MAR for VPN GBA 4.2 users

Similar Questions

• Limit bandwidth for VPN users

  Hi guys,.

  I use ASA Version 8.2 (1), I want to limit vpn users to use less bandwidth of my Interlink to access something on the inside of the network

  example: source vpn pool

  Destn: inside the network

  Please let me know how to achieve this with QOS config.

  Hello

  Probably the best would be to match groups of tunnel.

  class-map TG1-best-effort 

  match tunnel-group Tunnel-Group-1 

  match flow ip destination-address 

  Then this traffic in police policy-map and apply the service policy to the external interface (since you want to traffic police from your home). You can also use the pool for vpn access lists.

  For more details, please see:

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/QoS.html

• Can the NAT of ASA configuration for vpn local pool

  We have a group of tunnel remote ipsec, clients address pool use 172.18.33.0/24 which setup from command "ip local pool. The remote cliens must use full ipsec tunnel.

  Because of IP overlap or route number, we would like to NAT this local basin of 172.18.33.0 to 192.168.3.0 subnet when vpn users access certain servers or subnet via external interface of the ASA.  I have nat mapping address command from an interface to another interface of Armi. The pool local vpn is not behind any physical interface of the ASA. My question is can ASA policy NAT configuration for vpn local pool.  If so, how to set up this NAT.

  Thank you

  Haiying

  Elijah,

  NAT_VPNClients ip 172.18.33.0 access list allow 255.255.255.0 10.1.1.0 255.255.255.0

  public static 192.168.33.0 (external, outside) - NAT_VPNClients access list

  The above configuration will be NAT 172.18.33.0/24 to 192.168.33.0/24 when you go to 10.1.1.0/24 (assuming that 10.1.1.0/24 is your subnet of servers).

  To allow the ASA to redirect rewritten traffic the same interface in which he receive, you must also order:

  permit same-security-traffic intra-interface

  Federico.

• AAA for VPN - Kerberos, LDAP or an NT domain?

  All,

  After that a small return on what you think is the best method for AAA authentication for VPN clients when authenticating against a Windows domain for remote access?

  I have always used "NT Domain" because it seems to correspond roughly to the NT Auth I used to use on the old hubs. However, I (finally) decided to take a look at the Kerberos and LDAP, since they must have been added for a reason...

  Far as I can tell LDAP adds the ability to search a little more finely (basic DN) AD, but that's all. Am I missing something? Are there more reason to use LDAP or Kerberos domain auth?

  What is more reliable? That you guys use?

  See you soon!

  Either it is reliable, you can map users in different group policies or apply different DAP political, based on their belonging to a group. If you are basic authentication, then your method is still the best way to go.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Two links one for VPN Site to Site and another for internet on the same router configuration

  Hi all

  I have 2 internet links an ADSL and lease terminated on the same router. I need to configure ADSL for VPN site-to-site of HO and internet leased line dedicated for all users.

  my site IP subnet is 10.10.100.0/24 and HO subnet is 10.1.0.0/24.   Please find attached Config and advice it will be OK and works fine

  Thanks in advance...

  Mikael

  Hello

  For me, it looks like it has configured the route correctly;

  ip route 0.0.0.0 0.0.0.0 fastethernet4 -> for all traffic to the internet.

  Road 10.1.0.0 ip 255.255.255.0 Dialer1 -> for vpn traffic to HO.
  

  The public_IP_HO must be defined according to the map of encryption using the set by the peers command.

  I want to add is on the isakmp policy hash attribute, you can choose between sha/md5 or whatever available on your device. Make sure that the isakmp policy to match political isakmp of your HO.

  The other thing is the acl for the internet. You may want to consider replacing the deny statement if you want to deny traffic only to your jar currently it is said to deny all traffic 10.10.100.0 10.0.0.0 network, not to the 10.1.0.0 HO (network).

  HTH,

• Restrict VPN access some AD users?

  Is it possible to deny VPN access to specific accounts AD?

  Currently install with 5520, LDAP authentication for VPN users.

  You can use Dial-in properties of the user account and you have to match with this attribute of the user in the SAA. Configuration will look like this.

  ldap attribute-map CISCOMAP   map-name  msNPAllowDialin cVPN3000-IETF-Radius-Class   map-value msNPAllowDialin FALSE NOACCESS   map-value msNPAllowDialin TRUE ALLOWACCESS

  aaa-server LDAPGROUP protocol ldap aaa-server LDAPGROUP host 172.18.254.49 server-type microsoft ldap-attribute-map CISCOMAP

  If you select allow access to AD user attributes then user can connect vpn otherwise not.

