Similar Questions

• Should there be locking plates and joints locking on cartridges on Color LaserJet CP5225?

  We ask the support of HP in Russia several times, but they cannot tell us:

  should there be blocking plates and locking seal on cartridges on Color LaserJet CP5225 or not?

  
  Maybe it is not the correct names for these articles in English, but I hope that my question will be understood.

  We just bought this printer and have a dispute with the store on this theme.

  It is a very major question for us in the situation.

  PS why the manufacturer regional technical support is unable to answer this simple question?

  P.S. We also wrote to Russian technical support via the HP web site and have no answer for more than two weeks!

  The cartridges are shipped in the printer and when you first power that they go through a process called alienation, the cartridge is 'open', so the toner is not in contact with the drum, closed power for the first time the toner cartridge and drums can work. in the United Kingdom, when the training I often show engineers one ankle clothing, we use Spring hanging out washing on a line, squeeze one end and the other opens, it is similar to the alienation, a cam turn, based on the cartridge and opens or closes.

  There are no seals or strip to remove, you unpack the printer, plug in and turn on, alienation is preparing the cartridges.

  There is a known issue with the loss of magenta or cyan, the symptom is the color will be poor and can fade in page or it is may be missing completely.

  One is there is a black plastic Panel, when you open the door, it is above all the cartridges, this can loose so that it touches the magenta or cyan causing loss of color, in some cases this Panel comes off when the printer is shipped.

  It can be difficult to see, but if you remove the cartridges you can see left and right panel is in contact with the metal frame (when you look up at the top of the cartridge cavity), in the Middle you may see a gap of 3 or 4 mm and the Panel may be a little lower When the alientates of the cartridge during printing it touches this Panel and rub off.

  If it is the plastic Panel, it can be very difficult to see the small space, we saw that several times in the United Kingdom and sometimes replace the Panel in order to ensure a good fit.

  I can't put the photos of this on an open forum and here, the opinion of HP is not public, so this is a situation that you would need to print test pages and HP would repair or replace if necessary.

  Without being rude, it would sound the store aren't give you good advice?

• Manufacturing of the simpler regions on a map of the world... looking for advice

  Hello, I use a card world that initially came is Wikimedia: http://commons.wikimedia.org/wiki/File:BlankMap - World - Microstates.svg or istockphoto, I don't remember which exactly but they are both built in the same way - where each country in a general field is grouped.

  I want to associate groups of different countries in the regions, as in the example of Asia in the image attached to this issue. Countries have thin lines as borders, what I'm looking for the easiest way to delete and merge into a single plan.

  This will finally on the web as an image vector interactive mouseover (have not yet decided on flash or javascript, canvas, svg, vml), so removing the extra points are essential in the size of the file and maintainability.   Advice will be greatly appreciated.

  Thank you

  Court

  (PS: I had actually posted a similar question before, but this card seems to me does not make the process explained to me previously.)  Since each country has it's own/track of the border, I can't use the Scout to solve)

  I still don't see your image after, but one thing you might want to check before you apply the pathfinder is to see if the accident vascular cerebral/sketch of the country has been extended to a path and if so, make sure that you also select those with the forms of the country. I came across some images of stock vector map, which is the case. If this isn't the case, and your forms simply do not match very well, a quick way to get rid of all the borders remain unwanted would choose the resulting shape you created using Pathfinder and selecting the brush of Blog (assuming you have CS4) with her has the same color as the fill color of the shape you want and just painted on gaps. It would be much faster to try to remove it with the pen tool.

  Larry,

  The OP is looking to reduce the number of control points in the image.

• The manufacturer custom driver cannot be updated.

  Hello, my computer is a HP p6642f with windows 7 64-bit OS.  I need to update my graphics card for games, I tried to update my HP graphics card but the version on my computer shipped with is the latest version, as the HP 8.15.10.2119 as dated 20/04/2010.  I do not exactly know what graphics card I have, my dxdiag says;

  System

  Information System

  Current date/time: December-12-26 19:07:40

  Computer name: OWNER-HP

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600)

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: p6642f

  BIOS: 12/07/10 14:03:04 worm: 6.12

  Processor: Intel Core I5 CPU 650 @ 3.20 GHz (4 CPUs), ~3.2GHz

  Memory: RAM 6144MB

  Page file: 6649MB used, 5106 MB of available space

  DirectX version: DirectX 11

  Display

  Device

  Name: Intel(r) HD Graphics

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics (Core I5)

  DAC type: internal

  Memory total approx. : 1760 MB

  Current display mode: 1680 x 1050 (32 bit) (59Hz)

