Latitude E6530 with Intel HD 4000 + E-Port Plus APR + external monitor 4K

Similar Questions

• Windows Update runs continuously after the installation/purchase program for Dell Latitude E6530 with Windows 7 Pro 64-bit

  Hello

  I bought a Dell Latitude E6530 'renovated', that was the end of the lease. (It was not defective). I started up and installed Dell help. I have had no trouble to do a few minor update of drivers. However, when I try to update Windows it just runs and.

  I checked the Windows Update with the troubleshooting Diagnostic Utility. I made sure that there is no infection or rootkits on your computer. I followed several suggestions I found the title of Microsoft Support positions and renamed the folder of Distribution system, as well as a few things of the reset. I have register/authenticate online with Microsoft Windows software.

  When I run the troubleshooter, it says registration for the Service is missing or damaged, and he said it suits him, but he can't solve "problems installation of recent updates. However, when I run it again, it is said that he correct once again.

  Any suggestions?

  Melissa

  Check this thread - it helped a lot of us:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  Kimmo

• OpenCL with Intel HD 4000 and Premiere Pro

  Is it possible to enable rendering OpenCL for graphics Intel HD 4000 in Premiere Pro CS6? I am very disappointed that it does not work. Premiere Pro does not support the technology Intel QuickSync, which allows a rendering faster than even high-end equipped CUDA cards, so if at least OpenCL rendered could be activated, I would really appreciate it.

  N °

  Technology Intel QuickSync, which allows rendering faster than graphics cards top of same range equipped CUDA

  Based on the information? Intel marketing hype or you can prove with hard data?

• Tecra A9 and express port replicator - two external monitors

  Hello

  I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

  Is this possible?

  See you soon

  Ash.

  As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.

• Problem with Latitude E7440, dock E-series & external monitors

  Hello

  I just upgraded to a to an E7440 E6410. I have two Dell 2007FP monitors connected via DVI on a docking station E-series E-Port Plus. These monitors native resolution is 1600 x 1200 @ 60 Hz and my old E6410 was able to run this very well. The new E7440 refuses however to note that 1600 x 1200 is available and that there is an upper limit of 1280 x 1024 @ 60 and 75 Hz. The Intel graphics properties app shows 1600 x 1200 @ 60 Hz is a mode of the monitor support in the Information Center section, but it won't let me select it in the Display Options section.

  Anyone know if it is a fundamental limitation of the docking on the new connector 7000 series or if I just have something wrong set somewhere? All the drivers are up to date for what is the Dell support site is... The computer is running Windows 7 64 bit if that makes a difference.

  Thanks & best regards,

  Martin

  Sorry - should have come back earlier than my IT guy at work found the "fix." There is a updated driver that is for the E7440 but doesn't show up if you are looking for updates of E7440 (?). In any case, I had the drivers are required to:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/latitude-E5540-laptop?driverId=PTPX3&osCode=W764&FILEID=3292828809&LanguageCode=en&CategoryID=VI

  While the link is E5540 area, the driver is for the GPU Intel HD4400 located in the E7440 as well. This has fixed the problem on all the E7440s that we have here.

  Martin

• Two external monitors digital + Intel HD3000 minidock?

  Someone knows it if you use a series of Minidock 3 with a T420s (or other machine equipped on-board GPU Intel HD3000), can you run 2 x external monitors (for example 2 x 1600 x 1200) with digital interfaces?

  2 x DVI

  1 x Displayport / 1 x DVI

  It seems that this is the case, but I need to confirm. I do want to get a VGA.

  https://forums.Lenovo.com/T5/displays-options-and-accessories/Port-Replicator-series-3-vs-series-3-D...

  http://Web.archive.org/Web/20130509125152/http: / / support.lenovo.com/en_US/detail.page?LegacyDocID=MI...

  In addition, the citation to the PSREF (Tabuk expedition)

  

• Precision 7510 outputs to a single monitor through E-Port Plus Advanced Port Replicator

  Someone had problems with accuracy 7510 output only via an exit DisplayPort on the E-Port Plus Replicator of Advanced Port?

  Our Organization has recently begun to introduce units of precision 7510 to our employees, and we see that they only will be one monitor connected via DisplayPort through the Advanced E-Port Plus Replicator of Port - even if there are two monitors connected on both outputs DisplayPort on the E-Port Plus the Apr. If the monitors are connected via DVI, 7510 accuracy is able to output to both of them through the E-Port Plus the Apr.

  We tried M4800, E7450 processor and controller Latitude and Latitude E7470 precision devices in these E-Port Plus with two monitors connected on both outputs DisplayPort - and they all work properly.

  7510 precision units have video cards NVIDIA Quadro M1000M and the E-Port Plus APR is connected to either a pair of monitors P2417 or a pair of U2414 monitors.

  Disable Switchable Graphics in the BIOS. This should solve your problem.

• How to use two external monitors with my laptop?

  I have a new Pavilion dm4-301 d cl Entertainment PC.   My OS is Windows 7.   I'm used to using two external monitors with a docking station.   This new laptop lacks a docking station.  What should I do use two external monitors?

