Motherboard question: upgrading Vostro 1500 T5270 with T7500 CPU

Similar Questions

• HP470 for Vostro 1500 wireless why it will work

  Try using a HP470 with wireless card and a Vostro 1500 laptop with a wireless card running on XP
  

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I suggest you to check if the Wireless Zero Configuration (WZC) service is set to automatic in the Services.msc. Follow the steps mentioned below.

  a. Click Start, click Run, type %SystemRoot%\system32\services.msc/s and then click OK.

  b. double-click Wireless Zero Configuration.

  c. in the startup type list, click Automatic and then click on apply.

  d. in the Service status area, click Start and then click OK.

  Apart from that, I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Issue of Dell Vostro 1500

  I just bought a vostro 1500 laptop with the 256 MB nvidia 8600M GT graphics card.  When I spoke a dvi port to dell customer service, I got two different answers.  a tech told Vostro is not normally a dvi output port, but they do if you get a 256 MB nvidia card, and another has told me that no all together.  anyone can check it for me?

  Thank you

  
  

• Upgrade processor or motherboard on Dell Vostro 230 Mini-Tower

  I have a Dell Vostro 230 Mini-Tower, and the vehicle currently has Intel Pentium E6500 processor. I would like to move on to something better, because my current processor does not meet the minimum requirements of some games I want to play. I was wondering what processor I could update? I know that the new processor has to adapt to the taking of the motherboard, but I don't know how to find out what socket has my current motherboard, or even what motherboard it is.

  I would also like to know, if I upgrade the processor, but instead get a new motherboard, can't I get a motherboard and plug and it will come with a new processor, or he will have to adapt my current processor? Upgrading the motherboard makes much difference to the speed of CPU if I don't actually pass the processor?

  I am running Windows SP3 & DirectX 11, with 4 GB of RAM, and I also have an ATI Radeon 5670 HD graphics card and a power of 300W.

  I have to get a new power supply if I upgraded the motherboard or processor?

  Hello

  I mentioned the list of processors that are also compatible with the Vostro 230 Mini-Tower.

  Number	Code name	Cache	Clock speed	Front side bus
  Q9650	Yorkfield	12 MB	3.00 GHz	1333 MHz
  Q9550	Yorkfield	12 MB	2.83 GHz	1333 MHz
  Q8400	Yorkfield	4 MB	2.66 GHz	1333 MHz
  Q8300	Yorkfield	4 MB	2.50 GHz	1333 MHz
  E8600	Wolfdale	6 MB	3.33 GHz	1333 MHz
  E8500	Wolfdale	6 MB	3.16 GHz	1333 MHz
  E8400	Wolfdale	6 MB	3.00 GHz	1333 MHz
  E7600	Wolfdale	3 MB	3.06 GHz	1066 MHz
  E7500	Wolfdale	3 MB	2.93 GHz	1066 MHz
  E6300	Wolfdale	2 MB	2.80 GHz	1066 MHz
  E5400	Wolfdale	2 MB	2.70 GHz	800 MHz
  E5300	Wolfdale	2 MB	2.60 GHz	800 MHz
  450	Celeron	512 KB	2.20 GHz	800 MHz

  Vostro 230/230 s has been tested with Intel G41 chipset (motherboard) with ICH07 only.

  Motherboard and processor are two different components.

  I suggest you to upgrade the processor.

  Answer just to get help.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• The upgrade of RAM and adding the Bluetooth Module in VOSTRO 1500

  Hello

  I'm planning to upgrade my laptop RAM 3 GB to 1 GB and also bluetooth with it.

  There will be problems in the upgrade. I am currently using VISTA ULTIMATE SP1.

  Dell Vostro 1500 / Core 2 duo 1.66GHZ/120Go/Vista Ultimate SP1.

  Please give me suggestions on this.

  Kind regards

  Maryse

  
  

• Disable the touchpad with Dell Vostro 1500

  How can I disable/enable the touch pad? It makes me crazy when you type the letters. I have a DELL VOSTRO 1500.

  How can I disable/enable the touch pad? It makes me crazy when you type the letters. I have a DELL VOSTRO 1500.

  I gave an answer to the same question. Please click the link in this thread:
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/e5f45e65-1732-44e9-AF28-3bea88fe123f/#aee5f6fd-B0A6-4009-Ba94-b8ab965087a7

  t-4-2

• Problems with WiFi on Vostro 1500

  gSo, I got a vostro 1500 last year, it has been renovated and came with windows 7 32 bit edition Home premium installed - and the wifi worked perfectly.

