M30X touchpad has weird

Similar Questions

• my phone has weird colors

  Hello I have an iPhone 6s more edition rose gold just for a month never dropped it or nothing, but my phone has weird colors that took it back too my phone carrier and they said id have to buy a new phone, but I just got this phone and has nothing to him. I took it to a phone place repair simply too ask questions and they said it could be possible WATER DAMAGE! But my point is that I did nothing to him as I never gave up and I have a case of proof of life and although he has never been in or near the water. Please help I really need my phone do you think if I bring it into apple they might help?

  flyinhwyn808 wrote:

  Think that if I bring it to you in apple they could help?

  I think so.  They can watch and advise that you based on what they find.

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• Touchpad has stopped working on Satellite A30

  The touchpad has stopped working, I tried most of what is obvious
  any ideas?

  Hi Phil,

  I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.

  HTH

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Touchpad has lost some features

  My touchpad has lost some features... I can still do the click function but striking swiping does not move the cursor. (I had to add a mouse to the laptop to get my cursor to move).

  It begins only after I have connected to the computer. The touchpad has all of the features, while I'm on the login screen, it starts only failed once Windows appears. Which leads me to believe that this is a setting in Windows.

  I tried to disable and re-enable the touchpad in the mouse settings functions; remove the touchpad Device Manager and restart the computer. checked all my touchpad settings were the same, none had changed.

  Windows says I have the latest drivers for the device. But just to be sure, I entered my model number of the laptop on the Toshiba Driver Downloads box and downloaded the synaptic drivers. When I tried to install these drivers installation has failed. (I have not yet tried to remove the drivers that came with the laptop, but that try next if I can't find something else that solves this problem.)

  Can someone please offer suggestions on what else to try?

  At first, I must say that it will be interesting to know what model of laptop you have and what operating system you use.

  Have you tried to turn the touchpad on or off using the F keys?

• Satellite A200 - touchpad has stopped working

  I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.

  What should do?

  Why you n t trying to update or reinstall the driver of the touchpad?

  I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.

  Concerning

• Touchpad has completely frozen

  I hope you guys can help.  My HP touchpad has frozen everything simply up.  No responses to any keys.  The button will Flash, indicating that I have messages.  But when I hit the power button - NOTHING.  When I kicked for 30 seconds - NOTHING.  When I plug it into a USB - NOTHING.

  Since there is no option to shoot battery how to reset this thing?

  Too bad... Press the CENTRAL BUTTON and POWER at the same time for about 20 seconds. That reset.

  Man, I hate to see these issues with WebOS... > :-(

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

  

  My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

  I click on the color picker and where I saw the normal color #0000ff blue on my windows computer, this version of mac mountain lion shows a color purple-ish. Strangely, if I enter the # hex in the color picker and use it as a filler, the correct color appears on the scene, but when I use the pipette on that color, it shows as purple color again on the toolbar.

  I saw something similar to this happen when you use adobe photoshop. However, the usual solution is just to do the color management profile to monitor RGB. The only drawback with Flash is there is no preference to set. The palette of colors in Adobe Photoshop displays as it should with correct blue.

  I should also mention that I use a Samsung 941bw monitor with my mac mini, which could also be part of the problem.

  I thought I would make this post anyway, just in case it's the OS & Adobe Flash CS6 and not the monitor.

  I've included a screenshot over which shows that I chose the color purple and then did a form of a rectangle on the stage and it comes out blue.

  Thanks for your response (s)

  -Line

  You can try to change the display settings of your monitor in Adobe RGB color (1998).

  System Preferences > displays > color and see if that helps.

  Thank you

• Tecra S1 - Accupoint / mouse Touchpad has become crazy

  Hello

  I bought my Tecra S1 second hand about 2 years ago and it was working fine until I realized missed me the video card driver, once installed the cursor on the screen went weird, he kept by adhering to one side of the screen for a long time, I uninstalled the driver but nothing works She continued to do until I completely lost control of the mouse whenever I opened my laptop.

  Recently, I decided to reinstall Windows XP Home edition to see if it was a software problem (of any kind) but still the problem of cursor. I don't know how an installation simple driver on my laptop has created such a hassle. I I am convinced that it is not a hardware problem since any device of mouse I use (mouse, touchpad, accupoint) the nuisance persists.

  If anyone has any suggestions / solutions please let me know.

  Thank you

  PA

  Hello

  I have older Tecra M1 and I had this problem. AccuPointer was defective and after Exchange of keyboard, everything was OK again.
  Only thing you can do is to use an external mouse and disable the double pointing device in the properties of the mouse or by using the FN + F9 key combination. I did the same thing.

  Of course, the touchpad driver must be installed.

• Satellite M50 - A - ELAN touchpad has stopped working

  Hello

  My keyboard and touchpad no longer works out of nowhere (I think that it is after the update of windows?) and I can't seem to be able to fix it, I tried to reinstall the drivers for the touchpad and nothing has changed, as I could not find the drivers for the keyboard.

  can someone recommend me to do? I'm going crazy with this laptop!

  (The model is Satellite M50-A-118)

  Posted by osyeon
  

  UPDATE: I did a system restore and now everything works, quite naturally, this last update windows messed up with my laptop

  Thanks for the comments.

• Touchpad has stopped working on my Satellite L750

  Can anyone help please?

  The laptop was working fine then the mouse no longer works.
  I don't know if my husband has touched a button or if there is a problem.
  Any suggestions are appreciated.

  Thank you

  Hello

  Maybe just the touchpad is disabled? Try to use the FN + F9 key combination to re-enable the touchpad.

• TouchPad has stopped lighting up on top of my laptop satellite

  Hi all

  I have Satellite A series for the last two weeks, that my touch pad has stopped lighting upward. After looking into it, I can't find a driver for touchpad to set the touchpad settings. The mouse settings are there but no details of the touchpad. Unable to find all the files on it either.

  I tried to download a new driver for it but it still happened upward with an error that it cannot install a new driver. The touchpad works well, it does not and I have no way to fit it.
  Help, please. It drives me crazy. I had a few geek telling me it might be a hardware problem. Is this possible?

  Any suggestions would a girl very fed up very happy.
  Tired of... because I tried to install SP1 since February but not luck... given to the top about it now, but it is still driving me crazy that I can't do it...! .. 800F0826 .error if someone knows a solution I would be grateful for instructions.

  My laptop Tosh since more than a year and a week after the warranty expires, he began to play up... Hmmm?
  Any help much appreciated... Thanks a bunch
  Freddie

  Have you tried to roll back the BONES to the bygone era? System Restore tool and try to roll back OS two weeks check back.
  Please post the result.