Matshita dvd/BD on XPS 15 only able to read discs from region of origin

Similar Questions

• Matshita DVD RAM UJ850s ATA optical drive will not read burned media, running Vista

  * original title - CD/DVD unit read not "burned" cd *.

  Hi, there are about 6 weeks, I had to do a recovery because a virus in my PC, the problem is that now the optical unit reads no CD, it reads 'original' CD, DVD (original and burned) but not burned CD specially those who have programs on them, could be a driver problem, but so far I have not been able to solve the problem , and I m not sure the original driver are in Sony's site, or any other Web site.

  PS the thing Burns CD and they can be read after that that they were "closed".

  I have a VAIO VGN-N330FH, running Vista Home Basic 32 bit (Spanish), the model is a Matshita DVD RAM UJ850s ATA Device.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Latitude D610 - able to read discs, but cannot burn

  I have a laptop Latitude D610 I use for business purposes.  Once a month I have to burn word and Excel files on a disc to send to our customer.  Last month I went to burn and the drive is no longer burning the files to a blank disc.  I tried several discs, I also tried to reinstall the drive.  Today, I replaced the drive with a laptop replacement, we have on-site.  I'm still not able to burn.  Most of the time it will not detect a disk if the disk is empty.  Discs with the media are read without any problem.  Any ideas?  I want to get this working so I can't keep my boss for burning the computer loan.

  Latitude D610

  Windows XP

  CD-RW/DVD-ROM Dell Part #8W007-A01 (supplied with the machine)

  Managers of device says its working properly

  When I click on the drive with an empty disc, I get the message next - D:\ is not accessible. incorrect function.

  All other discs with media work very well.

  Message edited by cgillen on 03/26/2008 09:28
  
  

• You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs

  You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive.  able to read other DVDs

  Hi, Virgil,.

  1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?

  2. you receive messages or error codes when you try to format the drive?

  You can check if you are able to format the DVD in another computer.

  You can also read the following article and check:

  Format a CD or DVD

• UTL_FILE.get_line not able to read large files...

  Dear all,

  UTL_FILE.get_line is not able to read data from file. can you suggest me to fix this problem...

  Here is my code;

  declare

  l_file_handle UTL_FILE. Type_de_fichier;

  l_input_line varchar2 (6000);

  Start

  l_file_name: = 'abc.csv ';

  l_path: = ' / u02/R12UAT/apps/apps_st/appl/XXSES/12.0.0/bin';

  l_file_handle: = UTL_FILE. FOPEN (l_path, l_file_name, 'R', 32767);

  loop

  UTL_FILE. GET_LINE (l_input_file, l_input_line);

  fnd_file.put_line (fnd_file.log, l_input_line);

  end loop;

  UTL_FILE.fclose (l_file_handle);

  end;

  After reading a few lines I have a get the error;

  ORA-06502: PL/SQL: digital or value error: character string buffer too small

  I have to read data from file with UTL_FILE. Do not use SQLLDR

  Thank you.

  Kind regards

  Ravi.

  Your call to FOPEN() function specifies a size of 32K maximum line. When you call GET_LINE() without specifying the number of characters to get, Oracle will therefore assume you want to get 32K characters. However, your stamp, L_INPUT_LINE, is defined as VARCHAR2 (6000). That is, it is much too small.

  The solution is to call GET_LINE() with the third parameter set to 6000.

  BTW, you can also set a condition of release on the loop.

• driver MATSHITA dvd - ram UJ890AS

  the computer no longer sees my burner MATSHITA dvd - ram UJ890AS player? Thank you

  Hi alaincalvi,

  Microsoft Answers is only able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

  Hope the helps of information.

• supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

  Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

  Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

  I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

  I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

  I tried the registry filter entries delete and it does not correct.

  The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

  DVD with files on them are not read.

  I cleaned the drive with a DVD-rom cleaner.

  Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

  Combustion works very well.

  Hey, Arch.

  I suggest uninstalling the drive in Device Manager and restart the computer.

  If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

  The Powershell do not install cannot be bound.

  I suggest to run a full system scan after you have updated the antivirus definitions.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver for Matshita DVD-RAM UJ880AS Vista does not refresh

  DVD does not, the driver updates

  Matshita DVD-RAM UJ880AS

  Toshiba Satellite A500, Windows Vista

  The DVD will be able to, but it won't play.  Device Manager says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  the button "Check for solutions" does not solve the problem

  Tried to update the drivers, but it says I have the most up to date.