  I downloaded and installed pcsx2 that in turn downloaded some other stuff that I don't really know.
  
  
  This is where my dilemma begins. Then the closure, it was apparently installing update, but the battery was 2% and he died while doing this. Subsequently I Plug and windows does not just start, it goes past the "starting windows" screen, but after that it does is display a black screen and never ending start.
  
  
  After days of constant frustration, I installed a new copy of windows 7 64 bit ultimate, this is where it started. My wifi does not work. He sees available connections, but does not just connect, and even if it is (after a long time) I get a limited connection, diagnosis me say "Wifi connection doesn't have a valid ip address" I tried everything I read online order winshock for re - a corner of the card wifi, re-installed the drivers - I get nothing. So for a week, I dropped the laptop, and when I put it on, it automatically connected to the WiFi in my house, so I unplugged it so that I can use it later, an hour later, I put the laptop wifi is back to his usual behavior
  
  
  So I tried to install the windows vista that came with it, and it has worked (. _.) Without install me all drivers his summer works fine but the problem is windows vista lag on this system and I can't continue to use it. I need a way to get wifi working on windows 7
  
  
  From what I can tell its using an intel 3945abg card.
  
  
  I think to buy a new wifi card, but the fact that it works on windows vista makes me think its more of a software problem, not hardware, and change the map will not solve the problem
  
  
  Please what do I do?

  The problem might be that you installed an operating system to 64-bit on a machine that has been designed and supplied originally from 32-bit (XP and Vista).

  In all likelihood, there is no good driver 64 bits for your Wi - Fi card, which would explain why it works with Vista 32-bit, Windows 7 32 bit, but what you have now.

  If you can figure out what adapter Wi - Fi you have, you might be able to get drivers 64-bit from the manufacturer of the device to save the day...

• Microphone doesn't work is not on my Vostro 1500 with Vista Ultimate

  I recently received my DELL Vostro 1500 which has a Sigmatel Soundcard and I installed Vista on it and found that Vista had already installed a generic driver of high definition for him. So, I was ok. But then I found that the built-in mic or even an external MIC does not work. I get a harwarde is unavailable or not installed error. Someone help me please...

  I browsed the forums and found a lot of pilots who are supposed to be its Sigmatel for Vista drivers, and whenever I tried to install one of them I get an object not found error or something similar to it.

  I have a dual-boot configuration, so I am running XP as well and everything works fine under XP with the drivers provided by DELL. But not on Vista...

  DELL technical support, it's not what I expected since I recently moved to this laptop from my previous HP-Compaq Presario 6000 and HP support was great, including the live chat with technical support people who helped me with my problems of pilot with this laptop. I now regret to have bought a DELL laptop, since I do not get the kind of service that I expected from DELL. In any case...

  SOMEONE... PLEASE HELP ME!

  
  

• USB ports not working not not in Windows 10 after update laptop (Vostro 1500)

  I updated an old laptop, Dell Vostro 1500 from Windows 7 to Windows 10. Everything is great, the touch pad works, it is much faster than it used to be, one thing is, none of the USB 4 ports work.

  I went to the dell website, all I get is an alert indicating the device is not compatible with Windows 10 and that everything is up to date. I couldn't find the specific drivers on the website of intel and their program detects that too, everything is up-to-date

  I have google and could not find anything other than sites like pilot scape, which I don't know

  In Device Manager, there are 14 points to USB, there are 7 USB Universal Host Controller family with 2830-2836 A numbers

  Besides, there are 7 USB Root Hub with an error symbol. When I check the properties I have "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19)"".

  I tried to uninstall and looking for changes, that did not work. I also tried fix registry of CCleaner

  What are my options, is it possible to get USB ports work on my laptop?

  Thank you

  Hi Benny,.

  If please see my previous response to jtrand02 and click on the link for a list of compatible systems.

  The model of your system is not compatible with W10. I advise you to stay with W7/W8.1 unless you want to try your luck with W10.

  Let us know if you have any other questions.

• Vostro 1500 - everything was suddenly good chart run slow

  Hello

  I have a vostro 1500 (as you know) with 8600M gt graphics

  laptop worked fine with win 7, play a lot of games (modern warfare 3, border area 2, civ 5,...). graphical setting was low but games run almost smooth.

