Latitude E6420 Fingerprint Software

Similar Questions

• Framework of biometric Latitude E6420 - Broadcom USH drivers windows

  Hi experts,

  Ask you to check this old_post

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20278666.aspx#20278666

  I have the same problem, even after you have reinstalled the drivers in the order as suggested by Dell.

  

  I installed "CV_WBF_Setup_Y2GT8_64bit_ZPE.exe".
  [1] double-click on the .exe with option of compatibility in windows 7 and the checkbox on the value

  run as administrator (best option).
  [2] click on ok for a Floder pop-up.
  [3] now install you the driver (this will clear the yellow color material highlighted in)

  Device Manager)
  [4] reBOOT and then install the Firmware (set to the same level provided firmware along

  with driver).
  [5] reboot-> connection (with password :-|) and verify biometric devices in control pannel.)
  you try to check biometric devices in Control Panel and lettering.

  you might get the ERROR below:
  "configuration of broadcom ush host components BrcmFMA.exe - by-side is incorrect.
  Details correct as below:
  Activation context generation failed for "C:\Program Corporation\Broadcom Broadcom

  USH Host Components\BrcmFMA.exe. Dependent assembly

  Microsoft.VC90.MFC, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "wi

  N32', version = '9.0.21022.8' not found. Please use sxstrace.exe for detailed

  diagnosis.

  solution is to install Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64).

  now the problem is that the finger print data are saving :(
  I continued to ask dell support team.
  the big joke, it's what they call it as OFF FIELD.
  :(

  Crazy technical support

  Hi guys,.

  Please see the link below.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485564/20338375.aspx#20338375

  Answer posted by "" P3Sal " "

  OK Dell has finally released drivers for Windows 8.  Its a few steps so here's how I worked on all our machines.

  Uninstall the Dell Data Protection if you have it installed.

  Download the firmware and driver here:

  Driver: www.dell.com/.../latitude-e6420

  Firmware: www.dell.com/.../latitude-e6420

  Extract the firmware and install it.  You must run it in high command line and be sure to select the x 64 Installer.

  Reset

  Once installed, you can install the driver from Dell ControlVault

  Restart and you should now see the biometric device.  The software will be Broadcom now instead of Dell and you can save your fingerprints.

  Kind regards

  Ralu

• How to activate Bluetooth using the switch wireless on dell latitude e6420 (early 2011)

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop "Dell Latitude e6420 run ms windows 8.1". Please help me!

  Your variant of the system doesn't have the Dell Wireless 380 card and that's why it will fail to install.

  Install.

  A21 OF THE BIOS:

  http://downloads.Dell.com/FOLDER01853317M/1/E6420A21.exe

  See notes about the update of the BIOS http://dellwindowsreinstallationguide.com/updating-the-bios/

  Free fall sensor:

  http://ftp.Dell.com/FOLDER01679418M/5/St-MICRO_FFS-LNG3DM_A06_V6681_setup_ZPE.exe

  Intel Chipset Device Software:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=Intel%20chipset%20Software%20Installation%20Utility

  Intel Management Engine Interface driver:

  http://downloads.Dell.com/FOLDER01232584M/2/SWB_DRVR_ME7P1_5M_7_1_70_1205_MR_A05_SETUP_ZPE.exe

  O2 card reader Micro:

  http://ftp.Dell.com/FOLDER01481873M/1/Chipset_Driver_CY8D1_WN_3.0.08.18_A01.exe

  Utility Intel Identity Protection:

  http://downloads.Dell.com/FOLDER00705710M/1/Chipset_Driver_NGH46_WN_1.2.27.0_A05.exe

  Intel Wireless N-6250:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  Intel N-6250 Bluetooth:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034060.htm

  Touchpad:

  http://downloads.Dell.com/FOLDER01669864M/1/Input_Driver_VW486_WN_8.1200.101.134_A07.exe

  Audio

  Integrated

  Driver Intel Ethernet:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24198/A08/LAN_Win8.1_64_19.5.exe&lang=eng&DwnldID=24198

  Intel Video:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24329/A08/win64_153330.exe&lang=eng&DwnldID=24329

  Video NVidia:

  http://www.nvidia.co.UK/download/driverResults.aspx/80210/en-UK

  Intel Device Manager Diagnostics utility:

  http://downloads.Dell.com/FOLDER01433785M/9/DIAG_Network_Intel_A09_x86-6DDVX_setup_ZPE.exe

  Application of Control Point System Manager:

  http://downloads.Dell.com/FOLDER35332M/1/APP_WIN_R312259.exe

  Let me know if all errors remain in Device Manager.

