Licenses to host ESX table formatting.

I have the script below (thanks to Alan for his help with this) that lists all the license information for my guests.

$ESXHosts = get-VMHost.

Get-opinion

$ServiceInstance = get-view ServiceInstance

$LicenseMan = get-view $ServiceInstance.Content.LicenseManager

$Query = $LicenseMan.QueryLicenseUsage

foreach ($ESXHost to $ESXHosts)

{

$LicUse = $LicenseMan.QueryLicenseUsage($ESXHost.MoRef)

$esxlic = $licuse.reservationinfo.

Select @{N = "Feature"; {E = {$_.key}}, @{N = "no license"; {E = {$_.required}}, @{N = "license status"; {E = {$_.state}}

$heading = "& lt; H4 & gt; » \

out-file - add $filelocation

$esxhost.name.

out-file - add $filelocation

$altheading = "& lt; / h4 & gt; » \

out-file - add $filelocation

$esxlic.------

ConvertTo-Html-body "

Out-file - add $filelocation

}

The only problem is when you export to a html file, it produces a long list, which, although correct is not pleasant view with loads of guests.

The table for each host looks like the table below.

hostname. Domain

Feature	Lol Licenses	State license
esxHost	8	a license
VMotion	8	a license
DRS	8	a license
DAS	8	a license
esxFull	8	a license
VSMP	8	a license
NAS	8	a license
iSCSI	8	a license
San	8	a license

What I want, it's for the table look like the table below.

host name	esxhost	VMotion	DRS	DAS	esxFull	VMSP	NAS	iSCSI	San	State license
Host 1	8	8	8	8	8	8	8	8	8	A license

While it is easy to quickly see the features under license of all hosts, and perhaps only authorized State say licensed licenses are currently used for all of the different components, in other words partial license for example.

In fact, I'd be happy to leave the authorized State if I could list everything as in the table above as then I see quickly what is allowed.

Thanks in advance for any help.

Rog.

Okay, I think that what you want, it's something like the code below. I left the field under license, as is one by characteristic detail which cannot be represented correctly in some cases...

$ESXHosts = Get-VMHost | get-view
$ServiceInstance = Get-View ServiceInstance
$LicenseMan = Get-View $ServiceInstance.Content.LicenseManager
$Report = @()
foreach ($ESXHost in $ESXHosts)
{
     $Lic = "" | Select Host, esxHost, VMotion, DRS, HA, ESXFull,esxExpress, Backup, VSMP, NAS, iSCSI, SAN
     $LicUse = $LicenseMan.QueryLicenseUsage($ESXHost.MoRef)
     $esxlic = $licuse.reservationinfo | select @{N="Feature";E={$_.key}}, @{N="No. Licenses"; E={$_.required}}, @{N="Licensed State";E={$_.state}}
     $Lic.Host = $ESXHost.Name
     $Lic.esxHost = ($esxlic | where {$_.Feature -eq "esxHost"})."No. Licenses"
     $Lic.VMotion = ($esxlic | where {$_.Feature -eq "VMotion"})."No. Licenses"
     $Lic.DRS = ($esxlic | where {$_.Feature -eq "DRS"})."No. Licenses"
     $Lic.HA = ($esxlic | where {$_.Feature -eq "DAS"})."No. Licenses"
     $Lic.ESXFull = ($esxlic | where {$_.Feature -eq "ESXFull"})."No. Licenses"
     $Lic.esxExpress = ($esxlic | where {$_.Feature -eq "esxExpress"})."No. Licenses"
     $Lic.Backup = ($esxlic | where {$_.Feature -eq "Backup"})."No. Licenses"
     $Lic.VSMP = ($esxlic | where {$_.Feature -eq "VSMP"})."No. Licenses"
     $Lic.NAS = ($esxlic | where {$_.Feature -eq "NAS"})."No. Licenses"
     $Lic.iSCSI = ($esxlic | where {$_.Feature -eq "iSCSI"})."No. Licenses"
     $Lic.SAN = ($esxlic | where {$_.Feature -eq "SAN"})."No. Licenses"
     $Report += $Lic
}
$Report | ConvertTo-Html -body "" |Out-File -Append $filelocation

If you found this information useful, please consider the allocation of points for correct or helpful.

