memory 8 GB envy13 1050ef module

Similar Questions

• Possibility to upgrade memory R710 with 16 GB module

  Hi, I need help for upgrade with the module of 16 GB for my R710

  My R710 is already filled with memory module 32 GB of config (G484D) - DUAL IN - LINE MEMORY MODULE..., 4 G, 1066, 2RX4X72, 8, 240, REGULATION

  I can improve it with (A5008568) - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV below optimizer mode configuration? Please suggest.

  In this way with this 16 GB modules if I be mixed with module 4 GB 1066 mhz previous cumulative total memory perfomance down to 1066 mhz? logic which is not suggested

  DIMM_BANK_A_SLOT_1 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_2 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_3-
   
  DIMM_BANK_A_SLOT_4 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_5 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_A_SLOT_6-
   
  DIMM_BANK_A_SLOT_7-
   
  DIMM_BANK_A_SLOT_8
   
  DIMM_BANK_A_SLOT_9
   
   
   
   
   
  DIMM_BANK_B_SLOT_1 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_2 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_3-
   
  DIMM_BANK_B_SLOT_4 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_5 - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV
   
  DIMM_BANK_B_SLOT_6-
   
  DIMM_BANK_B_SLOT_7-
   
  DIMM_BANK_B_SLOT_8
   
  DIMM_BANK_B_SLOT_9

  Utpal1

  I propose to upgrade all R710 with (A5008568) - 16GB 2Rx4 RDIMMS ECC 1333 MHz LV... Certainly, I hope that it will work well with my server with processors E5520 and would also work with existing (G484D) - MEMORY MODULE... 4G, 1066, 2RX4X72

  It should work with the 4 GB DIMMs in 7/8. I edited a couple of my posts to clarify certain limits with the rank of quad DIMMS and the CPU 1.35v. I added two notes stating that grade quad DIMMS will operate at 800 MHz when filled 2 per channel, and 1066 MHz speed limitation for the CPU 1.35v to apply the dual rank DIMMS or higher when filled with a minimum of 2 per channel. As part of our conversation I do not think that it you confused, but I wanted to clarify information for future readers.

  Let us know if there are problems with the upgrade.

  Thank you

• Error memory in the construction of modules with Module

  OPA dear developers,

  Need your help around one of the new features of 10.4 OPA's Modules.

  I have two rulebases A and B.  While the modules A, I would like to be able to determine the results of the policies written in modules B.  So I created a module off B modules (select Build Module), has opened the project to the modules A and connected the output B modules in modules A .rmod (folder Modules > add a Module link..)

  When I try to debug without screens, construction is successful and I am able to investigate the rules in here B modules.  However, when I debug with screens, build and run for CONTROLLED substances, or build and run in OWD, they all prompt a strace pile on the screen.  The cause of the exception is a "means: Java heap space".

  If I build separately these rulebases, it works very well and no errors.  It happens when one becomes the other module.  How this error memory can be fixed?  I paste the entire error message below in the hope of helping the investigation.  (Sorry for the long text..)

  Any help to make this work is appreciated.  Thank you!

  HTTP status 500

  exception

  1. javax.servlet.ServletException: Servlet.init () for servlet WebDeterminationsServlet threw the exception

  org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)

  org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)

  org. Apache.Coyote.http11.Http11Processor.Process (Http11Processor.Java:879)

  org. Apache.Coyote.http11.Http11BaseProtocol$ Http11ConnectionHandler.processConnection (Http11BaseProtocol.Java:665)

  org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)

  org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)

  org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:689)

  java.lang.Thread.run (unknown Source)

  first cause

  1. means: Java heap space

  org.apache.xerces.dom.DeferredDocumentImpl.getNodeObject (unknown Source)

  org.apache.xerces.dom.DeferredElementNSImpl.synchronizeData (unknown Source)

  org.apache.xerces.dom.ElementNSImpl.getNamespaceURI (unknown Source)

  org. Apache.Xml.DTM.Ref.dom2dtm.DOM2DTM.AddNode (DOM2DTM. Java:262)

  org. Apache.Xml.DTM.Ref.dom2dtm.DOM2DTM.nextNode (DOM2DTM. Java:523)

  org.apache.xml.dtm.ref.DTMDefaultBase._nextsib(DTMDefaultBase.java:565)

  org.apache.xml.dtm.ref.DTMDefaultBase.getNextSibling(DTMDefaultBase.java:1142)

  org.apache.xml.dtm.ref.DTMDefaultBaseTraversers$ ChildTraverser.next (DTMDefaultBaseTraversers.java:463)

  org.apache.xpath.axes.ChildTestIterator.getNextNode(ChildTestIterator.java:83)

  org.apache.xpath.axes.BasicTestIterator.nextNode(BasicTestIterator.java:170)

  org.apache.xpath.axes.NodeSequence.nextNode(NodeSequence.java:335)

  org.apache.xpath.axes.NodeSequence.runTo(NodeSequence.java:494)

  org.apache.xml.dtm.ref.DTMNodeList. < init > (DTMNodeList.java:81)

