Lenovo Bluetooth Laser Mouse N6901 Double/single clique are random with U400

Similar Questions

• ThinkPad Bluetooth Laser Mouse buttons stop working

  My ThinkPad Bluetooth Laser Mouse is a great device, except that very often the buttons stop working; for example, I can click the close X at the top right of a window and nothing happens. I found that cross all possible button clicks, including failover of the scroll wheel, will get running again. My assessment is that the software Lenovo mouse Suite merges very often on the State of the mouse buttons; for example, software problem, not a hardware problem. Frequency is approximately 1 event in 20 hours of use. What must I do to get help?

  Windows 7 x 64 with all updates

  ThinkPad X 220 with built-in Bluetooth

  Mouse Suite Lenovo: 6.47 (upgrade to 6,48)

  UPDATE: just had to happen once again (still ongoing: 6,47). I tried a lot of things with the mouse and the only thing that solved the problem was to tilt the mouse wheel (first to the left then to the right).

  UPDATE: I recently had the left and right tilt scroll wheel assigned to respectively backward and forward, and I don't remember having this problem before I did these assignments, so I changed both of these assignments to disabled to see if that makes a difference. I've also updated the Mouse Suite version 6.48 software.

  

  For further investigation:

  100% reproducible failure

  When I opened Firefox 11.0 with only one tab, the window control icons (Minimize, Maximize, Close) would correctly highlight on mouseover and works correctly when you click on it. When I then open or switch to another tab, there was no highlight on mouseover and is no longer, they responded to clicks. Other actions of the mouse work properly, including the icons of window control in other apps I tested.

  I uninstalled then reinstalled Firefox 11.0, define a new profile is empty, and the problem persisted. I checked for other reports of this problem in Firefox, and while I found a (very) few similar reports, I found that there was no evidence a general problem in Firefox.

  Successful correction

  I uninstalled ThinkPad Bluetooth Laser Mouse, mouse, Lenovo, ThinkPad UltraNav Utility, ThinkPad UltraNav Driver and rebooted, installed just the TrackPoint with the Microsoft Compatible PS/2 driver, and the problem does not recur. I think only installed two UltraNav packages with system update, then the Lenovo ThinkPad Bluetooth Laser Mouse with mouse Suite, and the problem still does not happen. It continues to operate correctly.

  My assessment

  My assessment is that something subtle had screwed up in Lenovo UltraNav and/or mouse Suite, which has been fixed by uninstalling and then reinstalling everything. I don't think that there is a problem in Firefox.

• x 220 Tablet thinkpad & thinkpad bluetooth laser mouse

  I recently got a thinkpad x 220 Tablet and I ordered a thinkpad bluetooth laser mouse with it. the mouse came with an installation cd but my Tablet isn't a cd inside player. Ive looked online for the mouse drivers, but were unsuccessful. for any help or suggestion would be greatly appreciated.

  TRY THIS ONE http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67201

• interference? 2 thinkpad bluetooth laser mouse 2 thinkpads

  Hello

  my girlfriend has the thinkpad bluetooth laser mouse and she likes it

  I also want to find the mouse, but was enthralled will it be interfernce when we work side by side?

  We have thinkpads and all have two mouse BT

  each mouse will be Calera on one device at a time, so there should not be problems.

  just don't confuse your mouse as you order the other cursor.

• My Bluetooth laser Mouse 5000 does not work correctly.

  Original title: Laser Bluetooth Mouse 5000

  I have a Microsoft Bluetooth Notebook Mouse 5000 that has worked, but no longer works.  Read everything here makes me think that he must be a genius to get the updated drivers.  I thought it was 'plug and play' not what I expect from Microsoft at all.

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

• Driver Microsoft Bluetooth Laser mouse

  Equipped with Vista... Mouse not recognized Bluetooth... It is a Microsoft 5000 bluetooth mouse...

  Hi howardcbradley,

  ·         Since when are you facing this problem?

  ·         The Bluetooth mouse was working fine before?

  ·         Remember to make changes?

  Check to see if the following is useful.

  Method 1: Follow the steps in this Knowledge Base article to check the issue.

  Troubleshoot failures in detecting new Bluetooth mouse or keyboard

  Method 2: You can also check:

  The problems with Bluetooth devices

• Problems using Bluetooth Lenovo Laser Mouse with Helix

  I'm from the Lenovo Bluetooth Laser Mouse to use with my Helix. Works well except that from time to time it just stops working and becomes completely insensitive. I can get it going again by going to settings > change PC settings > devices disconnected from the list of connected devices, then using 'add a device' to add back to new.