Alan Renouf

http://Virtu-al.NET

Tags: VMware

Similar Questions

How will I know when my host ESX 3.5 license expires?

How will I know when my host ESX 3.5 license expires?

Check here, http://www.vmware.com/checklicense/ , he'll tell you.

Copy and paste the content of your license file and click to be valid.

Host esx license problem substituting

Hi all
I have a problem when I try to replace it by an esx host.
We have a total of 20 under license issued, 19 in use (9 esx host have 2 cpu, 1 esx host has 1 cpu).
To add a new host esx (I'll call esx11), I had to unplug and remove a host of VIC (I'll call esx01).
The result is that esx11 is "unlicensed" and if I make a 'survey of status' using license server tools (FYI License Server is installed on Virtual Center), it always reports as licensed hospitality that I disconnected (esx01).
Any ideas?
Thank you in advance.
PIO Massaro

just because you disconnect will not remove the license. You must go to the ESX host, under the configuration tab and the features under license. Change your license source.

Add existing ESX without formatting data warehouses

Hi all, I am new to scripting, trying to find a script that adds disks to host ESX just as we do on vcenter.
Rescan Disks - storage add - select disk/Lun - naa ID is known - Keep existing signature - finishing
Scenario is that: I have 50 + replicated discs that I have to import the site of recovery with a known naa.ids

Lun ID as below:

Disk Fibre Channel (naa.500506680180831a8000000000000505): 1

Disk Fibre Channel (naa.400503480180821a8000000000000502): 1

Disk Fibre Channel (naa.300503380180811a8000000000000511): 1

Disk Fibre Channel (naa.200502280180851a8000000000000435): 1

...

..

Let's say I have 2 ESX hosts nonclustered.
ESX1 and ESX2
How do you want to add these 50 disks to the ESX host with a powercli script?
I'm working on this problem awhile, but could not find a satisfactory answer.
PS: Keep existing signature is not a must, could be assigned a new signature. All I need is not for formatting the disk cause there no are data inside.
Thank you...

It's what

$esxcli.storage.filesystem.mount

allows you to do.

Take a look at Management VMFS volumes

You can do the same thing, with the same settings, with the Get-EsxCli cmdlet

Questions about connecting to a host ESX 3.5 to vCenter 4.1

I need to migrate 7 hosts 3.5.x ESX ESX 4.1. I did not have a test environment and will work with live on committed production systems (not clustered). vCenter 4.1 and two new 4.1 ESX hosts have been configured to handle live Vmotion (cluster will come later). I activated the license point server towards the old VirtualCenter 2.5 in the hope of being able to disconnect a host ESX 3.5 live the old virtualcenter and reconnect to the new vCenter 4.1 without rebooting the host ESX 3.5. VUM is not an option at the present time, so I intend to do a full install base upgrade.
(1) I know that I can disconnect the ESX 3.5 server the old virtualcenter without problem. My first question is, if I try to join the new vCenter (config pointing to the old license server) box of 3.5 will be vCenter 4.1 need to install the new management agent in the box of 3.5 and therefore require the host restarts?
(2) if the agent of 4.1 management is not installed on the host ESX 3.5, its virtual machines can be migrated (cold) to one of the new servers?
I should add that the licenses are not a problem, we are migrating to the latest keys but have sufficient old licenses to manage the transition. The VMs are on SAN LUNs that are visible to guests old and new.
Especially, I want to know what to expect through are exactly what will to restart is required and have not been able to locate that particular point.
Thanks in advance.
hensonj7

When we went from 3.5 to vSphere, is that big of a deal. Just disconnected the vCenter server host and updated the vCenter keeping the existing license server, and then re-attached to the new Victoria Cross. It will establish links with the new 4.1 software, but it shouldn't require a reboot at all. I did mine with all virtual machines out of it, but I think you can do all this live... Since a little while I did this upgrade