  Certainly not without a dock, but even with laptop HP well enough docks limit you to one of the ports on the external monitor, even if there are two on the dock. We used a device called an Atlona AT-HDPIX2 which is a USB to hdmi adapter. It provides a feature of third monitor for a laptop... use the native external port of the screen and the computer screen internal, then this device gives a third control that is fully configurable to display Windows 7 interface... clone, extend, etc.. It allows a full HD resolution and is pretty responsive for games even light.  HP does not have any true docking station for your laptop.

• Latitude E6430 - failure after update of 5200 M Intel HD 4000 NVS and nVidida drivers

  At work, I have a laptop Latitude E6430 with Win7 Pro 64 bit. I lived a few problems when you try to connect the PC to a TV via HDMI. So I tried to update the video drivers from the Dell website. If I remember correctly, I first installed the Intel HD 4000 driver, but I chose the 32-bit driver mistakenly. A pop up during installation process said that the pilot was incorrect, and I found the good 64 bit - driver and installed it. Then I installed the driver of 5200 M 64 bit NVS.

  The PC was working fine after the reboot. But the next time I start the PC, I got a blue screen and was forced to do a windows system restore. I tried to reinstall the drivers, but the result was the same when the PC restarted. After several restorations system I got to a point where no where left in the Device Manager, only the generic Windows VGA driver Intel or nVidia-drivers. If I try to install the Intel driver that he told me that the system violates the basic requirements to install, the alias does not appear to be the graphics card. If I try the nVidia installation driver goes OK, but Windows hangs after reboot.

  The it Department now did a new install of Win7 (but not yet installed all Dell drivers in the order listed). They tried installing the Intel driver but got the same pop up like me. They say they have managed to install the driver of nVidida without problem (at least for the next reboot...).

  What is the problem and what is the solution?

  Hello

  You ask to go to the BIOS (F2 on startup) screen, move to the video tab, select Optimus and check the option enable the optimus. This should help. You can also view the photo for more information below:

  

• Desktop 700xt HP Envy with intel i7 - processor image 4770 has a DVI connector port

  I bought a HP Envy with Intel i7 - processor image 4770 700xt and Windows 8.1.  I would like to know if this computer has a DVI connection charging port.

  Assuming that your 700xt want model has a back panel that looks like the one below, it has a VGA output (analogue only) and a DVI - D output (digital only);

  

  #4-VGA (analog only) 5 - DVI - D (digital only)

• 3rd generation Intel® Core™ processors with Intel® HD Graphics 4000 questions

  Dear HP sorry for my bad English, I have a problem on my laptop
  When I played or open some game or apps there make my always 100% CPU usage, which is happen, maybe because I do not want to install the latest (3rd Generation processors Intel® Core™ with Intel® HD Graphics 4000). I get a lot of lag when played a game... but my friend with the same machine than ever
  I am looking for my problem on google, but the result is empty

  My problem:

  -CPU usage * always 100% when I opened a few apps or game

  -J' do need a link to download the latest 3rd generation processors Intel Core™ with Intel® HD Graphics 4000 *.

  -If the HP have software (support for customers) like sony (vaio care). *

  I thank you very much for the reply and sorry for the bad fate

  Hi DAli99GRT,

  Thank you for your request, I will do my best to help you!

  I understand that you have a problem with the performance of your laptop. When you play certain games the CPU usage is 100%.  Looking for updates to your system.

  You can run The HP Support Assistant to help with HP updates for your laptop.

  You can also manually check from the HP drivers & downloads and captures your exact model by following the instructions.

  How can I find my model number or product number?

  Here are the documents that may be helpful. I do not know what operating system you're running, while I have provided two.

  Improving the performance of the system without adding memory (Windows 8)

  Improving the performance of the system without adding memory (Windows 7)

  If you need more assistance, can you give us your exact model and the operating system you are using.

  Results or clarification would be useful.

• Cannot send/receive at full speed with Intel dual port 10 GIG 82599 ethernet in guest on ESXi 5.5 OS

  Me to consider whether or not it is possible to send/receive to 20 Gbps throughput with Intel 82599 dual port card within a guest VM on ESXi. I use to send and receive traffic PF_RING DNA of ntop. I have configured the dual-port card Direct IO mode to allow the guest VM have a direct access to the card. For the traffic generator, I use a metal machine naked with another dual port ethernet to generate traffic. The generator of nu metal machine and ESXi have their double ethernet port directly connected via SPF + cables.

  In the first experiment, the traffic generator generates 10 Gbps of traffic on port 1. The guest VM is able to capture packets at full speed without any loss of package even for 64 byte packets, which translates into 14mil PPS. I had then invited VM pass to 10 Gbps for the traffic generator, which currently receives. However, guest VM was able to generate about 7 Gbps of traffic regardless of package size. The CPU seems to be fine at around only 20% of load. I do not understand why the VM can receive at full speed but could not pass to the line rate.