  Anyone else having this problem and has found a way to fix it? It's a bit annoying to have to keep doing this from time to time.

  I have the mouse Apple Magic Mouse (BlueTooth) and had the same problems.

  To fix this I had to disable the driver from beeing allowed to go in hybernation.

  Go to the device, under BlueTooth Manager choose ThinkPad Bluetooth 4.0.

  In properties under powermanagement delete "Allow the computer to turn off this device..."

  See if that helps.

• Microsoft Bluetooth Notebook Mouse 5000 appears as mouse HID-complaint only, and does not appear in Intellipoint correctly

  I just installed the mouse on my laptop Dell D820 running Windows 7 Ultimate (all the fullyy patched)

  The mouse is recognized by the system and displayed both Bluetooth devices and devices windows with the correct name: Microsoft Bluetooth Notebook Mouse 5000.  It works also.

  However when I open Microsoft Mouse and go to the tab buttons, it is reported no. Microsoft USB mouse detected which means that I can not configure the buttons, etc.

  And when I go to the Hardware tab reports the mouse as a mouse HID-complaint that is so, it also appears in Device Manager.

  So far I have tried:

  • Remove the mouse, and then reinstall (in a number of different ways).  When he returned, he is reported as 'unidentified device' and the device driver indicates a driver installation failed
  • Uninstalling and reinstalling Intellipoint - latest version downloaded and installed to sweat
  • The mouse of uninstall, reboot and reinstall the mouse

  All very irritating.   Any suggestions to get the system fully recognize the mouse, please

  See http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=099&active_tab=systemRequirements.

  IntelliPoint is not necessary and does not support the Bluetooth Notebook Mouse 5000. The buttons are not configurable.

  There are some other Bluetooth Microsoft mouse which are supported by IntelliPoint, and the buttons can be configured.
  See http://www.microsoft.com/hardware/mouseandkeyboard/ProductList.aspx?type=Mouse&techId=Bluetooth

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye

• Microsoft Bluetooth Wireless Laser Mouse works, extremely, annoyingly slow after change of motherboard out sometimes.

  I have problems with my motherboards.  I installed originally a jury of six core AMD Asus but discovered that the sound circuit on the Board picked up the RF of six hearts.  So I changed it to a Biostar TA890FXE an AM3 Board with 4 PCIE slots.

  This map may contain 4 Pcie, but has only 2 16 x slots that are white in color for Crossfire.  The other 2 Pcie are for the slower cards.  I have my card installed in slot 1 PCIe 16 x

  Since I was a boxed version of Vista Ultimate 64 bit the replacement of the Board of Directors has gone well with without a hitch, except for this problem.  The darn wireless mouse keeps presenting a significant delay from time to time.

  I upgraded to the latest BIOS and also found that a USB Joystick was also causing problems until I uninstalled the ATI Radeon drivers several times.  I have uninstalled/reinstalled all drivers USB again and again.   I even upgraded from 8 GB to 16 GB of ram Corsair and the thing does not run any faster (except for loading video in an editor) than my Asus M4785M with 4 GB ram.

  At first, I figured the card Radeon 4650 diamond with 1 GB of ram, when I ran FSX I got frequent black screens between refreshes.   When the aircraft was in its window the mouse lag so I moved it into the box with the graphics.  I could move it very quickly from time to time but not always.  As soon as the mouse has crossed the border of the FSX menu in the aircraft selection menu, the LAG would begin.

  Strange however, I also have the Microsoft Bluetooth Entertainment 7000 keyboard and it has a built-in mouse pad.  So when I got the offset of the wireless mouse I found that the mouse pad, keyboard do not show it.  Of course, a lot of batteries have been tried.  I have also a key 3G modem and the thought that maybe the RF frequencies could interfere with the bluetooth transmitter, and yet the mouse KEYBOARD pad worked fine all the time!

  At a point of the USB ports on the front of my PC failed suddenly and I used the port in the back instead, as the 3 g modem suddenly was cut.  He started upward once again connected to the rear port, but he chose all of a sudden another 3G network, spend roaming, something that isn't supposed to

  occur.