  Monitor: generic PnP monitor

  Drivers

  Driver: igdum64.dll, igd10um64.dll, igdumd >

  Version: 8.15.10.2119

  Date: 20/04/10 21:18:38

  WHQL Logo would be: n/a

  DDI version: 10

  WDDM 1.1 driver model

  What I need to know is what graphics card I have the latest update what are not compatible and how to install the new version, the driver from the manufacturer to measure.  Any help will be greatly appreciated.  I got 2 games for Christmas, DOOM 3 BFG edition and limited edition of Medal of Honor Warfighter.  Will not run and I suspect that my graphics card update can fix these two problems.  When I try to load edition BFG DOOM 3, I get the message:

  'Unable to initialize OpenGl' followed;

  Timing QA INIT: 000124ms
  D3BFG 1.1400 win - x 86 November 9, 2012 10:38:21
  3192 MHz Intel CPU with MMX, SSE and SSE2 and SSE3 & HTT
  5872 MB of memory
  -1284 MB of video memory
  Winsock initialized
  Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 netmask NULL - skipped
  Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
  Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 netmask NULL - skipped
  Sys_InitNetworking: adding loopback interface
  Doom using MMX and SSE SIMD processing
  flush to zero mode
  anomalies-zero mode are enabled
  -Initialization of file system-
  Loaded resource file _Common.resources
  Loaded resource file _Ordered.resources
  Loaded resource file _Sound_pc.resources
  Loaded resource file _Sound_pc_gr.resources
  Reading resource CRC...
  Current search path:
  C:\Program Files (x 86) \Steam\steamapps\common\DOOM 3 Edition/basis of BFG
  C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
  file system is initialized.
  --------------------------------------
  WARNING: Could not open the resource file maps/_startup.resources
  -Initialization Decls-
  ------------------------------
  Failed to open the log files
  execing default.cfg
  could not exec D3BFGConfig.cfg
  couldn't exec autoexec.cfg
  -R_InitOpenGL-
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. whose window class
  .. that fake window class
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 640
  dmPelsHeight: 480
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1680
  dmPelsHeight: 1050
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  Unknown command "vid_restart".
  Cannot initialize OpenGL
  Closure of the OpenGL subsystem
  .. .shutting to the low LHQ

  And when I try to load Warfighter of Medal of Honor Limited Edition I get a window saying:

  'Creation of device DirectX error' followed;

  Could not create D3D device of at least version 10.0 on card 'Intel(r) HD Graphics' chauffeur 'unknown '.  The error is DXGI_ERROR_UNSUPORTED ('East.').

  This is usually casued by not only not the minimum required DirectX support in the GPU.

  For the NVIDIA GPU, DirectX 10.0 support is required.

  For AMD and GPU by other sellers, DirectX 10.1 support is required.

  Okay, for Medal of Honor veteran it says my graphics processor does not support DirectX 10.1, but the fact is that I have direct X 11 which contains everything contains DirectX 10.1.  So I guess DirectX or Medal of Honor Warfighter is looking on behalf of my video card, comparing it to a list of compatible cards, my card has been customized by the manufacturer is not on the list, and if he refuses to try to load DirectX or Medal of Honor Warfighter?  I don't know if there is another way to fix it would be great, but I really want to update my video card.  I heard that the update one driver custom manufacturer can casue instability, but I'm willing to take the risk.  If I can't get a solution to my problem here, I would at least know what is my model of graphics card other than just "Intel(r) HD Graphics (core I5)" so that I can continue the search on my own.

  Here are the specifications of your desktop HP Pavilion p6642f. According to specifications, your computer has integrated Intel HD Graphics using the Intel H57 chipset (when a compatible CPU is installed). There is no driver that will allow you to play these games with the integrated graphic solution effectively very low power that is in your computer. The only way you will get to play these games, is to buy a new game rated PCIe x 16 graphics card and a new PSU rated for the graphics card. Please see 'selection of a discrete video card Dave_G Guide' for more useful information on this subject.

• Parameters of DVD/CD region change problem

  I have a laptop HP with a master CD/DVD Toshiba MK 8025GAS player with the slave TSST Corp CD/DVD TS-L532M
  I can't change the region settings, as says I have 1 change left, but when I try to change the region setting 1 to 4 in the region, I get the response "unable to update region setting. Make sure the drive contains a region 4 media and you have administrator privileges.
  Can you please advise me what can I do about it? Thank you.

  At first, I must say that the notebook manufacturer is responsible for all of your problems laptop and no manufacturer for each component material.
  I have Toshiba laptop and inside is Samsung HDD. If I have problems with it I n t Samsung but Toshiba contact.
  You know what I mean?

  Back to your question: do you have (your account) of administrator privileges?

• Question about change in ODDs region settings - Satellite Pro A120

  Why are there at - it limit the number of times, you can change the region settings when you watch DVDs from other countries? Why?

