Lenovo G580 - Battery Charge stops at 60%

Lenovo g560. "60% of the battery is connected does not load. Win7 x 64. When you connect the charger blinks yellow and immediately becomes the white light. The battery does not work. Immediately.

Hi igorksm,

Welcome to the Lenovo Forums.

You can try the solution on this thread.

When you are finished, open the Lenovo energy management. Choose 'Maximum autonomy' and to observe.

- Link to photo

Concerning

Tags: Lenovo Notebooks

Similar Questions

  • Battery charge disable Lenovo Z500

    Hi all

    I recently got the Z500, working under Windows 8.

    I have a question about the battery charge. I'm working on the laptop for long periods of time with the power supply connected. Because it is bad for the battery, is it possible to disable the loading or maybe remove the battery?

    I looked in the manual and forums but I couldn't find something similar to this model.

    If someone knows what I could do?

    Thanks in advance.

    There is a setting in the management of the lenovo energy that limit the limit of battery charge 60% and there after stopping tilll the battery level drops to 55%. This is the battery protection mode (in some laptop that is optimize for the life of the battery or similar). It just open energy management and access the battery settings by clicking on the icon. Then select the mode and voila!

  • Y40 - 70 won't hold battery charge

    I plug, 100% load, unplug the unit. Bed 100% charged battery. About 15-20 minutes later, computer laptop stops suddenly with a dead battery. When I plug it back in and get it restarted, it shows the battery charge again, 0%.

    I'm on Windows 10, but this problem started a few weeks before proceeding with the update. Thanks for the help!

    In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

    Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

    The numbers for Y40-70/80 batteries are:

    Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

    Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

    Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

    To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

    Thank you

  • Lenovo G580 does not illuminate

    Hello

    I have a Lenovo G580 I've had one for a little while now. It worked OK on Saturday but I tried this morning but it won't turn. I tried a different PSU, and I have tried with and without the battery. When I plug in the charger the dough light comes on but when I press the power button / nothing happens. If I had to guess I would say that there is a problem with the button of power but just wondering if there is a known issue or if it may be something else.

    Your help is very appreciated.

    Thank you

    Good afternoon.

    For those that are interested I took it to a local company and the power button needed to be resoldered, its all working fine now.

    Thank you

  • U310 battery-charging taped to 60%

    Hi you all,.

    U310 - I5 - 4Gb - 32Gb SSD - 500 GB HD - upgrade to W7 premium W8 pro

    Today, unexpectedly and six months after the purchase, the power batteries is stuck on 60% after recharging and refuses to climb to higher values.
    So I tried to reset the battery meter (status system, "Energy management" bar), but when he finished the refreshing, it shows the same value, 60%.

    Is this the time that make the laptop for repair of Lenovo service?
    Or does anyone have another suggestion?

    Thanks in advance,
    Jim

    Hello
    There is a setting in the management of the lenovo energy that limit the limit of battery charge 60% and there after stopping tilll the battery level drops to 55%. This is the battery protection mode (in some laptop that is optimize for the life of the battery or similar). It just open energy management and access the battery settings by clicking on the icon.
    See if it helps

  • MS A30 - battery charging when I plug in the power cable

    Hello

    I'm having some problems with (I think) on my A30 power management utility. When I am running on battery power and I plug in the power cable, the battery continues to discharge even if the laptop 'knows' that it runs on the power grid (ie the utility says "current generator: alternating current.") "Online, discharges: 82%. Strangely, if I put the laptop in mode 'sleep', then resume, she goes back to normal (i.e. working on current alternative, the battery charges).

    It is true, I think that this began after I installed "PC Pitstop optimize Scan" www.pcpitstop.com (please, not conferences - I used a couple of their public services before and they were very good, so I thought it would be too much), so I guess it's some sort of configuration problem, but I have no idea where to go from here. I went through all the options on the power management utility, but they all look sensitive. Any ideas (other than do not install software stupid, doubtful)?

