hide ("don't show me this update").

  -Online if an update of root certificates is listed under the category of updates software optional , install it to enjoy greater security of IE8.

  -Online Tip: with the exception of updates for MS Office, do NOT install any other updates software optional , or optional hardware updates. just hide them, too.

  Now, return to the main result window & install other updates listed (if any); Follow all the instructions.

  4. in response to this post with a status report.

  =======================================================
  [1] full Disclosure: the difficulty operating in aggressive mode will remove your update history (to the Windows Update Web site) but not list the updates installed in Add/Remove programs.

  [Last updated: March 6, 2014]

• The HP printer software update repeats

  I've updated to Yosemite on my iMac and the updated drivers from HP and updates for HP 3525 advantage printer/scanner. All connects and works. AP store finds a new "HP Printer Software Update 3.0" update. I installed this update 10 times in the last month, but after installation immediately the same update appears. How can I get rid of this?

  Hey @flynnrey,

  Welcome to the Forums of HP Support!
  
  I want to help you solve the HP printer software update 3.0 Apple that continues to display on your computer Mac OS X 10.10 for your HP Deskjet Ink Advantage 3525 e-all-in-one printer. Please follow the steps below to fix this problem.

  Step 1: uninstall:

  If you initially installed with the driver Package download please follow these steps to uninstall it:

  1. From the desktop, double-click Macintosh HD, and then click Applications.

• Error message after upgrade to Windows XP on the Microsoft Update site

  I have just taken delivery of a Satellite Pro A120 and updated the XP components on Microsoft Update, windows site when the system has restarted to make the changes he developed an error message during the final phase of the start-up of the user.dll Realtek.

  It basically says that user32.dll was written to memory, because the location, as it was stored was reserved for windows components. The file in question is c:windows\system32\hhctrl.ocx, this caused some components of the system sound not working.

  He advises me to realtek comtact for a new dll? The last player on the download from Toshiba site is older than the one installed. Any suggestion please.

  Thank you

  Hi mohamed

  Thanks a lot for this useful info!

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Cannot access the Microsoft Update Site

  I get the following error message when you try to access the update site:

  Microsoft Update could not be installed on your computer
  

  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

  Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.

  [Error number: 0x800A01AE]

  I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}).  I have a small home network wireless, but have no defined group policy (no server - just-to-peer).  The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).

  I don't quite know what to do next.  I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).

  Any help you can give would be greatly appreciated...

  BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.

  Thank you!
  Lorien - a - MCSE/MCSA/network + / A +.

  Hello

  You try to go actually on here Windows Updates site?

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
  sites I posted for you last time.

  Absolutely do not use the default Administrator account. Just make a new Admin account to
  use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
  According to the needs. If your sole administrator corrupts you will have a big headache.

  -------------------------------------

  Run the Windows updates to reset and

  Do the two of them:

  How to reset the Windows Update components? a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  ------------------------------------

  If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
  problem updates.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• (Windows 2000) Error #0x80072EFE when you try to run Windows/Microsoft Update

  Hello world. I hope you don't mind offering support for a Windows 2000 based platform here, (I don't think Windows Update deferred much, if at all between the two operating systems)

  In any case, all of a sudden, I get error 0x80072EFE in Windows Update all of a sudden. I tried several troubleshooting steps, delete the folder C:\Windows\SoftwareDistribution to just reboot my computer. Nothing seems to work, and I hope someone has a step that will be.

  The last few lines (which seem to be relevant to the question at issue) are as follows:

  15:50:21:700 2 508 3e4 PT +++ PT: synchronization of updates of the server +++ 2011-01-22 15:50:21:700 508 3e4 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, server URL = 15:50:21:888 https://www.update.microsoft.com/v6/ClientWebService/client.asmx 2011-01-22 508 3e4 Misc WARNING: send failed with hr = 80072efe. 2011-01-22 15:50:21:888 508 3e4 Misc WARNING: SendRequest failed with hr = 80072efe. Used proxy list: <(null)>list used workaround: <(null)>Auth schemes used: <> 2011-01-22 508 3e4 PT 15:50:21:888 + last proxy request failed with hr = 0x80072EFE, = 0 15:50:21:888 2011-01-22 508 HTTP status code 3e4 PT appellant provided credentials = 15:50:21:888 No. 2011-01-22 508 3e4 PT + Impersonate flags plus 0 3e4 508 15:50:21:888 2011-01-22 PT + Possible authorisation schemes used = 2011-01-22 15:50:21:888 508 3e4 PT WARNING : Methods failed, error is 0x80072EFE, SOAP client error = 5, error = 0 soap code of HTTP status code = 200 15:50:21:888 2011-01-22 508 3e4 PT WARNING: PTError: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: GetConfig_WithRecovery failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshConfig failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: RefreshPTState failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING : synchronization of updates: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 PT WARNING: SyncServerUpdatesInternal failed: 0x80072efe 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: could not synchronize, error = 0x80072EFE 2011-01-22 15:50:21:888 508 3e4 Agent * WARNING: exit code = 0x80072EFE

  If anyone can help, that would be great.

  See...

  Microsoft Update Catalog
  http://catalog.update.Microsoft.com/v7/site/home.aspx

• Error when trying to access the microsoft update web site

  I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)

  I have IE v8.0.6001.18702

  When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:

  • The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".

  The address is different from one attempt to another, but both are still the same as eachother.

  When I close this tab IE grave message box down and I get the message 'recovered tab' normal.

  Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.

  I tried to download and install the latest windows update manually, but this does not solve the problem.

  I am unaware of the date of the last update because I'm unable to access the update log.

  I use a current version of McAfee Anti-virus.

  I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.

  Jacob

  I uninstalled ie8 and found ie7 under him.

  I am able to access the site WindowsUpdate using ie7.

  Jacob

• How to fix Microsoft Update?

  I selected in the Help menu in Windows Live Mail, get updates, which I connected to the Microsoft Update web page. I selected the Express Piority button updates, waited for the find updates feature complete, after which he me connected to the next web page, which displays the following error message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "I chose the option of assisted Microsoft Online Support and typed this question. When Microsoft Update does not work, how it works yet do you?

  I will try to reinstall the Windows Update Agent Installer.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.   Go to the section How to get the last agent to update as it is already installed.  Scroll down to the section on the additional information tab called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4 (I checked that it also works under Windows 7).   Choose one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.

  Good luck

  Barbara

• Microsoft Update 0x80072EE2

  I had no end of problems with Microsoft Update for the last two months on several PC.

  Currently, I'm constantly 0x80072EE2 when looking for updates.

  I am running XP SP3, which was far before this started to happen.

  I tried the fix on KB836941, but nothing helped.

  My firewall is an external box, nothing blocked.

  I discovered that if I go back to Windows Update (by turning off Microsoft Update settings) everything works perfectly, but when I return to use Microsoft Update, the 0x80072EE2 reappears.

  Clues?

  It is not uncommon for this type of error go away on its own.