  So it seems to be a USB problem.  I double checked the connectors on the front panel plugged into the motherboard header, but it was close.  I removed it and he exchanged with a rear slot spare USB cable I have no problems. I even swapped the transmitter Bluetooth of the rear USB ports in the front and vice versa, and these problems went away.

  Yet from time to time, there will be a sound of loading the disk heads and there will be a lag on the mouse and it flit on the screen itself.  I removed all the USB drivers and mouse drivers and drivers of keyboard without result, I then plugged a wired keyboard and mouse while the USB was plugged in and waited.  The wired keyboard had built in the trackball, so I couldn't move around as fast as Bluetooth, one mouse cursor and again, I got the mouse slows down from time to time.   Most of the time is when a noise was heard from the hard drive.   I turned off Superfetch to listen to the record and it made no difference.

  I left the PC running on its own after turning off any energy saving features and when I came back to it, I finally found that the keyboard was a lag now, too, I had to wait about 30 seconds for something to wake up until the keyboard is recognized.   It seems that it is the same problem that mouse, but at a later date.  I then re active features and screen saver and keyboard lag reduced significantly saving energy.

  Then, once, I got a huge amount of lag when Google open white paper screen, the mouse cursor wouldn't move at all for a long time or erratically.   In this case, I thought to 'pull' the wired keyboard and the trackball at the back of the card, and the problem immediately disappeared as if there were conflicts.

  However, this did not last long, and about an hour later, the mouse pointer lag appeared.  Don't forget this mouse worked fine for a year on an Asus card and withdraw it very well.

  My next attempt with the Bios, and it happened unexpectedly.  This motherboard has a utility to start Bios screen where I can put my own splash screen and no the Biostar on a difficult start.  So I did and all of a sudden all the problems cleared up!    It was as if something in the Bios was hung in, and then there is this whim of hard drive noise and once again, lag lag lag on my mouse.   With 16 GB of ram and 1 GB of video ram?  Just to not use the Aero's office, no sense at all to me.

  Tried to contact Biostar for 12 days now, no response.  Have the latest drivers for vista from windows for the keyboard of entertainment and mouse, service pack 2 for Vista and a 1 TB hard drive, 500 watt antec PSU, problem occurs with or without overclocking.

  Anyone?  Anyone?

  AMD Phenom 2 1090 t black edition 3.2Ghz

  HD4650 diamond! GB

  Corsair XMS3 DD3 x 4 1066 4 GB

  1 TB of Seagate SATA

  Antec 500W PSU Green

  Note: This map has a header of a CD rom, but also the DVD Sata PATA

  Latest

  I could no longer the transceiver Bluetooth 2.0 with the mouse and keyboard.  I went to a keyboard and a wired mouse again.   Then a few days later I decided that I would plug the transceiver Bluetooth 3.0.  This time it installed fine even if I had uninstalled the Intellipoint software.   I went then to the receiver Bluetooth 2.0 and it didn't work anymore.  I did a reboot between the two, and suddenly I saw a Microsoft update will appear at the bottom right of my screen.  I left it to update, and then he said that I could connect other bluetooth devices other than my keyboard of entertainment game.

  Well, this is not true at all, for the entertainment keyboard transceiver pairs automatically.    Yet, this message appeared.  When I went into the control panel to verify the situation once again, I found that there is no Bluetooth icon.   From what I've read on other Vista users using a transmitter of 3rd Bluetooth part, it seems that the Bluetooth stack has disappeared because I mixed the two Microsoft Bluetooth transceivers.    Something else occurred as well, it reminded me of moments where I would install a new installation of Win98 and some drivers as the main card drivers were not yet installed.  He will have to restart the system and over and over again for each driver be seen, and if we were out of sequence, should be made to remove and start over again until all have been installed.  In this case, it seems to be the same kind of priority when it comes to the way in which the Bluetooth drivers are installed.  When I removed the Bluetooth 2.0 transmitter/receiver and replaced by unity Bluetooth 3.0, I seem to have rid one of these priorities, let the program update that must have been stuck in the pile of pilots, how the keyboard and the mouse works perfectly now.

  With 3 wireless transmitter that is I can no longer use the Bluetooth 2.0, one all the more, I plugged it in different USB ports and we saw him, but it was not enough to cause any installer to appear.   It's as if they are reticulate together now, and I can no longer use the add a device feature.   Even if I add the second transmitter/receiver, it is simply ignored.

