Material interruptions and DPC / after XP - SP3 install

Similar Questions

• Material interruptions and DPC using 20 to 30% of the CPU?

  I have an Intel DZ68BC feet bar Windows 7 Ultimate 64-bit with 16 GB of RAM and an Intel Core processor i5-2500 @ 3.3 GHz overclocked to 3.8 GHz. I have a problem with the hardware interrupts and DPCS. No matter what I do on my computer, after I start it up, and it has been slowed down for half an hour or more, interruptions starts with about 20-30% of my processing power. Whenever it stings my music in Windows Media Player skips and jumps a lot. Does anyone have any ideas as to what may cause these spikes.

  P. S. I have all my drivers and updates to installed Windows.

  Thank you
  Nathan

  I checked with precess Explorer and found a few USB hub root abnormal but I disble and so good (my computer hp compaq dc7800)

  

  

• problem with the firewall/ics service after xp sp3 installed (internet connection sharing)

  a humming with no problem.  recently purchased office 2010 and, if necessary, to upgrade to xp sp3 to install.  SP3 installed, now unable to connect.  can not turn on the windows firewall.

  When I try to activate the windows firewall I get the following message:

  Windows cannot start the windows firewall/internet connection (ICS) sharing service

  read some other solutions, but some seem to be beyond my skill level and/or are related to an sp2 update.  wanted to know if there is a more current solution.  any help much appreciated.

  I'll take the issue here then.

  Install, upgrade and activate Forum
  http://social.answers.Microsoft.com/forums/en-us/XPInstall/threads

  I don't know what causes your problem. Sorry, joc512.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• PS2 Keyboard and mouse hooked after XP SP3 installed

  Upgrade to SP3.  Keyboard works very well to get into the BIOS.  F8 works very well to get to choose the Safe Mode, and al. or not.  Once XP takes control, the keyboard and mouse are unresponsive.  Mouse move the pointer on the screen, the keyboard will not activate numlock or other keys LED.  Power - off only option.  Tried other keyboards and other mouse.  No go.

  Any ideas?  Perfect condition ' puter til SP3!

  I said nothing about "of special drivers', I suggested seeking & install the updated drivers. If none is available, there is a very good chance that your older equipment of keyboard and mouse is not supported in WinXP SP3.

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost U.S.$ 59 or by higher incident now.

  OT: Unlike focus groups, we can't crosspost in these forums, we can only multipost.

  Multiposting vs Crossposting
  http://www.blakjak.demon.co.UK/mul_crss.htm

  Despite what you see in this forum URL or at the top of the forum page, Windows Update forum is not a forum specific to Vista or Win7. We deal here with WinXP, Vista & Win7. [What were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite A210 - 127 (PSAELE) cut off and BSOD after the fresh install of Win 7

  Hello Toshiba Support Forums.

  I installed Windows 7 Ultimate x32bit 2 weeks ago and I have problems around him.
  The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  The problem is sometimes the laptop shutsdown itself and after I turn it back on it says blue screen and some other information you need, but I closed it.

  Also im gamer and sometimes when I play the game it shutsdown again. When I use Google Chrome or Firefox, the browser hangs and makes the pc of the room with her for at least 10 min. it is really bad and I also want to set.

  Also, I want to ask about memory card reader because I insert a card in the reader, but it does not work I think I need a driver for it but is not in the drivers Toshiba Web page.

  Thank you very much!
  If you need any other information that I will deliver to you order for ifx these annoying problems!

  > The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  Where did you find this ATi driver?
  It could be possible that the installation of this driver ATi the BSOD.

  My girlfriend has the same laptop Satellite A210 with an ATI Mobility Radeon HD 2400 graphics card. The driver version is 8.632.1.2000 and the laptop is preinstalled with Win 7

  It works perfectly without any BSOD.

  By the way: the cardreder works too... you could take a Vista driver or the driver put the A300 series too

• Lost PowerDVD and WinTV after fresh re - install (no recovery disc)

  Hello world

  I bought my new HP Envy H8-1485ea desktop PC yesterday and try to get rid of the "bloatware" and unnecessary software, that I reformatted with my own license of Windows 8 Professional.

  Now the problem is of course that I lost everything that I need to use the TV tuner and a Bluray player!

  Anyone happen to know if I can download the separately packaged software? PowerDVD alone will cost me £35 and I can't imagine what would have cost WinTV!

  For any help or suggestion would be greatly appreciated.

  Thanks in advance

  

  Hi, just thought I'd post an update after my visit to the PC world.

  Fortunately, the store manager I recognized as the person who bought the PC £1000 the day before and allowed me to copy the installation of the C drive files, the display model!