-Kyle

«"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

How to get the host ESX DR see replicated Celerra Lun

Hi guys, Im setting up SRM with 2 x NS20 and ive got regarding the configuration of the LUN on the production storage array, Lun on the storage LUN appropriate to prod/dr esx servers present DR Bay. Ive set up replication and added the DR lun to the esx server, ensuring not to add it as he will write a signature. I've then added the production on the production ESX Server LUNs, added storage which obviously writes a signature on the drive, and with the installation of the replication, I expected to simply issue a new analysis on the DR esx host and do see the data store.
Am I missing something here? Any help would be appreciated.
Thank you

Hello

"On DR NS ive done exactly the same thing with respect to FS, Lun, target iSCSI and presented to the host ESX DR, ive done a rescan and his picked up the lun 'Read Only', which is being replicated in but the tab of summary in VC, I see that the local VMFS file system and I was expecting to see the replicated LUN listed with the store local data or is this seen only". When SRM changes the properties of Lun during a failover? »

You will not see the Site recovery volumes listed in data warehouses, unless you do one of two things - a failover in which case the production side will be unalterable and be removed from the list of data on the Production side store while exposing the VMFS data store now read-write on the side of the recovery.

Or you use the test function in which case that encourage a wink of Celerra temporary writable and it will appear as a data store broken in the list on the side of the recovery VMFS data warehouses.

However, it seems that you do not see this result, as DR table does not seem to be configured as it should.

Can the side Production VC communicate with happiness with the Celerra recovery site - IE can launch you a session PUTTY from the Production side VC and connect to recovery side Celerra. Can the recovery side VC do the same thing for the Production side Celerra?

I guess you get the unknown peer after that MRS. not the discovery of the table that owns about 23% forever and then ends. The only other thing I can think of and am not sure about this as a solution because it is a set of actions that I did of my side of recovery when Celerra is to create a small file system and in a small iSCSI LUN on the side of the recovery of the recovery side Celerra and put it in your recovery ESX cluster side - create a file system VMFS on it and place a Virtual computer in this VMFS file system - this is to check that there are no problems with the ESX host side recovery working with the recovery side Celerra

My guess would be a thing of IP connectivity - if it's a little strange, if the link between the Production side VC and the recovery side VC has been established successfully

I'll pass on to a colleague to VMware SRM and see if he has any ideas

Concerning

Alex Tanner

BlackBerry Smartphones host Routing Table vacuum

My blackberry 9930 fone and all of a sudden last morning work was he had no ENCORE and there is no message in the host Routing Table, Ive sent messages that are not delivered and did a hard reset but nothing happens. The service provider says they can't pick up anything.

After you remove the service book, performing the hard reset by pulling your battery while your BlackBerry is on and reinsert again. Now try to register to the THS. Thank you.

God luck!

BlackBerry smartphones don't host Routing Table - no entries

Hello

I have a Blackbery Curve 8520. I have a problem with the connection to the mobile internet. When I entered the host Routing Table, it only shows me no entries. I registered several times but nothing happens. I have a gift of freedom of Vodafone afford data unlimited but I can't connect at all. Could someone help me? Thank you

Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?

You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

Good luck.

Help for BBM blackBerry Smartphones & Facebook does not not for 9320 - problem with "host Routing Table? -Virgin

So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...

At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...

I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...

After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...

24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?

Any help?

Or

Anyone with a new BB knows something like that recently? Thank you

Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.

Good luck!

Empty blackBerry Smartphones host routing table, will not register with network and BIS

I wiped on my BlackBerry 9900 and subsequently, it gave me an error code 507. I reloaded the OS through programs by the Blackberry Desktop software and it was sussuccful. But since then I could not surf the internet with my phone despite having BIS suubscription with my network (Glo, Nigeria) provider. I checked the host Routine table and found it empty. I recorded several times and even removed the battery and replaced it, I also have network diagnostic test and did not get any form of change. I called my service provider and they have checked and confirm the status of my subscription and SIM is ok, I inserted my SIM card into another BlackBerry device and it worked fine. I tried different suggestions on the forum, but non of them solved the problem. Please kindly help me.

Then, you demoted in OS 7.0? Is this an official release aired by your own business? Make sure that it is. At this point, it is best to load the latest version published by your operator.