  In the second experiment, the traffic generator generates 20 Gbps of traffic on ports 2. The guest VM unfortunately can only capture at the rate of 5 to 6 Gbps per port for a total of 10-12 Gbit / s. I have the receiving process listens on each port on a different processor. Then, I got VM generate 10 Gbit/s on each port. Unfortunately, could not reach 5 to 6 Gbps per port, regardless of package size.

  The naked metal machine is only an AMD 2.2 ghz machine low range to four hearts. It can send full line ate 10 Gbps for gpbs port 1 and 20 for 2 ports. The ESXi server is actually a much beefier machine with the quad core Intel Xeon 3.2 Ghz. There is a lot of memory and CPU on ESXi machine.

  5.5 runs the ESXi server. I have 1 comments running virtual machine running experience.

  I'm quite puzzled why there is no bottleneck even in Direct IO mode. Both CPU memory seem to be good. I wonder if there is any setting that I need to be playing with in ESXi. I appreciate all help. Thanks in advance.

  It turned out that I placed the network card in the pci slot 3 which is only x 4 routing. I moved it to 1 (x 8) slot. Now, I get full 20 GIG.

• Cannot send/receive at full speed with Intel dual port 10 GIG ethernet in ESXi 5.5 82599

  Me to consider whether or not it is possible to send/receive to 20 Gbps throughput with Intel 82599 dual port card within a guest VM on ESXi. I use to send and receive traffic PF_RING DNA of ntop. I have configured the dual-port card Direct IO mode to allow the guest VM have a direct access to the card. For the traffic generator, I use a metal machine naked with another dual port ethernet to generate traffic. The generator of nu metal machine and ESXi have their double ethernet port directly connected via SPF + cables.

  In the first experiment, the traffic generator generates 10 Gbps of traffic on port 1. The guest VM is able to capture packets at full speed without any loss of package even for 64 byte packets, which translates into 14mil PPS. I had then invited VM pass to 10 Gbps for the traffic generator, which currently receives. However, guest VM was able to generate about 7 Gbps of traffic regardless of package size. The CPU seems to be fine at around only 20% of load. I do not understand why the VM can receive at full speed but could not pass to the line rate.

  In the second experiment, the traffic generator generates 20 Gbps of traffic on ports 2. The guest VM unfortunately can only capture at the rate of 5 to 6 Gbps per port for a total of 10-12 Gbit / s. I have the receiving process listens on each port on a different processor. Then, I got VM generate 10 Gbit/s on each port. Unfortunately, could not reach 5 to 6 Gbps per port, regardless of package size.

  The naked metal machine is only an AMD 2.2 ghz machine low range to four hearts. It can send full line ate 10 Gbps for gpbs port 1 and 20 for 2 ports. The ESXi server is actually a much beefier machine with the quad core Intel Xeon 3.2 Ghz. There is a lot of memory and CPU on ESXi machine.

  5.5 runs the ESXi server. I have 1 comments running virtual machine running experience.

  I'm quite puzzled why there is no bottleneck even in Direct IO mode. Both CPU memory seem to be good. I wonder if there is any setting that I need to be playing with in ESXi. I appreciate all help. Thanks in advance.

  It turned out that I placed the network card in the pci slot 3 which is only x 4 routing. I moved it to 1 (x 8) slot. Now, I get full 20 GIG.

• Problems of latitude E6530 USB 3.0 Windows 8

  Hello

  The left USB 3.0 on my Latitude E6530 does not work when I connect a USB 3.0 device to it. If I plug in a USB 3.0 in device after Windows starts, it does not recognize anything connected to this port. If I connect a USB 3.0 device to the front port to turn the system, Windows will recognize the device once it starts (it will mount an external hard drive, for example), but will immediately report there is error when loading it. This port usually does not recognize devices USB 2.0 without any problems.

  USB ports are working fine. I can connect USB 3.0 devices in the USB 3.0 port right, and they work. I can plug in devices USB 3.0 to one of the USB 2.0 ports, and they function as devices USB 2.0, as expected.

  I am running Windows 8 Pro.

  It's probably a driver issue or a hardware issue?

  Thank you.

  I have the e6530 of Latitude with the docking station and NONE of my USB 3.0 ports act as 3.0.

  But I'm happy to say that it is corrected now! :)

  I had later "Intel USB 3.0 eXtensible Host Controller Driver" is downloaded from the Dell site and Device Manager reports no problem - but every time I have pluged a USB 3.0 device in any of my "SS" USB 3.0 ports I am greeted with the message "this device could accomplish a lot faster..." "in my systray.  :(

  I downloaded USBTreeView (freeware) and when I connect a device, according to me, it connects to a USB 2.0 hub port.  No 3.0 ports under my "Intel USB 3.0 eXtensible Host Controller Driver" were already used.  :(

  But this thread solved my problem. The problem is the last "Intel USB 3.0 eXtensible Host Controller Driver" driver on the Dell site is almost a year older than the latest in Intel.  Thank you JeanPier - your message has reported me here:
  en.Community.Dell.com/.../20503380

  .. which brings me here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129

  Download the latest version of the host controller, Intel, install it (unzip & run setup.exe), reboot and your problems will be solved...!

  See you soon!