Mouse lag wireless

Similar Questions

• The Explorer Microsoft touch limited edition mouse lag all the time and everywhere

  Original title: mouse late

  I just bought a mouse yesterday, (explore touch limited edition). That is fine, but my problem with this one is the answer developed. from time to time when I try to move, it lags behind which is very irritating.

  It happens in games, at the office, everywhere and all the time...

  My windows 7 (64-bit) and I have already downloaded and installed the driver recommended but not luck.

  any ideas?

  Hello

  You can perform the following methods and check if it helps.

  Method 1: troubleshoot failures in the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

  Method 2: solve a wireless mouse that does not correctly http://support.Microsoft.com/kb/321122

  I suggest you to contact the Microsoft Hardware support for assistance. http://www.Microsoft.com/hardware/en-us/support/contact-us

  How to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.Microsoft.com/kb/326246

• HP all-in-one: I can connect a mouse not wireless to the computer

  I have a desktop all-in-one computer (HP Pavilion with Windows 8) wireless mouse and wireless keyboard. What happens if the mouse falls to the floor and breaks? Do I need a new mouse or can I connect a normal mouse with a USB port to the computer? Or if the computer works with a wireless mouse?

  You can plug a USB to your PC all-in-one mouse.

  You won't find the drivers, given that Windows 8 will provide the driver as soon as you plug in the mouse.

• Renaming of mouse and wireless keyboard

  I bought a used A1314 and Magic Mouse apple wireless keyboard to use with a Power Mac G5. Both are discoverable and paired and working very well but when I go into the preferences system and then select keyboard and mouse in the status area that opens both name boxes are empty and it does not show battery levels. I am not able to rename either if I go to Bluetooth and open it. This isn't really a problem because they work very well, it's just I want to name them. Someone at - it arrived through this to know how to fix?

  Thank you

  Open BlueTooth preferences, select the input of the unit, then CTRL - or RIGHT click and select Rename from the context menu.

• Spectrum x 360-13-4003dx: mouse Lag!

  So, I use my laptop anchored much and I keep getting a HUGE mouse lag when you run a program or the two (e.g. MS Word and Firefox). I tried using my dock usb 3.0 docking or just plug my monitor via HDMI so I think that I removed the USB key as a possible limitation facor here. Doesn't this sound like the laptop suffers from problems of load, or simply bad MS drivers for my mouse (FYI it's a MS mouse).

  OK, so I called HP customer care today and the phone said to go online and create a ticket. So I went online to create a ticket, and he told me that my ONLY option was to call. It was 10 minutes of lost...

  So I called again and talked to a woman who has been kind enough and understood my problem. After booting into recovery mode and play in the menus that we seemed to be sure that the equipment works fine as I had no lag in these menus, so it must be a software problem. Because I have all the Windows updates and all updates via the HP Support Assistant installed, the only option that I was with was to factory reset my computer. Obviously I did that, I didn't lose my files.

  So, I paid a private company in the region. $100 and three minutes later, I uninstalled the Synaptics drivers and everything works.

  I am happy that my computer is works better, I love the computer, but quite upset that HP is unable to provide support for their own equipment and I had to go elsewhere for this support.

• Mouse and wireless keyboard no longer works

  my hp dv6000 laptop came with the mouse and wireless keyboard, and I use them for 2 years with no problems. Today, while typing, the keyboard is not responding, as well as the mouse. the red light on bottom of mouse is on. I tried pressing and holding the Connect button on the receiver; no lights are lit on the receiver. I have replaced the batteries in the keyboard and the mouse. no action has resolved the problem. I restarted my laptop and that didn't help.  I would try to download the driver for the mouse and the wireless keyboard, but I don't know what is the driver. can someone help me. Thank you

  MY KEYBOARD WOULD ' T CONNECT AFTER AN UPDATE OF THE SYSTEM. IT WAS DUE TO A ZONE ALARM IN MY SECURITY SOFTWARE THAT PREVENTED CONNECTIONS UNAUTHORIZED WIRELESS. CHECK THIS BOX IF YOU HAVE ALREADY DONE A SYSTEM RESTORE AND BATTERIES AND SWITCHING USB PORTS AND UPDATE DRIVERS AND UNLOAD THE CAPASITORS AND OTHER GOOD LUCK!