  With respect,

  Safwan

  Remember messages useful rates

• "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  I come with a message "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  Any ideas what is happening?

  Thank you

  Hi and thanks for your time.

  The program was an application to create your own music

  I don't have any problem installing other applications programs...

  The solution was a scan with malware bytes who discovered infected with the registry data.

  So I deleted it and after running a lot on the line scans, I deleted the program, I wanted to install.

  Everything is still better then...

• Live Mail is not time on a bad/hung e-mail server connection automatically, which leaves the rest / other e-mail accounts unread for long without affecting the user.

  Live Mail is not time on a bad/hung e-mail server connection automatically, which leaves the rest / other e-mail accounts unread for long without affecting the user.
  BTW, how to force Live Mail to jump/break current hung connection without restarting the Live Mail? It does appear that a stop button, but no jump to Live Mail key control winodw?

  Hello

  1. do you use the Windows Live Mail email client?

  I recommend you ask your question on the dedicated Windows Live forums. Here is the link for the category Windows Live Mail.
  http://windowslivehelp.com/product.aspx?ProductID=15

  I hope this helps.

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• I accidentally typed my password for the account of the user to an unencrypted page

  original title: password security

  I accidentally typed my password for the account of the user to a page that is unencrypted. The response was that the username password is incorrect, so I broke down and disconnected.  I'm worried that the password has been clearly displayed, but do not know with certainty

  Hello

  Probably won't matter if you change your password.

  Hope that helps.

• I forgot the password for VPN record how I opened

  First I have to buy the phone add password for VPN and I forgot how I fix this

  You can try to perform a repair of the system as it will be your phone factory reset or below, try to perform a factory reset, but in order to achieve a system repair

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when you are prompted, always connect your phone off press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Age of Empires III has not been installed for allusers or the current user.

  I have 64-bit Windows 7 Home Premium.  AOE II runs correctly, but I can't install war chiefs expansion packs.  the "Age of Empires III has not been installed for allusers or the current user." Please sign in with the correct account. This configuration will be output. "error still appears.  How can I make it work?

  Create the directory here: -.

  C:\ProgramData\Microsoft\Windows\Start start\program

  So after you have created the files, it should look like:-

  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\ Microsoft Age of Empires III

  If this post answers your question, click mark as answer .

• ASA - several IPS for VPN

  I'll put up Anyconnect to replace our customers of Cisco IPsec VPN, since it is end of life. A part of the process is to get an SSL certificate and a FULL domain name to use for this. I've got that and it is applied to the ASA very well. Now we don't get these warnings to the subject it is not not sure and such.

  The problem is that we use a non-standard port for the SSL VPN from 443 is already sent to an internal device. I have unused public addresses to the external interface of the ASA, but I don't know how I could use them. I would like to have a different IP address for SSL VPN, so I don't have to mess with the port forward that is currently in place. I read on proxy arp, but that looks like it could be a problem. I could have someone connect another cable to a different interface on the ASA (5512-X) and assign this static interface I want for the VPN, but I'm not sure it will work well. We have connections VPN site to site in place as well. Can I have the ASA listening on two different interfaces at the same time?

  Recap:

  IP 1 - address primary NAT, Site at tunnels put end here, some Cisco IPsec VPN terminate customer

  IP 2 - want to have all customers of Anyconnect connect here, to migrate all legacy Cissco IPsec clients until they are all over Anyconnect.

  Key is that I can not stop listening on IP 1 for site-to-site connections.

  Thoughts?

  Thank you!

  On the SAA, you cannot use the additional IPS for VPN.

  If tcp/443 is already used for an external server, then I would reconfigure the DNS entry for it to use the second IP address that must be sent to the internal server. You can then use the IP interface of the ASA for AnyConnect.

• ASA for vpn only

  Hello

  I would like to configure the ASA for vpn only. By default, ASA allows traffic from the interface of high security to low security interface. I want to stop it. Is it possible to do without resorting to access lists.

  Thank you

  John

  Define interfaces for the same level of security and make sure that you do not have same-security-traffic permits inter-interface enabled.
  

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807fc191.shtml

  Hope that helps.