    Kenny

    Hi Kenny,

    I experienced this behavior on my A30 where the system says it works on current alternative, but still drains the battery and stops eventually.

    In my case the problem has proved to be a loose DC Jack that sometimes cuts off contact with the socket on the back of the laptop. This momentary loss of power DC seems to provoke the power management utility switch to battery power, even though the DC power is restored. The only way out of this situation is to Hibernate / restarting the laptop.

    I think that it is a problem with the power supply subsystem in the laptop that does not react properly when it encounters a momentary loss of DC. Then the Toshiba power management utility is no longer responds correctly and switches to the battery power.

    My only solution to this was to anchor the DC cable to the back of my A30 so that there is now no chance of the plug DC moving in its socket. This has proved to be very effective for my A30 and I've had no recurrence of the problem.

    HTH

  • Questions about the BIOS update and battery charge on Satellite M30 104

    Hey,.
    I try to update my BIOS, but it does not work because my battery won't charge any more, if a window always tells me that my battery is not enough. Yet, the reason why I'm updating my BIOS is that I read in a forum that might solve my problem of battery charging.
    I'm fairly certain that the battery is not the problem itself: I bought a new battery, it worked for 10 minutes once or twice, then again the load stop completely.
    If anyone knows what the problem is or how to update my BIOS, please...

    Hello Celia

    I am not a technician, but as far as I know, BIOS has nothing to do with charging the battery. In my opinion, there are some problems with e-procurement (electronic load). Sorry, but I imagine that you must contact the partner in your country.

    They have diagnostic tools and it can be verified. Please call and simply explain the situation.

    Good luck!

  • Second battery charge no more than 29% on Portege R200

    Hello

    I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

    I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

    Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

    Thank you much in advance.

    Hello

    Looks like a malfunction of the battery to the battery performance and life is limited
    After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

    I think that you should simply replace the battery with a new and check if it helps to solve your problem!

    See you soon

  • How to control the battery charge when you are connected to the power adapter?

    I post here because I want to know if there is any software option that I can use to control on my load while I use the charger and the dough.

    EXPLAIN

    You know in IBM ThinkPad there are some utilities can help you master the power to CUT the battery charge and keep on the power of the charger and the battery is always on standby if it is OFF the bettery then work and never lose anydata

    I want to control the load while I'm working with battery and charger at the same time.

    I hope that claire ;)

    Hello

    It of not possible to control the battery charge using any software.
    The battery will begin to charge if the adapter has been connected to the laptop and it will stop the charge process after the adapter has been disconnected or if the battery is full.

    See you soon

  • Good battery charge for laptop to HP 15-D014tu Intel i3 - 3110M

    Hi, I know that this subject has been discussed and there is a lot of information online about this but he simply left me confused.  My question is what is the correct way to the battery of my new book of charge/discharge.  I have load to 100% and then remove the charger and let run to 40 or 50% then reconnect it and then recharge to 100% or, say, 80% (as I read online?)  and here again, remove the charger and let it carry out 40 or 50%?  If this is the case, it seems that I do that all day long (out magazine & back).  Is it a good idea to leave the charger plugged?  I noticed (leaving the charger in) the computer 100% and there remains (said always fully charged 100%) - the old laptop I used would say 90 something % and not charging but this laptop does not seem to do this?  Any help is much appreciated, thank you.

    Hello

    New smart charger and smart battery will stop when 100% full. Battery has life, according to the number of cycles (and usage) of load. Sellers quote normally 300 cycles (that's why 1 year warranty). Several batteries will live more than 300 cycles, only to cut capacity. I did a full test for exactly two machines (Dell E4310). One was sitting on a docking station all day, every day, and the second which was not sitting on a docking station. After a year, those who stood on the docking station maintained power over the other. I'll find the results and display the numbers a day.

    Kind regards.

  • Battery charger external for 0c 52862 (T450s)?

    Is there something availible that would allow me to charge my battery of T450s (0c 52862) without being in the laptop?