  They don't realize the world becomes smaller and is it possible to buy DVDs from anywhere in the world? They refuse to help the global economy? I have a Toshiba Satellite Pro A120 with a carpet * a UJ841S optical drive that is locked on region 1, how can I get it unlocked and how do I get it so I can watch DVD so many different regions without having to be limited to the region of switching 5 times? Of course, I'm not the only person who feels this way, come on Tosh do something to help the consumer.

  Can anyone help?

  Published by: ADMIN

  Hi Paul

  What to say I put t understand this too, but there are some restrictions of manufacturers of different record companies and movie studios that don t allow you to change the region code.

  The world is divided into 7 regions of DVD.
  Region 1 - Canada and the U.S.
  Region 2 - Europe, Japan, Middle East and South Africa
  Region 3 - South and Southeast Asia
  Region 4 - Australia and South America
  Region 5 - Africa, the Russia and the rest of Asia
  Region 6 - China

  Readers of generation original DVD came with a firmware level that became known as RPC 1.
  RPC 1 discs themselves are able to play any region but depends on the installed Reader software to control which region is played.

  But most DVD players (* not matter what is manufacturing *) are equipped with the RPC-2.
  RPC 2 drives usually come with a limit of 5 change on the regions, once the counter reaches 0, your drive is locked permanently in the last region it was settled in.
  Even if you reformat or move the drive to another system, it will be always locked to the last region.

  Such a region code limitation is very annoying for everyone, but nothing to do
  Of course you will find many websites that provide any software programs and free non-legal area, but for the most part, these programs can damage firmware own disks and this would lead to bigger problems. In most cases readers cannot handle all mediums and can not read or burn to CD/DVD.

• Need of manufacturing information for sending my laptop REAL TECH needed!

  Just for starters, I'm sick of assistance phone hp tech, really sick. Dude load me a program where a technical expert remotely controlled my office and then grew up cmd and typed "Echo 817 virus found fatal" and then offered to fix it for me for $ 100...
  
  This is the case, the hard drive is formatted freshly, all drivers updated, usb update driver and reinstalled. Work of the USB 3.0, 2.0 does not read anything. No error found. It is positive 5 Volts goes to pin 1, it has zero on GND and GND ohms good. Pins look great. I have a laptop of 1020us Folio13. I KNOW USB 2.0 had problems on these laptops since the date of manufacture.  My cell phone is always underwarrenty, I need an address to send it in to fix it. If any true tech is out there that can help me and not treat me like a fool, I would be very happy.

  Hello

  You need to contact HP directly to get an number and case instructions how to send your machine (they even provide a box or something for you) otherwise your machine will get nowhere in their jungle. You can find a number in the following list:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html
     http://welcome.HP.com/country/W1/en/support.html

  (You may have to a web site in your region/country, phone number should be around).

  Kind regards.

• Media Player - United Nations able to return to region 4 - Australia after having changed to region 1 US

  I am unable to return to region 1 after having to change from region 4 to read a dvd for this region, why is there only a limited number of times, you can change a region?

  How can I get the option back to region 1, installation is there, but the function is frozen or out of use, why is there only a limited amount of time you can do?

  How can I get my Media Player to work again?

  very angry. Help, please

  Adelina

   

  Hello

   

  1. what operating system is installed on the computer?

  2. What are the changes remaining in the below mentioned location?

   

  The functionality of DVD region does not belong to Windows Media Player, it belongs to the CD/DVD drive. It is the manufacturer of the device.

   

  The limited number of changes is by design.

  When you navigate to the following location, it gives you this caveat.

  (a) open Windows Explorer, right click on the DVD drive.

  (b), select Properties, select hardware;

  (c)
  Select the DVD drive, select Properties

  (d) select DVD region

  Warning: You can change the region a limited number of times.

  After changes remaining reaches zero, you can not change the region even after reinstalling Windows or move the drive to another computer.

   

   

   

  If the remaining changes are null, unfortunately the only thing you could do, is change the CD/DVD drive.

• When I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.

  I recently had a new hard drive installed; now when I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.

  Hi AnnEdelstein,
   
  To resolve this problem, install the latest version of the video card driver.
  Contact your video hardware manufacturer to find out how to obtain and install the latest version of the video driver for your video device.
   
  To see if applicable driver updates are available, visit the Microsoft Windows Update Web site at the following address:

  http://update.Microsoft.com

   

  More information on:

  How to manage devices in Windows XP

  Keep me updated on the status of the issue.

• How to check the manufacturing date of the Z2?

  Hello, so the title sums up pretty much everything this. On the previous xperia phones, you can check under the battery, with xperia Z, that it was written on the back at the bottom but on Z2? How to check the date of manufacture?