  I have now a functioning map TV/Tuner, Blu - Ray player and remote control!

  Could not be more pleased with the help I got and understand how they were considering that it was my fault, that I was in the situation in the first place.

  Thanks for your suggestions, if

• unknown material interruptions & DPC causing high CPU usage

  After having hard time find a way to solve this problem

  Please take a look at these links

  http://postimg.org/image/ynx7o0gi1/

  http://postimg.org/image/j3ptxh6dl/

  Thanks for all the entries...

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. the computer is on a domain network?
   
  These activities [interruptions and DPC] high CPU consumption may indicate a hardware problem or problems with the device driver.
   
  Method 1:
  I suggest you to update the chipset and BIOS drivers on the computer and check if it helps.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Also, try to download and install the latest chipset and BIOS drivers for the computer from the manufacturer's website.
   
  Method 2:
  I ask you to check if the problem persists after disconnecting all external devices (except keyboard and mouse).

   

  Method 3:

  Run the hardware troubleshooter and devices.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  Check if the problem occurs in the boot.

  Reference:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

   
  Also check out these links for more information:
   
  Analyzing interrupt and DPC activity
  http://TechNet.Microsoft.com/en-us/library/cc938646.aspx
   
  Follow-up of interruptions
  http://TechNet.Microsoft.com/en-us/library/cc940374.aspx
   
  Start followed by performance guide
  http://TechNet.Microsoft.com/en-us/library/dd744567 (v = ws.10) .aspx
   
  Thank you.

• Firefox crashes even after a clean install of Windows

  Hey!

  My Firefox keeps crashing. It starts up ok, but still crashes shortly after. I do not see a pattern in accidents, it seems random. Strange thing is that I had this problem before with Win7 and now he persists after installation clean full of Win10. The two hard drives formatted, no old files or anything left... It crashes in safe mode, too. On Win7, I could get locked out of the browser. Sometimes he would start crashing whenever I started the browser. A reboot has allowed me to once again successfully launch Firefox, but it would soon break without worrying. He crashed on the clean install of Firefox and crashed after that I installed Adobe Flash.

  The crash began perhaps a few days previously, I think not that a lot of it initially. Now, however, it drives me nuts; It is basically impossible to navigate. Firefox browser my go-to for years and I would rather go to another.

  Here are a few crash reports: 4b05df7c-24d3-49e3-a13f-c9d57aca3cf0 bp-775561fc-4d6c-48a5-8c6b-e3af42161108 43d377a7-ea92-4c37-b717-84a562cd2d36 bp-09b21c04-8640-44ed-a261-a98f12161108 bp-9726e46d-d041-4fba-b905-f92682161108 fb6d8a28-79c6-4cab-b4c1-096778ca49e8

  You will appreciate all help to the problem.

  Seems that the problem is solved by itself. Not a single accident today. I don't have any idea of that which could have fixed, or what caused it in the first place. Curious, but no matter, I'm a happy camper now. I wish all support forums it was effective.

• Calls excessive deferred Procedurwe (CPD) & material interruptions after installing Win 7 (64-bit)

  After a clean install of Windows 7 Ultimate, I've had a pretty big problem. Whenever I try to transfer or backup files to a portable HD USB device only a few files are transferred and the CPU load then engulfs the system (85-92%) with hardware and procedure calls deferred (DPC) of the interruptions as shown by Process Explorer. Stop the backup/transfer or disconnect drives is not good - the use of the processor runs at a constant of 70-90%. Only a reboot gets rid of the problem. Here are the relevant facts and things I did to find the problem:

  (1) I used three external HD drives, a HP Personal Media 1 TB and a hard WD 500 GB and a 1 TB IOMEGA. I tried all 3 external HDs on alternating ports USB - same problem.

  (2) all discs worked perfectly before on my Vista-64 (PC) system and both drives work fine on both my other XP systems.

  (3) my system is a HP Pavilion PC m9517c with a processor 2.3 ghz Quad-core, 8 GB of memory and a 1 TB HD, so the processing power is not the problem.

  (4) I have tried the same transfer after a clean boot with all disabled menu items and services - same problem start.

  (5) in Device Manager for each disk under the policies tab, I also spent the default selection of "Rapid withdrawal", which disables the cache to "best performance" that allows to write cache (it could be a problem of write caching since it will transfer a few files before it grinds almost to the stop of thought)-same problem writing.

  It seems e problem a Win 7. Can anyone give me any help would be appreciated. HP has been less useful for their support and knowledge.

