Manage data sharing

Similar Questions

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Show: not allowed to manage data

  Well, I had the upgrade work and everything seems good, except when I go to edit the configuration files and manage data, I get: show: not allowed to manage data

  I checked that the edition code is in:

  • datamanagecode
  • editcode
  • enadiscode

  and I don't see any permission issues.

  Any ideas?

  Thank you.

  Daryl

  like changing the ID groupd of these files to the web server group ID

• Enter the data shared via BBM inside an application

  Hello

  I need to capture data shared via BBM inside my app BB10. I need to recover the data shared via BBM and then integrate it into my application.

  Is this possible. There is an onShareContent in the BBM-BB7.  We have this method in BB10 on the receiver side.

  This will then run on the receiver side. This must be set before the call to register()
  BlackBerry.BBM.Platform.Users.onsharecontent = function (sender As Object, content, description, timestamp) {}
  try {}

  } catch (e) {}
  TODO: handle exception
  Alert ("sharecontent.init Exception" + e);
  }
  }

  Kind regards

  Annuk

  BlackBerry 10 it is not possible to intercept data shared to BlackBerry Messenger.  But, your application can be a target from any application that supports sharing.  See the link below for more information.

  Receive call

• Purge the concurrent request and/or Manager Data - take long & end with error completed

  Purge the concurrent request and/or Manager Data - take long & end with error completed.

  What ever the age values 30,70,1000

  ****

  Select count (*) in the FND_CONCURRENT_PROCESSES;

  COUNT (*)

  -----

  32149

  ****

  Select count (*) from the FND_CONCURRENT_REQUESTS;

  COUNT (*)

  -----

  585499

  ****

  Request of min | Application of Max date | Date

  -------------------- --------------------

  SEPT. 13.-10 10 OCTOBER 13

  My problem is now solved

  the cause of the problem was:

  After the clone for the new Production Server FND_CONCURRENT_PROCESSES & FND_CONCURRENT_REQUESTS table 'old' lines were still talking to the node that is no longer available in the new production to LOGFILE_NAME and OUTFILE_NAME columns.

  And after the removal of these lines, executes the request was very quick and works as it should work now.

  Thanks for all the help I get here and with the SR team too

• Data shared between applications

  Hi all!

  I am writing a small application, and I wanted to separate the user interface in two applications to reduce by clicking. But they have a lot of data in common, so I thought that maybe I should have a third application that manages just the push / pull aspect? I'm doing exactly how (if we can) share data between two applications?

  An XML document or something like that would be perfect. Maybe a few pictures, if I'm really lucky.

  I would also say RuntimeStore if data should not be persistent and the images become large, then don't look to put it on the SD card.  You can also consider RMS store, but for a native Blackberry application, the other options are probably better.

  You can store an XML document in all these places, but this means that you will allow the analysis whenever you need to get some data from it and/or update some information there.  PersistentStore and RuntimeStore are object storage, you can store the object analyzed, what could be more effective.

  Suggestions apply to date only if the data is dynamic, if the data is static (for example, the code and still images), then you can create a shared library that is used by both applications.

  I think that all of these options are discussed to some extent in the developer's Guide, I would say you have one skimmed through here.

• Video metadata date is incorrect: the value and not of creation date sharing

  10 iOS, iPhone 6 +, Windows 10. Photos and videos are shared through iCloud, but NOT stored in iCloud.

  Once synced on my PC, the photos and videos have a truncated name (for example, "016a1f2e11dfcc680e1009cb96346b67678fb2c6bc.jpg"). Of course, this is not acceptable at all to me when I organize them on my NAS: I prefer a significant, sortable name, as "2016-09-16 18-15-20259 (Apple iPhone 6 more) .jpg.

  To do this, I simply read the EXIF information directly from the image, and I rename the image accordingly. No problem for the photos.

  But for videos... I do the same, in the world, but with less information. I can extract only creation date/time from metadata of the videos, not the unit that captured video. Sad, but I have not found anything else, and at least it's automatic.