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  This label can be found in the MicroSD slot, click on the following link:
  http://Userguide.sonymobile.com/referrer.php?region=en&product=Xperia-Z2#IMEI-number.html

• Region with Vista Home DVD code problem

  I have a sony vaio cr290 bought in the United States. I would like to change the dvd region code HT now moved it to the India. its asks me to insert the media to change the region code, I hv tried 4 left. Help, please. I have no Vista support since the laptop is with Vista Home installed. The DVD recorder using pioneer dvd - rw dvr - k17 ata device.

  Hello

  Check with the system manufacturer and the manufacturer of the drive because there may be limits in place
  to avoid changes.

  Have you checked control panel - Device Manager - CD/DVD - double click on the drive.
  DVD region? Be sure to be logged on as ADMINISTRATOR

  Have you tried to connect as ADMINISTRATOR mode without failure?

  You have any CD/DVD programs running at startup that might be locking the
  by car?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  --------------------------------

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to be able to
  other regions to read even if I have no experience with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

• DVD wrong region

  Hello:

  I have Windows 8 Pro installed on my Acer laptop.  However, I am not able to play DVD movies.  When I put the DVD in the DVD drive, nothing happens.  Sometimes, I get a message that the DVD region is not correct for the DVD. How will I know what is on the region and how can I reset the region to reflect the country.  I am in the Canada and bought the DVD in the Canada.

  Thanks a lot for your help.

  Liz

  Hi friend, you must follow the following steps to change your DVD region

  How can I change my DVD region?

  DVD movies are encoded for different regions of the world, and your DVD - ROM drive must be configured for the region appropriate to read the DVD.

  If you have the DVD decoder software installed on your computer, you can usually change the DVD region setting DVD decoder program. Follow the instructions in the help file for the program to change the DVD region setting.

  If you have a software or a DVD decoder installed on your computer, you can use Device Manager to change the DVD region setting in your DVD - ROM configuration:

  1. Click Start, right click my computer and then click Properties.
   
  2. in the Hardware tab, click Device Manager.
   
  3. in the list of devices, double-click on CD-ROM/DVD-ROM drives, click on the DVD drive for which you want to change the region setting and then click Properties.
   
  4. on the DVD region tab, make the desired changes.

  You must be logged on as administrator or be a member of the Administrators group to change the region of the DVD.

  Note that the DVD region for most of the DVD-ROM can be changed up to five times, and the number of available changes lies in the region of the DVD tab. If the tab indicates that you can change the parameter one more time (remaining changes = 1), you will not be able to play DVDs using a DVD region that is different from your last selection. If you miss opportunities to change the setting (change remaining = 0), contact the manufacturer of your DVD-ROM to redefine this value.

  Also install it DVD decoder as a DVD decoder or codec problem might even cause the problem with DVD region code.

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx (also applies to Windows 7)

  Thank you.

• Hello! What is support for the Finland phone number or where can I find regional support numbers?

  I'm a student of Adobe Creative cloud edition. The contrast is made for a year. I have a few months left but my computer is not working correctly and I get a new title of refund from the manufacturer. My Adobe contract says I'm able to download the cloud for a single computer. So, how do I upload it to the new computer? I'm not able to find help in support pages. I would like to call the regional support, but I can't find the number of anywhere.

  Hello

  Please visit the following link to contact support by calling/chat:

  Contact the customer service

  You can change the region down to the left and get the number for all other regions.

  Kind regards

  Sheena

• Impossible to change the settings for the overlap of the midi regions

  Hi people

  Trying to change my project settings so that my midi regions overlap or merged.

  However, when I select the different options in the project settings - setting won't change even after choosing, he. All the default to replace & I can't change anything...

  Any ideas?

  1 - ability to select IMAGE options, but as soon as I click on it it goes back... (see image 2)

  

  IMAGE 2

  

  Weird. Since nobody had a suggestion again I'll propose to eliminate most bizarre factors:

  -Check the permissions to read / write to the project folder, you are working, and where the logic is in. You have full access?

  -Detach the Audio interfaces / external MIDI, reboot and external logical beginning without entries/connections

  The same problem happens for tracks Audio parameters too?

• He can't change the region of my account! Help, please! Thank you ~ ~ ~

  Hello

  I want to change my account area. But I still balance ($0.02) so I couldn't change. Please delete my balance.

  Thank you!

  and now I can not contact the Apple Support it's always show

  We're sorry.

  We are unable to respond to your request at this time. Please try again or come back later.

  1c14bb55-ED82-4B43-9c22-fc79914a022c

  is could someone please help me contact the apple support to clear my balance or help me another way to change the region on my account please!

  Thank you!!