  Problem solved! Thanks CharlesHP (graduate student). I spent a week on & off with HP support, both on the phone and by e-mail. They did not come close to understanding or solve the problem and you resolved easily. It took only the Microsoft hotfix that you me bound. Thanks again.

• After that the installation of first elements of dvd with the series nr.install 11 is interrupted and uninstalled

  After that installation first elements 11 DVD with the nr.install series is interrupted and uninstalled. What should do?

  Troubleshoot installation, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements-premiere.html

• Last download of Norton Security seen cloud 9 virus issue after downloading Firefox opens not said 'cannot find runtime", removed and reinstall XP Pro SP3 work

  Running Firefox 36.0.1 an update has been downloaded on 3.19.2015.
  Norton said that this is a problem of cloud 9. Subsequently tried to open Firefox,
  but instead of opening, I received an error "can't find execution". "."
  Deleted Firefox of installed programs, news and everything works great.
  2 days later received an update downloaded and exactly the same thing happened.
  After removed again, installed new with 36.0.3 and everything works fine again.
  I use Win XP Pro SP3

  It's a problem with Norton and not the Firefox browser with Norton of Suspicious.Cloud claim

  She did this false positive Suspicious.Cloud with SeaMonkey for years every so often releases SM and Norton did not bother to fix it. Norton antivirus would claim a virus found in file freebl3.dll only there is not and never has been.

  You have to be such a regular occurrence that they still singling out Norton in the known issues for SeaMonkey version notes for a few years as can be seen in http://www.seamonkey-project.org/releases/seamonkey2.33/#issues and appears until Norton finally fix it.

  Messages on the claim of Suspicious.cloud with Firefox here (and mozillaZine) were infrequent compared to SeaMonkey.

• Pavilion a1647c bsod after sp3 install

  Hi, system of maintains reboot after bsod just installed sp3 and renamed intelppm.sys. now, I can't even on safe mode or recovery console. tried to boot the xp disc and on the repair system, it will not show the partition c. help

  Tom

  Try to move the HARD disk to another system and rename the file, and then bring it back to your system, but try to start safe mode

• the screen is huge, after a clean install of XP and IE crashes after opening

  Hello. I hope someone can help. I had a nasty virus my virus program has not detected in time. After that that he has been detected and deleted my computer did not work well. the virus program had deleted some files from XP to base when he got rid of the virus. I tried to repair windows with the XP cd, but my HARD drive freeze. Well I ended up getting a new HARD drive and I full format before installing windows xp. XP installed fine and I then progressed in the installation of all the drivers that came with my computer, when it was new, which was about 15 CD. Well now, I have more problems. my screen is HUGE and I am unable to change the screen meanless and IE crashes after opening. until I reinstalled windows, I took my wireless card and reinstalled after installing windows. It shows that I have a good internet connection, but it still crashes. can anyone help. my XP cd has SP2 on it.

  You want to get your computer up to date. You can get SP3 from here and there are more than 100 + updates after the SP.

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  I hope this helps.

• I have windows XP SP2 and when I try to install SP3, the current installation stops the computer stops.

  I was recently given an older laptop. I have windows XP Home Edition SP2. When I try to update windows, update web site scans my pc and says I need to install SP3 to update other windows. It downloads, but it starts to install, at Midway, the PC shuts down. When I power backup, windows starts to load, but discounts can go back every time. Only way I can get windows to work again is to join the conservation program and windows restore to before sp3 install atemp. I discovered that I need to install microsoft .net framework 2.0 SP2, but as it tries to install it, it stops and gives me an error code 1601. What is the problem and what can do to reslove? I don't know any history of what has been done until I got it. I know it works, but without SP3 and needs updated to work correctly. What can I do?

  Hello Chris3535,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it seems that you are having problems with Windows XP Service Pack 3. As I understand it, you cannot install Windows XP Service Pack 3.

  Step 1: check first pre - it not to install Windows XP Service Pack 3

  Steps to take before you install Windows XP Service Pack 3

  Step 2: Perform the steps in the link and check.

  You cannot install updates after a repair of Windows XP or after Windows XP SP3 is installed immediately after a new installation of Windows XP SP2

  Meet us if you encounter any problems during the Installation of Windows XP SP3.  or any other matter of Windows and I would be happy to help you.

  Good day!

  Hope this information helps.

• win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102

  win xp sp3 restart after trying to install edimax ps-1216u for printer laserjet p1102
  I have the printer installed that tried to install edimax ps-1216u and when it tries to install the printer, the computer restarts

  Problem solved! I have disabled smart installation with SIUttility for this computer. I have manually installed the printer by adding the port tcp/ip standard and all is ok now.