  Recently, I found that the date in the video file is NOT correct: this is the timecode of SHARING via iCloud, not the timecode CAPTURE. I have therefore some videos with a delta of two weeks between the true creation as well as the "official" date

  I checked this on my phone: date is correct (once the video is no longer in full screen, the date is displayed at the top of the screen, and it is 'the' date I'm looking).

  So, question: How can I get the date of the 'real' creation of all these videos on my PC? It exists: it appears on the iPhone that took the video (a woman) AND mine. Information is 'lost' only on the PC, but I think it's a problem of reading of 'bad' metadata (I use FFMPEG to get currently), or the wrong file for reading (perhaps within an iTunes/database file, but didn't find, not found in the registry or the other).

  Best solution is to find something operate locally, through the command line, to do it in batch mode. A solution of GUI PEUT agree if I can automate with AutoIt (i.e. should not be a native Win32 application, not Java, .NET, GTK, QT and so on, OR must have an export feature). A solution based on the web is not suitable, but can be less boring to review each video one after another to manually check the date.

  Thanks in advance.

  In my opinion, the only way to fix this is with third-party software like this one.

• Manager of sharing profile settings

  In any case to push sharing settings of the profile manager who does not post installation script script or login?

  You might try to push the "custom settings" to the device or set of instruments, but there is no nice way AFAIK.

  C.

• HP Pavilion Entertainment PC: Can I use HP Recovery Manager Data Backup If my hard drive broke down?

  I am running Diagnostics on my PC. I don't know if my hard drive is completely broke down, or if my hard drive has a formatting error. I'm currently back up all my data using HP Recovery Manager, because I may decided to restore my computer to its factory settings to correct I hope than the hard drive. My question is: if I can run HP Recovery Manager and data Back, it means that my hard drive is not broken?

  ghahs

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about your hard drive problem and wanted to help.

  Let's start by defining some terms.

  When a disk 'crashed', it means a hardware failure, such that the disk cannot be read. You can not write on the disc or read him.  It can only be repaired by this disassembly and replacement of parts.  This must be done in a clean room environment and the cost to do that starts at $1000 USD.

  When a disc has "failed", this could mean practically anything.  In some cases, this means that the file system is damaged.  This may be due to the closure of the PC in the middle of a write operation, as when all of a sudden, you turn off your PC.  This can also be due to hardware problems as for lack of sectors.  In both cases, the drive is probably still usable, but in the second case, it won't be for long.

  So if HP Recovery runs, then it is not 'crashed', but he could have 'failed' - and in the latter case, if she fails to sectors, replace faster you it, the better.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Pavilion dm4 2191us: restoring a backup made with HP Recovery Manager - data recovery manager has since been removed

  My system (portable Pavilion dm4, Win 7 Home Premium x 64)) is works well but I would like to restore a backup of data made with HP Recovery Manager. HP Recovery Manager has since been removed from the system and I don't have a recovery disk. I tried to install sp45415 that supposedly runs a silent installation for the Recovery Manager program, but it fails silently on my system. The notes say that it applies to Windows 7 computers and the Pavilion dm1 and dm3. There is no mention of the dm4.

  Y at - there a trick to getting sp45415 to work properly?

  Y at - it somewhere that I can download an installation package for HP Recovery Manager that works on the Pavilion dm4?

  Is there another tool that can restore the backup made by HP Recovery Manager?

  Thank you!

  If you have uninstalled Recovery Manager he probably removed the recovery of files in the recovery partition. When these files are not deleted download Recovery Manager will install. You will need a recovery media to boot from to restore the files and the recovery partition. If you do not have a recovery media you order from HP.

  As for the files you are trying to restore - if it's a backup of personal files, photos, etc. to the outside hard disk or DVD must be a file .exe inside these files, probably of Restore.exe or Recover.exe. Double click on the .exe will extract files to a folder on the hard drive of your laptop.

• How to stop instances of a Subvi from data sharing?