• Mouse button Wireless intellimouse (2.0) does not.

  My right button of mouse wireless intellimouse (2.0) began not working not properly. It will not immediately show drop in excel. Sometimes, it will be after the number of clicks. What is the problem? Help, please!

  Hello

  1 did you change on your computer?

  2. not this problem only occurs with excel or another application?

  3. do you have a third-party mouse software installed?

  Step 1:

  If you have any other software mouse that is installed, such as the Logitech software or touchpad, this software can conflict with the IntelliMouse. To uninstall the software that may conflict, follow these steps:

  a. open programs and features item in Control Panel. To do this, click the Start button, type "appwiz.cpl" in the search box and press ENTER.
  b. follow the instructions to remove the software, and then restart the computer.

  Step 2:

  Update the drivers by visiting this website and check if that helps.

  http://www.Microsoft.com/hardware/en-us/d/Wireless-IntelliMouse-Explorer-2.0

  See also:
  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/953691

• ARC mouse and wireless keyboard to stopped working after update

  On Tuesday, my keyboard Microsoft's ARC mouse and wireless are busy to my desktop HP running Windows 7 Ultimate.  Since then, there has been a number of updates installed and the ARC keyboard and mouse are no longer works.  I got out my old clumsy Laser Keyboard 6000 and plugged in and it does not work this is how I write this.  But enter the Device Manager or the installed Microsoft keyboard application does not show the ARC keyboard or a mouse as even installed.  I plan to do a system restore, but I probably need security updates installed on 4/14.  Ideas?

  UPDATE:

  Thanks for the suggestions.  I would have thought than to simply unplug it disconnected and reconnected the cause would detect automatic to reinstall drivers, as suggested by @cookie7746 - but it was not detecting the keyboard and the mouse at all, even at the start of the system when only the BIOS is running.  Who told me I could have a hardware issue not only a software driver problem.  I followed him there down to a faulty USB Extender.  Not related to the software, but a hardware problem.  When I replaced the USB Extender that the connections for the mouse and keyboard of the CRA is well connected, everything works.

  So suggestion for those who encounter it: try restarting and during switching on, press the function keys that you use to enter the BIOS settings screen - it is usually CTRL/A or F10 or something - it will usually tell you in a message is displayed briefly that you start.  If it works, you know that you have a good physical connection and the problem is a Windows driver issue.  If this does not work, the problem is not with Windows - it's a hardware connection problem that can be caused by low batteries or dead in the camera (I had this happen to me) or something with USB connections.  Best suggestion at this point is to start eliminating things (like me) by unplugging it the USB Extender, I had these connected directly to USB ports on the computer.  With this process of elimination, you should be able to narrow down the problem.  Good luck!

• Mobile mouse 1000 wireless problem

  I have Microsoft Wireless mouse 1000, I used it on more than 6 months but now its not working, when I try to connect the usb key to one of the ports on the computer it show me error this device is not recognize and dysfunction. will you please help with this thank you

  Hello

  
  1 - is a 32-bit OS or 64-bit?
  2. What is the edition of Windows that is installed on your computer? For example Windows 7 Edition Home Premium, professional.
   
  Method 1:
  
  Try to connect other USB devices to the port and check if it works.
  
  Method 2:
  
  Connect the mobile mouse 1000 wireless to a port on another computer and check if it works.
  
  Method 3:
  
  Download all drivers available from the following link
  http://support.Acer.com/product/default.aspx?modelId=2167
   
  Check if it helps.

• When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose

  When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page.  It ignores even the large amounts.  This can be solved? Rose

  Hi Rose,
   
  The problem occurs on specific applications?
   
  This can be for one of the following reasons:
  1. bad mouse is selected in the IntelliPoint software.
  2. conflict with other mouse or pointer (non-Microsoft) software.
  3. problem with IntelliPoint software or drivers.
  4 application does not correctly recognize scrolling the mouse messages.
   