• Audio problem with Dell Latitude E6420 and Windows 8.1

  Hello community,

  I installed Windows 8.1 on my Latitude E6420 and I can get the sound to work. I installed the drivers available for Windows 8, but he doesn't play any sounds. The only thing that works continuously via a browser (e.g. youtube). When I test the device "speakers / headphones ' this is for me a"Failed to play test sound."but the"helmet of communication"device works without any problem.

  I can not activate the device "speakers / headphones" because it blocks other applications (Lync 2013) so I have to keep this option disabled.

  I look on the web for similar problems and it all points to the drivers for the video card (!)

  Is there a version of driver for this model? Or I can not use the latest version of the software in this model?

  Hello. See here for a list of Dell of the models that work with 8 and 8.1. Dell recommends not installing 8.1 on the Latitude E6420 model. Dell said 8 is correct but does not provide an audio driver IDT even for 8. I don't think that there will be provided by any Dell IDT audio driver for 8.1 since it is not recommended to install. This means that you must use the native audio driver supplied with Windows. The native driver is generic and you can usually get audio to work when using it but not all functions are working properly. All I can suggest is to find the generic audio driver in Device Manager (I don't know how it is in the list) and try to 'update' by allowing Windows to search for an update on the internet.

  Maybe someone at our Windows 8 jury can suggest an audio driver IDT, you can try to use. If you post here tell them that you already posted on the Audio card to the laptop so that they will not move your message here.

• Temperature of the GPU 103C on Latitude E6420

  Hi, I recently started the Test PassMark Burn-In version 7 on my i7-2630QM Latitude E6420 with Nvida NVS 4200 M 512 M card. During the test, I noticed that the temperature of the GPU is about 103C and software reported "Test failure" due to the high temperature.

  The temperature of the CPU is also high, around 93 C.

  Is this normal? I would return this laptop?

  Thank you

  It is a known problem with the E6420 14 "laptop and the Quad core CPU. I have an E6420 and E6520. The E6520 manages the heat much better and higher out of GPU and 95 c 85 CPU when you run Diablo 3 for an hour on the resolution max and max graphics settings.   My laptop comes with the heatpipe heatsink only, he would downclock the CPU because of excessive heat and same judgment. After I got the radiator double pipe with a new thermal pad, my time is up to 100 ° C max on CPU and GPU and cell phone stops is more due to overheating.

  The problem is Dell packed plenty of power in a computer 14 "laptop. When running at load max, the cooling system can not just keep it up. Dell should really fix this, but you can do some improvements on your end. FYI - don't try if you are not comfortable to do this or are tech / mechanical savvy.

  Here's what I recommend:

  1 make sure you have the latest version of the BIOS installed. Dell changed the thermal curves for the fan of the bios updates.

  2 make sure you have the radiator HEATPIPE DUAL DELL P/N - TYP01. My E6420 comes with heatsink tube bad in the photo below.

  One pipe radiator - ONLY for the DUAL CORE i5, i7. NOT FOR i7 QM QUAD CORES.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-83.html

  There is a "gap" between the radiator and the Nvidia NVS 4200 M GPU. Dell uses a NOTE from the ADMIN: profanity removed according to the TOU > heat transfer heat pad. many users have done the following to reduce even lower time by replacing the thermal pad with a wedge of copper sandwiched between two layers of thermal paste / compound. I don't know that Dell probably does not support below this mod even if users have reported the lowest time after the mod which stresses in turn of components less.

  3 order the copper shim kit. www.eBay.com/.../260718120394

  4. use a good thermal paste / made up for example ceramics 2: www.newegg.com/.../Product.aspx

  Finally - browse the forums on this site because there is a lot of information on your E6420.

  Forum.NotebookReview.com/.../564579-E6420-Owners-thread-95.html

  E6420

  I7-2760QM turbo up to 3.5 ghz

  16GB DDR3 @1600 MHZ - Yes the E6420 and E6520 will accept 16 GB and run at 1600 MHZ if you buy 1600 Mhz Ram AND have a Quad core CPU RAM supports 1600 Mhz in native mode. You can search your cpu here and look under 'types of memory' for the speeds supported. "The memory of max size" for memory max your CPU is compatible.

  ark.intel.com/.../Intel-Core-i7-2760QM-Processor-(6M-Cache-2_40-GHz)

  500 GB HARD DRIVE AT 7200 RPM

  1600 x 900 HD display webcam w

  Keyboard backlight

  Intel 6250 WiFi

• Portege R830, Win7 64 - Fingerprint Software update fails at startup

  After the Fingerprint software version 2.0.06409 update as recommended by Toshiba TEMPRO, a system message appears to stop and start: "TFPU LogonUI.exe Entry Point not found. The entry point of procedure... not found in the TFPUCommand.dll dynamic link library.

  The system cannot use connection of fingerprints. After logging in using the name and password of a standard user, the software itself runs correctly, by contacting the fingerprint sensor.

  Worked fine just before update.