  Microsoft fix - it didn't resolve the problem, or the other.

  What's next?

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Windos Vista no reconoce unidad MATSHITA DVD-RAM UJ-850 s ATA DEVICE

  MATSHITA DVD-RAM UJ-850 S ATA DEVICE

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner

• Driver MATSHITA DVD-RAM UJ8E1 error

  I have a brand new Acer Aspire 571 Windows V3 8 & the first time I tried to use the DVD player, to rip a CD, nothing happens. I checked the devices & printers in the control panel and the device 'Aspire' shows a yellow triangular exclamation point (need to troubleshooting and status driver error). I troubleshoot the device & advises I reinstall when I apply this fix all I get is found problem MATSHITA DVD-RAM UJ8E1 has a driver problem. Not fixed.

  I have had only the laptop for a few days & have spent a lot of time to transfer & sorting my library top via an external drive, so I am reluctant to take it back to the retailer. I had much rather fix the drive but need help!
  Thank you in advance, a forum user first.
   
  [Moved from comments]

  Hi Delphine,.

  Try to remove the entry from Pfc that relates to the pfc.sys.

  To remove Pfc input double click LowerFilters and under value data, remove Pfc > OK

  Create a system restore point beforehand and restart the computer after.

• Driver Matshita DVD Ram UJ8B0AW

  My machine: ASUS A43S i5 (bought in August 2012)
  Original OS: Windows 7 (now upgraded to Windows 8)
  Problem:
  (1) after upgrading my DVD does not work
  (2) is unable to read any kind of CD/DVD software or audio videos
  (3) cannot even see the device in Windows Explorer
  (4) if I insert a disc in the DVD it drive will only spin for a few seconds and stop
  (5) ran all the tests available diagnostic built inside Windows 8 as reinstall, hardware test, trouble shoot, fix auto, bah bah bah. Tried every thing as available as possible AND MY PROBLEM WAS NOT FIXED. I tried everything already!

  He said only "Matshita DVD Ram UJ8B0AW has a driver problem" and that it has NOT been FIXED.

  I downloaded the latest driver from ASUS and Matshita and reinstalled manually and it is still DO NOT SET

  Even though I can start from ground zero and reinstall using F12 initially upwards and insert a window 7 or 8 disk, I fear my DVD will not move and cannot reinstall Windows no matter what.

  What can I do?

  Try to remove the GEARAspiWDM entry.

  To remove the GEARAspiWDM entry double-click UpperFilters and, under value data, delete GEARAspiWDM > OK

  Create a system restore point beforehand and restart the computer after.

  However, if you have an application that uses the GEARAspiWDM, like iTunes, just install the latest version of hardware drivers (4.020.5) and that no changes to the registry:

  http://www.GearSoftware.com/support/drivers.php

  Updated speed drivers should also correct the mistake.

• Average cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  My medium in cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Only able to connect to the internet on behalf of the 1 user now

  Since this morning, we are only able to connect to internet from 1 account. It is not the main account. The primary user is unable to get a connection

  Please explain further, are you connected via wifi? or is it a hard link? are these local accounts on the computer or domain accounts?

• Vista does not open a cd/dvd using MATSHITA DVD-RAM UJ-850 s ATA Device

  my laptop has a MATSHITA DVD-RAM UJ-850 s ATA Device. but it does not open a cd/dvd. Why?

  Hello

  1 recently, you did changes to the computer?
  
  Method 1. Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  e. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
  After the computer restarts, the drivers will be installed automatically.

  Method 2. The firmware was updated.
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

  I hope this helps.

• Hi, my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work

  Even I am facing the same problem.

  I have a lenovo y410 laptop. my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work... it is not reading all discs... not to burn all...

  When the problem occurred I immediately called the customer... but as the phones warranty period I can replaced also do it... Please help me with a solution...

  This is what happens when I insert a disc in the drive... the led flashes for a few seconds... the disc seems to move but then the led stops blinking and nothing happens...

  I have tried both what is the necessary changes in the REGISTRY & also uninstalled the software and restarted my laptop. But the problem is still there.

  Please let know me of any other way to solve this problem

  Hello
  
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.