  I suggest for the link and follow the steps in the KB article:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
  Note: Put the computer to normal mode after the troubleshooting in clean boot mode.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Why the plugin mouse caused wireless keyboard to stop working on my Acer computer?

  I have an Acer with Windows 7 wireless computer. My wireless mouse is starting to wear and I had a plugin standard mouse to replace it. After the installation of the mouse, my wireless keyboard has stopped working entirely without warning. Could you tell me what went wrong?

  Hi WendyMurphy_904,

  Thanks for asking this question to Microsoft Community!

  I understand that you are facing problems with a wireless computer keyboard. Don't worry; We got some troubleshooting methods in order to get this fixed number.

  He would be grateful if you could answer these questions as well.

  (1) did you of recent changes to the computer before the show?

  (2) what is the brand and model of the keyboard?

  (3) is specific to a particular application question?

  To fix your problem, try the following methods one by one.

  Method 1: Mouse, keypad, touchscreen and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 2: chess answer problems related to the mouse or wireless keyboard http://support.microsoft.com/kb/838398

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• USB mouse and wireless keyboard/touchpad cursor, lags and freezes

  Original title: cursor lag / freeze

  a system slow, very slow or cannot manage not to load the devices & printers, his noisy hard drive, excessive heat, mouse and keyboard lag / freeze

  constantly fight my wireless mouse and it's not the mouse itself. Tried to open my DEVICES & PRINTERS TO SEE what WAS PRINTING, and after waiting forever to make it load, it is still impossible to open? > NOTE: for the moment, my main concern is to understand what is happening with the mouse and keyboard on board pointer device

  SONY VPCEB (INTEL CORE i5) WINDOWS 7

  Help, please! Any help at all will be greatly appreciated!

  Thank you very much!

  scottyboy24

  Hello

  Your main concern maybe the mouse, but I'd be worried that all of the computer is about to fail. The hard disk should not make any noise and should not be excessive heat, or the slow loading of applications. Frankly, this looks like a pending hard drive failure.

  Not exactly the answer you wanted, but its my best advice. Back up your data and programs and seek to replace your hard drive. At the very least, I would have the computer checked out by a good reputation for service Tech. Sorry, but this seems to be hardware problems and not software problems, we are dealing with here.

  Let me know if this helps you.

  Kind regards

  BearPup

• Bluetooth keyboard and mouse Lag

  MacBook Pro retina end of 2013

  OS X El Capitan 10.11.4

  I have finally upgraded to El Capitan in Yosemite. I never had any problems with my keyboard and mouse before. However, immediately after the upgrade I experienced lag/stutter my Magic Mouse. In addition, my keyboard is sometimes unusable. I hit the SPACEBAR and my computer will insert 5 +. I'll hit back and it will delete entire words/lines.

  I tried...

  1. restart the computer.
  2. bluetooth disconnection/connection
  3. keyboard and mouse of disconnection/connection
  4. Remove and repair the keyboard and mouse
  5. restart the computer several times :-)

  Nothing seems to work. Any ideas/suggestions?

  Article Apple > If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support

  I is not correlate your measurements with those of article-, but from scratch, as if the devices were NEW seem logical

• Magic Mouse Lag and disconnection

  10.11.5 MacPro 5.1 mid-2010

  The offset of the mouse and the disconnection is so bad that I had to go back to a mouse that is causing a problem in my production. I'm a graphic designer and the need that the mouse. I tried all of the solutions I've read here and on the web without success. I'm going to buy a bluetooth adapter to see if that helps at all. Any suggestions on this dongle/adapter or if someone found a solution to this problem of bluetooth. I have new usb 3.0 devices and cables to come this week and as I read disconnection worsens with usb 3.0.

  Anyone, please help before I have no hair left!

  If your using a first generation Magic Mouse, the disconnection problem is sometimes caused by faulty battery contacts. Here's a solution:

  How to fix the magic mouse disconnect problems

  Tracking errors can be fixed by simply cleaning the lens: Year Easy Fix for a Magic Mouse Tracking problem

  And some bluetooth connection problems are caused by a corrupted preferences file: How to fix the OS X Bluetooth Wireless problems

  Tom