  Since then, right now I have no need of an additional feature and the keyboard works very well, I'll keep this configuration until I have to reinstall the motherboard still when I start then a clean Vista install.  Unfortunately the new motherboard that I received does not work as I had hoped it would be, not that it would affect the situation above, that's simply not what I was told it was, and I plan to return it the manufacturer once more.

• Bluetooth wireless mouse

  I recently bought a mouse came with a wireless dongle Bluetooth wireless.  I have Windows Vista SP2.  The dongle is installed properly (sometimes), but other times it seems do not install - in other words, when I remove the mini-usb stick and replace.  The mouse worked regularly, but it seems that when the computer sleeps and wakes - the "generic bluetooth radio" is reported in the device as Manager does not.

  Device displays the error "generic bluetooth radio" Manager 43 (Windows has stopped this device because it has reported problems).  The pilot is made by Cambridge Silicon Radio Ltd.  The device ID is VID_0A12 & pid_0001 & REV_1915.

  Another thing, I noticed too strange, is I also have a Microsoft Wired USB mouse I was using before this bluetooth installing mouse.  They seem to be related together somehow.  When the MS USB mouse is in place in the USB port, Bluetooth mouse seems to always work/install/unsleep.

  I am at a loss.  There is a patch from MS for this type of thing past with windows 7 - but not vista from what I can tell!

  Also, I used the Windows Event Viewer to determine the file it's the slightest error on East: BTHUSB. SYS.

  Hello

  Norton is known for this issue, so using their removal tool was a good shot. AVG
  is also known to have caused strange problems so I uninstall it and run the AVG
  Removal tool.

  AVG removal tool
  http://www.Avg.com/ww-en/download-tools

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ===============================

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps.

• hp bluetooth wireless mouse x4000b

  Bought this hp bluetooth wireless mouse x4000b at Best Buy in Fort Myers, Fl four months ago and has continued to use us with my laptop last week and there refuse to work.  Made sure it was lit.  The unit has been accepted by my laptop when I first bought and worked 100% until last week.  Just to double check, I replaced the battery but still dead.  Went into the control panel and was able to bring the wireless device.  Number of product HP H3T51AA hope you have any suggestions as to what we can do to make relive.

  I have dicided to uninstall the mouse wireless bluetooth hp.  Following the instructions that I installed it again without any problems.  This method enabled the mouse to pair with the laptop.   Windows 8.1 Hp 17.3 laptop.

• HP ENVY 17 Noteb: bluetooth microsoft mouse will not pair

  Unable to pair microsoft sculpt mouse touch (bluetooth)

  I tried everything I could find on the web.

  Tried the mouse with windows 8 OS and it works well

  Help, please.

  HP notebook product number: LW900AV #ABA

  Yes, it doesn't have bluetooth on Windows 7 OS

  I searched for months to solve the problem of matching with Sculpt Microsoft Touch Mouse (bluetooth) (no dongle) and found the following web page. In fact, a few months ago Microsoft support remote (for 2 hours) in my PC and could not get the mouse running (he had previously worked). The support of Microsoft Tech. concludes that the mouse was not compatible with Windows 7 OS, which I didn't agree or accept.

  I looked for a solution for months, without success until very recently.
  I found the following web page:

  http://www.SevenForums.com/hardware-devices/302889-Bluetooth-doesn ' t - search - devices.html

  The poster said:
  Quote:
  Go to the icon START and type services.msc and some services.

  The dialog box that opens has a long list of stuff, but search for BLUETOOTH SUPPORT SERVICE. Double

  Click here to open. Make sure that it is AUTOMATIC. Go to the LOG IN tab, select THIS ACCOUNT, and then type

  LOCAL SERVICE. Is a password list (a chain of 15 points). Remove the password in the

  PASSWORD and CONFIRM. Choose OK.

  It will ask you to restart the service. Once restarted, turn on again your bluetooth adapter. Put

  your mouse into pairing mode and add the mouse.
  Finally, if anyone out there knows why this weird procedure is necessary, please message me. Just curious

  End of quote

  I tried this suggestion and in gratitude, it worked! The wizard did not find the bluetooth mouse. It paired successfully and worked satisfactorily for the past 2 days... it is after Microsoft tech cannot fix the problem several months ago and I just dropped, until the renewal of my research solution recently.

• install Microsoft wireless laser mouse 6000

  Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
  I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.

  It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]