  Hello

  Have you tried to reinstall this software of fingerprint?

  Firstly uninstall the fingerprint tool preinstalled.
  Clean the registry (for example, by using a 3rd party software CCleaner) and restart the laptop.
  Download the utility of fingerprinting of driver Toshiba UE page and install the software.
  Reboot the laptop once more and test functionality.

• TrueSuite Fingerprint Software me lock out of my files!

  Help!

  I use the TrueSuite Access Manager very happy five months for some of my files important protect from prying eyes. Suddenly, today, when I try to "unprotect" them, I get a message saying "Invalid"File Protection Key"". The fingerprint reader works fine and TrueSuite Access Manager accepts my footprint quite happy.

  I am using Windows XP Pro. The only things that have happened since I last accessed files successfully was a download Microsoft Tuesday last week and my Norton Internet Security 2008 installation.

  I really hope you guys can help ' cos I need to access these files.

  Steve

  PS, I tried to restore to a previous system restore point, but they all fail...

  Well, here is where I have to this day...

  The TrueSuite Access Manager is provided by AuthenTec, but is actually just a rebadged version of the Password of ABIG software. The site Web of TrueSuite disappeared off the internet (although you can find one or two references to the fact that there were once). AuthenTec or ABIG offer any support whatsoever. So the only source of help is Toshiba...

  I traced the beginning of my woes to an application error logged in the log of the events of Win XP - fingerprint software didn't. The description of the error says only: "prints notifier Application digital Suite has encountered a problem and needs to close." Large. The application error has somehow broken the link between fingerprints recorded and the key used to 'protect' all my files. Even having a back-up fingerprints was useless, because that was the link between the fingerprint identification system and the file system of Windows that was broken, not fingerprint information...

  I rang the Toshiba help line, who recommended to download and install the latest drivers. What I've done. It made no difference.

  I managed to roll back to Windows to a date earlier than the application error (the problem I had before which prevented me to restore the system to an earlier date was caused by Norton internet Security, a "known" feature). But even once it made no difference.

  So where am I today? TrueSuite has lost the connection between my fingerprints and the key that he used with the file system Windows to protect my files, I was in turn locked out of all files. I can't access, copy, move them or delete them, BACK or Win XP. Toshiba recommendation is to use the provided with the laptop recovery disks and to reinstall Windows XP from scratch. Of course this will not return me my information, but at least it will remove all unnecessary files and free up the space occupied by them!

  Lessons to be learned - if you use TrueSuite to protect your files, think twice. If you want to continue to do so, back up all your files before protecting them. Of course, the backup version of the file will not be protected fingerprint (bat rather the object of the exercise, is not...)

  Good luck.

• Tecra M5 - Fingerprint software does not recognize the drive

  I have instaled new Windows 7 32 bit on my Tecra M5 - 12Z and I installed devices drivers provided by Toshiba. All devices were recognized even properly fingerprint reader, but the fingerprint software (Protector Suite QL) says that can't find the fingerprint reader.
  I tried with the driver for Windows Vista with the same result.

  What can I do? Thank you

  Hello

  I m not a Tecra owner, but you should try to reinstall the finger printer reader driver and software. It s worth a try! ;)

  Also check that the latest version of the BIOS is installed. You can download it on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  Good luck! :)

• Need to Fingerprint software for x 32 windows Satellite A200

  I installed Windows 7 x 86 on my Satellite A200 (PSAE6), and I do not have driver for Fingerprint Software.
  It s available for x 32 install but don t work

  Please help me find Fingerprint Software for fingerprint sensor.

  Post edited by: Mikizla-nk

  > It s available for x 32, but not for x 86.
  ?:|
  Do you use 32 or 64 bit OS?

• How can I disable "Fingerprint Software" for only for the programs?

  Hello

  somehow, the 'Fingerprint Software' require the user to slide a finger at any time it open programs that require the user to insert "user and password."
  How can I disable it permanently just for the program, not to open a session?

  Thank you.

  Hello

  In the TrueSuite Access Manager, you can configure some settings.
  In the administrator settings, you will find two tabs; General and advanced.
  On the Advanced tab, simply uncheck the option called: change logon Windows fingerprint logon password.

  I think that should do the job.

• Real Suite Access Manager Fingerprint software

  I have true Suite Access Manager Fingerprint Software on my toshiba satellite M300, the password Bank feature has stopped working properly, first when I just type in the login information and password for websites, etc he'd jump upward with the dialog password Bank registration information as it should. Now, he has stopped that. Is there another way to use this function or operate properly again? I am running windows vista.

  I agree with Akuma.
  Try to install the latest version of the Toshiba download page. Maybe this will help.

  Please send comments.