  org.apache.xpath.objects.XNodeSet.nodelist(XNodeSet.java:346)

  org.apache.xpath.jaxp.XPathImpl.getResultAsType(XPathImpl.java:329)

  org.apache.xpath.jaxp.XPathImpl.evaluate(XPathImpl.java:282)

  com.oracle.determinations.util.xml.dom.XmlElement.selectElements(XmlElement.java:89)

  com.oracle.determinations.util.xml.dom.XmlElement.selectElements(XmlElement.java:81)

  com.oracle.determinations.engine.local.modules.Module.loadDataModel(Module.java:295)

  com.oracle.determinations.engine.local.modules.Module. < init > (Module.java:56)

  com.oracle.determinations.engine.local.modules.ModuleLoader.loadChildModules(ModuleLoader.java:72)

  com.oracle.determinations.engine.local.modules.ModuleLoader.loadModules(ModuleLoader.java:56)

  com.oracle.determinations.engine.local.modules.ModuleLoader.createUnifiedRulebase(ModuleLoader.java:31)

  com.oracle.determinations.engine.local.RulebaseLoader.createUnifiedRulebase(RulebaseLoader.java:141)

  com.oracle.determinations.interview.engine.local.LocalRulebaseService.applyChangeSet(LocalRulebaseService.java:243)

  com.oracle.determinations.interview.engine.plugins.rulebaseresolver.ClassloaderRulebaseResolverPlugin.initialise(ClassloaderRulebaseResolverPlugin.java:73)

  com.oracle.determinations.interview.engine.local.LocalRulebaseService. < init > (LocalRulebaseService.java:53)

  com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:181)

  com.oracle.determinations.interview.engine.local.LocalInterviewEngine. < init > (LocalInterviewEngine.java:66)

  com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19)

  com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext.init(WebDeterminationsServletContext.java:180)

  com.oracle.determinations.web.platform.servlet.WebDeterminationsServletContext. < init > (WebDeterminationsServletContext.java:116)

  Hello

  You can increase the size of the segment for the built-in Tomcat server.

  In OPM, go to tools > Options > Embedded Server, you should see under "Server Properties":

  -Xms200m-Xmx200m - Ddeploy.enabled = true

  You can just up the memory of something like:

  -Xms512m-Xmx512m - Ddeploy.enabled = true

  I normally encountered this in rulebases with many alleged (and deducted from the instances) relationships / aliasing / scope of operators etc... You can try your performance rules ensuring that the common logic is grouped in a single intermediate attribute rather than explicitly used each time.

  I don't know if it's the 'official' line but this has worked for me in the past.

  Thank you

  Ben

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Satellite A200-1FL - how to choose compatible Kingston memory modul

  I want to upgrade my laptop Satellite A200-1FL to 4 GB of RAM.
  Now, he has two modules, each 1 GB 667 MHz.

  I read that memory modules Kingston are not suitable for computers laptop toshiba. Is there any table
  to match a computer model toshiba laptop specific to a specific module of kingston?

  I know, there are a few parameters to be taken into consideration, as frecquency 667 MHz or 800 Mhz, CL4 CL5 or CL6...

  Thank you for all the advice

  Hello

  You should buy a DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules:

  Usually he s not what module manufacturer, it is of importance, but Kingston modules are ok.
  I upgraded my laptop's memory and used the Kingston modules too

  I got m

• Operations of memory by a second different partition on 2 x Qosmio F60?

  My brother and I bought the same machine from the same store on the same day...

  Qosmio F60 PQF65A-032002.
  Windows for the CPU, graphics and disk partitions are exactly the same, but for some reason any memory scores are different!

  The operations of memory per second on my F60 is 5.9
  The operations of memory per second on his F60 is 6.1

  Anyone know what would cause this?
  Hard drive performance are the lowest score, but at least it's good on both our F60 ;-)

  I'm not sure that 0.2 is in performance, but I think replace all memory, so I can go from 4g to 8g in any case...

  Hello

  First of all the difference is very, very low only 0.2 points.
  This can be caused by using or in different loading applications and background processes.
  More there is always a difference in modules of memory product even if the modules are to come from the same manufacturer and support the same specifications.

  So there s nothing unusual.

  Welcome them

• Memory for the Satellite 2400-103

  My laptop satellite has 256 RAM, can I upgrade to 1 GB of Ram, or only 512?
  103-model Satellite S2400!
  A Finn

  Buddy so I found this memory module information page:

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6810&ft=m&St=3

  According to this page, you can switch to max 512 MB.
  The PC2100 200-Pin memory (266 MHz) DDR SODIMM module is compatible and work.

• Portege 3490 T memory upgrade

  Any ideas on how/where to buy on-line in Europe (preference to Germany or the United Kingdom) the memory for the 3490 128RAM module? Also any ideas on good and cheap components for internet connection to wide band for the laptop above?
  Thank you

  Hello

  Check it please this page http://www.orcalogic.co.uk/asp/memoryfinder.asp?pt_id=5302&ft=m&st=2
  I hope you can find a good memory for your device.

  I think the best wireless solution is with PCMCIA WLAN card.