  My first experience with a Subvi I created myself has no . The first instance works very well. But when I use a second instance of the Subvi that they interact with each other. They seem to be somehow sharing data.  In other words, when I probe a wire inside a Subvi instances I see values that should be present in the other instance.

  I created the Subvi in literally "manual mode". Everything falls into place as examples of 'LabVIEW Edition student of 8'.

  The code works fine if you use is not in a Subvi. In other words, when I "cut - paste" the code several times, it works correctly. But when I wrap the code in a Subvi I get interaction between bodies. Has anyone else had this problem? What do you have on this?

  Thank you

  You have several problems.

  1. your main VI which calls a Subvi is called USC_SG_subVI, but you posted USC_strain_subvi.

  2 USC_strain-sub-VI, is NOT configured for a re-entrant execution.  Look at the file/VI then execution properties.

  3. you use a node of feedback within the Subvi.  (Which is another variant of a change uninitialized records).  I recommend that you keep the Subvi feedback and make it a part of the master while loop in you main VI.

• data sharing from windows to android

  How to share wifi secure with an Android phone. When I try to turn on sharing it said no data connection although wifi is on please advice

  Concerning

  Ankur

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you do not want to share your data from Windows to Android phone. I will certainly help you to question.

  I suggest you refer to the suggestion made by Shawn "Cmdr" Keene [MVP] replied on 15 September 2012 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-to-share-files-from-PC-to-Android-Tablet/7194a433-8e2f-4CC6-9e47-08d4d9651147

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Data sharing on BBM

  Hello guys,.

  I'm doing a sharing application application data of my course on BBM BBM contacts. Tried with classes as 'bb/platform/bbm' but not exactly get it. We have sendDownloadInvitation() of the API in the MessageService class for the same, but sends invitation to download BBM app to BBM contacts? Any help would be appreciated.

  Thank you

  Dev

  I guess you have to use the framework of the call for this.

  Take a look at settings

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/invocation/BBM.html

  And these are the examples of code

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/invocation/sending_invocatio...

  I hope this helped a little.

• Manage data stored on app removal issues

  I just went through this article

  Manage the data recorded during the withdrawal of an application

  and a few things are still is unclear to me. Can be up to me

  It is said

  Understood. Large. Makes sense.

  then the following line messes things, at least for me.

  Now, in saying an application stores an object with a package named com.mycompany...

  the author is an object IN a package or what?

  The vector object belongs to Java.util; package,

  and you can use it in your application by importing it into your package.

  The logic would be: If you use a vector object in your application in your app package for store items and no other application does refer to this set the persistent object containing the vector object is removed.

  The other method by wrapping a vector object in your own class is understood but seems to be a pirated upward.

  The other question.

  Not a word about how to keep the persistent object if a user wishes to immediately remove an application.

  Say, I have an application that stores data using the persistent model.

  I want to delete it for some reason any.

  Now, on the deletion, the application must ask me (the user)

  If I want to remove persisted data or keep it.  A dialog YES / No.

  So, if later I decided to install the same version or a new version, the persistent data are available the application.

  Any thoughts on the issue?

  Thank you

  You are right, that the Application should run with a thread of event, the listener to be invoked.

  Regarding the packaging, I am happy with both approaches, but I have to be honest I don't see a significant difference between your own vehicle or with your own object.

  Ranging from vector and use do not create another object, it creates a different object.  But if it's your vector or vector standard, it is still just an object.  Or have I missed something?

• Manager data blackberry 8900 to Z30 Smartphones blackBerry dekstop inside problem

  Hello

  My old bb is model 8900.

  I have the bb dekstop update manager 7 & trying to pass data for bb 8900 to Z30, but he failed.

  Then I try to downgrade version dekstop manager but she also fail to import data to my new bb.

  The dekstop manager can not connected with my bb & hang...

  Please help me!

  Hello and welcome to the community!

  The Desktop software is not able to work with the new devices BB10... you must use the LINK:

  • http://us.BlackBerry.com/support/transferring-to-BB10-device.html

  Good luck!