• Portege R500: Fingerprint Software and VIsta SP1 problems

  I encounter another problem which seems to be related to the fingerprint software. If I install the software, no issue arises. Once I register the fingerprints, the system slows down. Same clang of the other computers in the domain, in that I am, the response slows down gradually and then fails several times, before becoming inaccessible.

  Then as Exlopre crashes after a while. If I can stop the command, it hangs at the screen bright blue vista saying "logout". Then, the only way to turn off the computer is by holding down the power button.

  I log back in again once, unregister the fingerprint and all works well.
  Any idea? Thank you

  P.S. The software and drivers Vista SP1 and Toshiba are fully patched/updated

  Hello

  I am interested in your question, you are connected to a domain and use the fingerprint software in the network?

  Well, how it works in the Working Group?
  Have you noticed the same slowdowns system using laptop computer not connected to the network?

  Please check this because I guess that there is local connection between domain parameters (server) and your stored settings on the R500.

• Portege R500 - I lose settings in the fingerprint software

  Hello

  I use the fingerprint software, but sometimes, I lost my settings and database password and user fingers are clear. I have to import a few tweaks and then works fine. I lost my settings for 2 or 3 times in the week!

  You have an idea? Thank you

  Have you tried updating the software of fingerprint?
  To my knowledge, there is a newer version available
  See European driver of Toshiba and download and update software.

  One question; Do you use cleaning software? I mean software that remove the temporally files, form entries
  This software could clean up and delete entries from your

• Portege Z30: Fingerprint software no longer work after Win 7 32-bit downgrade

  Hi, I need a little more help with my Z30.

  Have just downgraded to Win 7 Pro 64 Bit to Win Pro 32 Bit.

  Everything seems to work except for the utility of fingerprinting.

  My laptop has biometric device of validity and it shows up as working in the Device Manager.

  I have install then it appropriate Toshiba Fingerprint Software listed as fp - sw - 20140811102806.zip.
  The installation seems to go smoothly.

  However, if I run the software I get an icon on the taskbar, but nothing else. By clicking on this icon (or going back to the program via the start menu) and no registration window opens. Basically, nothing happens.

  If I try and close the window in the bar of tasks, nothing happens. I have to use ctrl-alt-delete to close the icon and stop the running program.

  I ve started to change the settings and made sure that the biometric device is enabled and checked the box to allow users to log on to Windows using their fingerprints.

  I ve uninstalled Validity Sensor and allowed to reinstall.

  I uninstalled and reinstalled Toshiba Fingerprint Software. No luck.

  I think that I m doing something pretty obvious, but need some help on this.

  Anyone got any suggestions?

  Maybe you need to reinstall the software in the correct order.
  Try this order of installation:

  SP3 in Windows 7
  Infineon TPM professional package
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel AMT software
  Intel driver
  NVIDIA display driver
  Intel Rapid Storage Technology driver
  Technology of quick start Software Intel
  Realtek Audio Driver
  Intel LAN driver
  Intel USB3.0 driver
  Realtek card reader
  Intel Wireless LAN driver
  Driver Bluetooth filter Intel
  Intel Proset
  Bluetooth Stack for Windows by Toshiba
  ALPS Pointing Device Driver
  TOSHIBA fingerprint utility
  O2Micro smart card reader driver
  Smart Connection Intel (r) technology
  TOSHIBA value added package 1
  Intel Wireless Display
  Intel NFC Software Kit
  His Studio in DTS
  Registry Patch files

• Satellite A300-M01 - Questions about fingerprint software

  Probably a stupid question, but however.
  I realize the TrueSuite Access Manager Fingerprint Software is probably OEM, but.

  I want to do a clean install of Vista Ultimate (I get it for free at my University), with seven Beta and other Fedora/Ubuntu/Debian installation. I want to clean it Vista install to get rid of the nonsense bundle software etc etc that comes and loads up on startup with Vista but I do quite like the features that the fingerprint reader offers to me and realize that a facility would own it.

  From which it follows that I would like to know if it would be possible for me to acquire new software from somewhere, or recover from the current installation before you do a format and reinstall (or any other software free license which would provide features to my fingerprint reader, by the way).

  And then on a note side, is there anywhere where I can get the Toshiba Bluetooth / Networking Suite (which shouldn't be an OEM thing)? It would be very useful if the blown thing comes with a CD with at least all the things that are not on the OEM licenses and drivers for all the hardware, I would have thought it's too ask that everybody wants unnecessary bits 100 software from the start, but also limited time - watch 3 third-party software installed on their computer slowing them down , occupying their resources and wasting space (I know right? It's bloody hard to believe).

  The drivers and the software Toshiba will install in a generic version of Windows after you have installed the Toshiba Value added Package.

  You can download TruSuite and other software on the Toshiba site in the Support/drivers section. You can also save C:\TOSAPINS installation files

  If you do not want the additional software installed, why don't you just to uninstall and then run a registry cleaner like CCleaner?