    I found this same question in the accessories subforum, but without response. Maybe this area gets more traffic.

    Hello

    There are no external battery charger brand Lenovo for T450s and so on as the 40Y7625 one for the older generations of ThinkPads.

  • Battery charger gets hot

    Is it normal that my battery charger extremely hot when it is in use? I'm afraid each leave only it connected so I'm not nearby because I'm afraid he's going to fry or ignite. I just bought this computer 2 months ago.

    Normal use a charger / adapter will get very hot, but they should not become extremely hot. I would recommend that you contact the Lenovo Support for further assistance.

    Lenovo - United States support

    1-877-453-6686
    24 hours a day 7 days a week

  • X120e Battery Charge problem

    Hello

    I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

    So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

    I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

  • Battery charges more than 100%

    Hi, I have upgraded to a new hard drive to 500 GB.

    I cloned the old drive to the new with Acronis.

    Since then, the battery of the laptop (maybe 1 year battery) charge up to 100% and maintains load and will not stop.

    Steps I took to remedy this situation that was not:

    Load all the way and walk back.

    Taking battery, now the power button / stop and connected laptop turn off, disconnected, return to.

    Nothing seems to change, she always perceived when it is plugged.

    When he is in charge, the led is orange, but when it is 90% charged the led is green.  As soon as the green light is on, it does not turn off and windows indicates 100% battery charge.

    Course, it's something to do with windows when I cloned on the new diskette because when the problem started, but I don't know how to fix it.

    Operating system is Windows 7, thanks.

    I fixed it.

    What worked was

    Power off

    battery

    keep the power button / stop for 60 seconds

    plug in power

    Unplug

    connect battery

    plug in power

    turn it on

    and then once I turned it on it 100% charged and stopped!

  • virus battery charge?

    I have problem is preventing the included loaded on my laptop!
     
     
     
    Once out of the low power supply indicator of battery warning 7% armel remaining battery charge one or two seconds
     
    Replacing the battery does not solve the problem!
     
    AN INTRESTING OBSERVATION VERRY!
     
    I install and run some software securituy from my internet provider.  While the software did his thing, start and stop services, I noticed something intresting...
     
    My battery has been recharged very well! I removed the power and battery were reported @ 100% and give off very well for 30 min.  Once the software is the problem came back!
     
    Is it possible for a virus of type som to cause this problem.
     
     
    Anthony

    Hi big95n011037,

    Not likely to contain a virus, most likely an error BIOS or driver. Consult the manufacturer of the system for
    updated BIOS, drivers from the chipset of low level and other corrections possible. Check with their forums.

    Check the other thread you have responded to for more information on battery problems.

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/888ea422-ac6b-46d9-80e9-3d368d8f2319/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Prevent the app to open the window to open the file

    Everytime I open applications like QuickTime and preview, the window open a file keeps popping up. How can I stop this from happening? Thank you in advance!

  • Satellite A350: Error Messages at startup when start Toshiba Console

    We just bought a new A350. I installed Comodo during a Windows Update.Cannot complete installation of Comodo, but makes the update of Windows. We were initially three problems; 1 loses internet connectivity, but not LAN. This has been resolved by ins

  • Satellite Pro U400-135 turn

    I have a problem with my Satellite Pro U400-135. Sometimes when I press the button to turn off my laptop or choose log in windows xp, my pc isn't turned off but reboot! Can someone help me? Thank youDavide.

  • Satellite A500 - error jmcr.sys on when I started

    Hi all Everything worked fine until this morning when I started getting the error jmcr.sys. I did some research on Google, but he couldn't solve myself. Anyone know how to remove it? Thank you for your future answers

  • Deletion of items in array containing "999.0.

    I have a table of 10 items of type DBL. I would like to delete the item if it is a value of 999. For example, the original array is [1.0 1.5 1.6 999 999-6.9 999.0 0.0 4.7-0.1] size 10, the final table should be [1,0-1, 5-1, 6 6.9 0.0 4.7-0.1] of size