Then I suggest to contact your operator for the resolution. If they do not have a solution, I would ask to have the sim card replaced. I know you said it works in other devices, but it can still be bad and work in another device. If that don't solve this contact again and has them you reassign to BlackBerry. They are probably reluctant to do, but it needs to be emphasized. Only your carrier, in conjunction with BlackBerry can solve the problem.

BlackBerry smartphones not the host routing table entries

My blackberry storm2 shows no entries in the host routing table. I'm on a service plan that supports BIS everything was fine. My phone rebooted for no reason, and that's when the problem started

Help, please

Hello and welcome to the community!

I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

(1) registry HRT
- KB00510 How to register a BlackBerry smartphone with wireless network
- Please wait a 'registration' message reach your Messages application
(2) remove and return Service directories
- KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
- If you do not have access CMIME, continue deleting
- KB02830 Send the directories for the BlackBerry Internet Service
- Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.
(3) restart to take batt
- Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
I hope that will move things again for you! If any stage does not properly complete, proceed to the subsequent steps will be useless... and you will need to contact your mobile provider for formal support. It's their network that your BB is unable to communicate with, after all.

Good luck!

Empty blackBerry Smartphones host routing table, will not register with the network.

I want to apologize if I put this post in the wrong thread.

So here's the question. I sent a request to my service provider to upgrade several SIM's have Blackberry service added to them. I asked specifically for them to make sure that the SIM card have been set to BES not BIS. The first SIM card I try to register with the network does the following for me. The phone, before I save it with the BES server can call and surf the internet. Once I have sync the phone with the company's server and I go back outside to check on her send and receive these emails, I try to control the internet and it says that the service is not available. I have 3G (Yes capitol) service and I can make phone calls. The host routing table is empty and when I try to save the phone it just says 'sent message' but I never receives the roads. I wiped the phone and repeat the steps with the same result. I contaced the carrier because all the Google search I did pointed to the carrier but they swear the correct plan is attached. Please if anyone can help me it would be greatly appreciated.

Hello and welcome to the community!

In fact, he should persist with the carrier. But first try to remove this BB to your BES, then by the ResetToFactory WIPE to remove the it strategy. Then run everywhere with the BB, ensuring that you can do all the activities of BIS (including filling of the HRT) before activating the BES. If it continues to fail, then you must climb the carrier and BIS get work before you activate BES.

HRT and the functions of BIS should not be affected by BES, unless there is something in your it strategy that does. It is not very likely but it should impact the devices ALL active BES, not one only.

Good luck!

Record blackBerry Smartphones host Routing Table

Hello

I have an unlocked wind Blackberry Bold 9700 which works very well on the Fido network, but curiosity got the better of me and I was messing around with the host Routing Table. I selected the menu on one key and you click on sign up now. Everything still works well, but I mess anything up?

michaelquan21 wrote:

I received a message. But does that mean?

This means that your device is registered on the network.

It's a good thing.

DonWorryaboutIt!

Trying to increase the capacity of virtual resource Flash, no host esx and no SSD is located

In vSphere 5.5 WebClient, click host esx-> settings-> virtual Flash Resource Management.
Then click on the button 'Add ability '. Empty the list of hosts/SSD devices.
I followed the instructions with this announcement, but the list of hosts/SSD devices remains empty.
https://communities.VMware.com/thread/464660
Anyone know how to get around this problem? Thank you!

It works indeed. You need to do some CLI commands to mark the device as a local and an SSD, but I outlined the steps in a post on my blog:

http://tomverhaeg.nl/VMware-ESXi/VMware-ESXi-tag-a-device-as-local-and-SSD/

Adding new host ESX in VCD 1.0

Hi all
I wanted to know the procedure to add the new host Esx VCD and how to increase resources for the installation of the existing cloud.
Thanks in advance
Ashok

Add the host to the Cluster support required in vCenter provider vDC, ensure that networks and required data warehouses configured on this host, and finally as a system administrator in vCD under surveillance & -> resources vSphere management-> Hosts, prepare the new host ESX (i).

Licenses to host ESX table formatting.

Similar Questions

Maybe you are looking for