  3 months ago a big problem happened. each associated graph things become slow. lag in all games, or even warcraft 3 (year 2003), I used to play with the highest settings, now same menu have lag.

  and the problem is not there, I felt some lag in windows too. for example in the columns resize task manager return with flickering in the text of the lines and was too slow. When to take out a window off the screen and bring it back again a few lag that was not there before. menu start even expanded her child with a lag. I know not 'gal' has any meaning here, but I think that u understand what I'm saying.

  I reinstalled windows, directx and drivers installed. test games disabled, problem solved. 15 minutes later after the installation of windows updates. graph slow slow slow.

  OK, reinstall win again once, no update. slow once again.

  my friend told me to install win 8. OK, after installing win 8. no problem that happened for about 1 month.  but now same problem. I'm going crazy.

  Yes, I have installed many software programs, including some software open source, but it is not the question, why in win 7? without any updates and the software installed.

  Help, please

  About the adapter, you must ensure that it is correctly listed in the BIOS - with or without battery. If it cannot detect the type of good adapter, it will punish you by slowing down the system. A power supply loose cable broken etc could easily cause intermittent problems.

  Pointed out a possible heat problem as "ejn63", is always something I forgot to mention. If you have replaced parts of the thermal system also make sure that the screws (or other) are tight and trim of thermal/thermal paste is applied correctly.

  ======================

  Don't really know what the diagnostic message...

• El Capitan upgrade must be done with a clean install?

  Hello

  El Capitan upgrade should be done with a clean installation, as opposed to an upgrade?

  I don't know how to do this, or what are the advantages and disadvantages?

  This means all the software on my computer is deleted and I need to re - install all the applications (if installing a clean)?   I think not so thought I had better ask!

  Best regards

  Mike

  If you have existing question in your system current, then things could get worse if you upgrade simply. My personal choice is always do a clean install of newest version of Mac OS X.

  How to perform a clean install of OS X El Capitan on your Mac.

  How to prepare your Mac OS X 10.11 "El Capitan."

  OS X El Capitan-download and Quick Installation Guide

  Make your own installer from El Capitan flash drive using the El Capitan tool:

  Be sure to save the installer in the downloads before installation folder, otherwise it will be deleted once the installation is complete.

  You can create an installer of flash of El Capitan via the Terminal drive. El Capitan has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath X\ "/ Applications/install OS X El Capitan.app.

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Upgrade my Eee PC with Windows XP to Windows 7 Professional.

  I'm trying to upgrade my Eee PC with Windows XP SP3 to Windows 7 Professional. I get an error Code: 0x80070005. Please advise... anyone?

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Vostro 1500, no S/PDIF sound

  Hello. I'm trying out his SPDIF on my Vostro 1500. If I understand correctly the SPDIF is routed to the "S-video" at the rear port and you need to use a dongle to get SPDIF out.

  I have a Dell 044CTV dongle (is that the correct type?) which connects on port 7 pins in the back and I plugged a dongle SPDIF coaxial cable, which is then connected to my receiver audio home theater.

  I have no sound from the laptop. The laptop is not yet recognized by the receiver when it is plugged. I know that the setting of the receiver and the cable is correct. If I unplug the dongle cable and insert it into my DVD player, I hear, so the problem is either in the dongle or computers portable software or hardware.

  I have updated to the latest Sigmatel driver on the dell support Web site. I have indicated the S/PDIF port as the audio driver by default in the settings sound and mute it.

  I tried the DTS, Dolby Digital, and tests of rate of samples in card SPDIF properties. Still no sound came out of the computer during these tests or during multimedia playback on the computer.

  I don't know what else I can try. I think that the dongle is maybe wrong but I can't find a suitable for the Vostro 1500 series, so I tried this 044CTV one.

  There are also other problems, but I don't know if they are relevant - I get these annoying beeps when you use headphones in the headphone jack, it's okay if I play something, or if the volume level is loud or quiet, or if I'm muting it altogether.

  If anyone has any input or experience with what I would be happy, it's driving nuts me right now.

  
  

• I don't have stereo mixer in W.Vista - Vostro 1500

  Hello

  I buy a Vostro 1500 with 9205 Sigmatel sound card and Windows Vista, but I cant'n use the stereo mixer, I have stereo mixer need, how are I have set this up?

  Thank you!

  Edgard.