• How to insert new Modules of RAM in Tecra M7

  Hello
  I use a Tecra M7 with 2 GB of RAM installed. Because of my work, I need more than that and bought 2 new Modules RAM 2 GB each.
  But trying to open the back of the M7 I have not found a place where I could access the old RAM Modules and replace. Does anyone have a Description or a photo where I open the M7 to replace RAM modules?

  Andreas

  I can give you a little tutorial how to change the modules:

  Remove the cover of the keyboard on the top of the keyboard (taking a screwdriver flat-blade and gently enter), then remove the 2 screws and remove the keyboard. You can disconnect the keyboard by releasing little support on the keyboard port. But BE GENTLY, brokes stuff too fast. ;)

  Then remove the cover of the memory (only 2 screws :) between you and the memory locations) and replace the modules. After exchanging just do the same as I've described, but backwards. : D

  Good luck

• Question on the addition of memory to Satellite A40

  Hi people, have 40 I want to upgrade the memory to 256 to 1024. 2 questions,

  1. where is stuck memory? Toshiba say under the lower panel (rear of) fan, I looked here and there are 3 copper pipes it... which I won't remove the chance.

  2 (assuming I can find the memory slots) which is best modules of 2 X 512 or 1 X 1024 Module?

  Grateful for any help.

  Hello

  This computer is fitted with modules supports memory of towing under the keyboard.
  You can increase the amount of RAM by installing an extra memory modules as

  PC2100 512 MB (PA3164U - 1 M 51)
  PC2100 1 GB (PA3278U-1M1G)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  I would have preferred a 1 GB module
  To install memory, the laptop should be stopped and all the cables and battery should be removed.
  Insert your fingernail or a thin object under the edge of the brace of keyboard and lift the brace. Remove the two screws fixing the keyboard and a screws of the metal structure.
  Then, you will be able to remove the keyboard.
  But be careful.
  The full description will be published in the user's manual in Chapter 8 under memory

• Equium A60-155: a few questions about the memory

  Heya everybody,

  I recently studied an upgrade of memory see Soulseek cause BSOD on my machine because of that I think it's "not enough memory". I have 256 MB ddr (64 of which goes to the graphics card which is a pain) aboard and I know I have 1.2 GB on board senior. My questions are:

  1. how many slots memory are there on the motherboard?

  2 if I wanted to buy a memory chip that is should I choose; 184 pins or 200 pins? I could not know that one is my chip of 256.

  3. I found a few sellers on ebay who sell 1 GB chips (pc2700 200 pins), a chip of the United States won't work on my laptop without any problem of "tension"?

  Thanks in advance

  Mirko

  Hello

  I found the info on your device:

  -upgrade that a location is available
  -l' device can handle with max 1280MB
  -module of memory is PC2100 DDR - RAM
  -module 1 GB compatible is 1024Mo PC2700 (PA3313U-1M1G)

  Good bye

• Satellite Pro P200 - parity memory error

  Hi all

  Sometimes, I get the following error message when I start my computer laptop http://www.geocities.com/atesfaye/Mar08_0001.jpg

  It's a Satellite Pro P200 with 2 x 1 GB RAM modules. I ran memtest on the memory installed together and individual modules. The results of the test came with no error. To read the different forums of discussion, some suggest that this error message may relate to graphics memory! Is there a way to test the graphics memory?

  Any help much appreciated!

  Can you tell us when this problem started?
  A has started after the upgrade RAM or other activity?

• extension of memory 128 to 3440CT necessary

  Hi, I need an extension of 128memory for my CT Portege 3440.
  Toshiba Italia have nobody.
  I'm looking for a used memory or also were not module.
  Who help me?
  Memory series: PA3034U-1 M 12
  Thanks Fabrizio

  Hi Fabrizio

  In my opinion, you can check on the net if there is possibility to buy it from another country. It this case you have to pay a little more to send but you will have original part for your device. Google all over the place. I found several suppliers where you can order this memory module.

  See also this page http://shopping.kelkoo.it/b/a/ss_memoria_per_toshiba_portege_3440.html. Maybe he can help you.

• What types of memory are supported on Tecra A4

  Can someone tell me the types of memory supported by the Tecra A4 PTA40 model?

  Thank you

  Tecra A4 supports PC2700 200 pin memory (333 Mhz) DDR SODIMM modules.
  Please see this link:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11719&ft=m&St=3

• Upgrade memory Tecra A7

  I notice any performance gain (in WinXP Pro) if I put the sticks of DDR2-667 memory instead of DDR2-533 modules standard in my Tecra A7-202? I've already upgraded memory in my notebook from 512 MB to 1 GB (I added the second module of 512 MB - DDR2-533), but now I am considering upgrading to 2x1GB, possibly in DDR2-667.

  Hello

  Are you sure that the DDR2-667 memory modules are compatible?
  To my knowledge the Tecra A7 supports only DDR2-533 modules.
  These are 200-pin SODIMM DDR2 PC2-4200, CL = 4, NON - ECC, DDR2-533 modules

  But to tell the truth I put t think you will feel a performance increase with the help of the DDR2-667 modules.