mouse not detected

Similar Questions

• USB mouse not detected at startup.

  Hello

  My new HP USB mouse is not detected when I start my PC. I have to unplug & plug to make it work every time. My USB ports are fine and my previous USB mouse still works fine. I deleted installation driver from the Device Manager, but no utility.

  I have Windows XP.

  No idea how to solve this problem?

  Shaan-

  HiShaan,

  I suggest you contact the manufacturer of the computer and check if USB devices is enabled in the BIOS and enable it and check if the USB mouse is detected when you start the computer.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  You can also check if the Interface device access human service is set to automatic and started. You can change it accordingly and check if it helps. To do this follow the steps below:

  1. Click Start and click Run.
  2. In the Run dialog box, type services.msc and click Ok.
  3. In the services window, scroll down to Human Interface device.
  4. ClickHuman double Interface of device service and click the general tab.
  5. Change the startup to automatic type, then click on apply.
  6. Click Start, and then click OK.

  Restart the computer and check if the USB mouse works fine when the windows start.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless mouse not detected in Windows 8

  computer doesn't detect mouse Microsoft 1679 wireless model. I am running windows 8.0

  Original title: wireless mouse

  Hello Peter,.

  We are sorry for the inconvenience. Let me help you.

  Before you go, let us know a few more details on the sub questions.

  • What is the brand and model of the Windows device you use?
  • What is the status of the device mouse under Device Manager settings?
    Press on logo Windows + R > type devmgmt.msc , and then press ENTER to open the Device Manager.
    Note: Unknown and uninstalled devices are listed under other. The device will have a yellow to this topic alert symbol. The properties of the device indicates that no driver was found.

  Now, follow the methods and check them off below if it can help solve the problem.

  Method 1

  Make sure that the Bluetooth settings is enabled on your device. Follow the steps below.

  1. Turn on your Bluetooth device and make it discoverable.
     The way that make you it discoverable depends on the device. Check the device, or visit the manufacturer's Web site to find out how.
  2. Click the Start button > type Bluetooth > select Bluetooth settings in the list.
  3. Activate Bluetooth > select device > pair.
  4. Follow all the instructions if they appear. Otherwise, you are done and connected.
  Your device Bluetooth and PC will be connected usually automatically each time that the two devices are in range of each other with Bluetooth turned on.

  Method 2

  Material and device Troubleshooter

  Follow these steps to run the Windows in built store. It is a diagnosis that identifies any associated potential driver issues present in your PC.

  (a) write Troubleshooting in the search charm and click on enter.

  (b) click the Troubleshooting .        

  (c) click view all in the upper left corner.

  (d) select the material and devices in the list.

  (e) click Next to run the hardware and devices troubleshooter.

  If this does not help, run the fixit from following link and how it works.

  Hardware devices do not work or are not detected in Windows

  Write to us with updated status and the information required to allow us to help more.

  Thank you.

• Bluetooth mouse not detected on Windows 8.

  Original title: mouse bluetooth problem

  A cleaning set to win 8 on Netbook Acer Aspire One 722. So far, so good except a 'Service Exception' alert. He himself worked and finished configuring updates at startup, but it is another question.

  My 'add a device' does not recognize my new Bluetooth mouse. I went to services and turned to automatic and always win 8 is not see it. The manual of the manufacturer says that the mouse is looking to be recognized because the light will blink. I went to gigabyte.com and the only available download is the manual. Flight mode: Off and Wi - Fi: on.  I read comments before I bought it, and others said they used it with Windows 8. I always use a Wi - Fi with this Netbook. I tried to turn on network discovery and sharing, as recommended through help? Still, the operating system does not see the mouse.

  System:

  Win 8: Acer Aspire One Netbook 722

  Bluetooth mouse:

  Gigabyte M7700B

  Thanks for any help you can provide.

  Hello

  Welcome to the Microsoft Community and thank you for the post in there.

  According to the description of the problem, you try to connect a wireless mouse to your computer, but it is not detected.

  Please write us with the following details.

  (1) you get an error message?
  (2) can you see the device in the Device Manager?
  (3) you are able to pair it with your computer?

  I would suggest a few troubleshooting methods. Follow the methods shown here.

  Method 1: Run the hardware and the resolution of the problems of the unit.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Follow the steps below:

  (a) press Windows + W together.
  (b) writing Troubleshooting in the search to the corner box and press on enter.
  (c) click the Troubleshooting tab.
  (d) click view all in the upper left corner.
  (e) select the options of the equipment and devices in the list.
  (f) click Next to run the tool material and device.

  If the problem persists, proceed to the next method.

  Method 2: Download and install the driver for the mouse wireless from the manufacturer's website.

  Click on the following link and download and install the latest driver.

  http://www.gigabyte.com/products/product-page.aspx?pid=2933#DL

  If you do not get the driver for Windows 8, then you can install driver for any version in compatibility mode.

  Please follow the steps given below link:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  I hope this solves your problem, please write to us if you have any question related to Windows.

• Mouse not detected in Windows XP SP3 feet.

  Original title: foot mouse

  OK, this is meaningless.

  I work with my friend that you just returned from Iraq. I bought her mouse FOOTIME. When I try to insall on its Windows desktop is not see it. However on my portable device is workign correctly. Both are Windows XP SP 3 HP.

  Things I've tried so far:

  Put another USB port.

  Update the USB drivers

  Search for new harware in Device Manager

  MrFixit downloaded from microsoft.com

  I think I should update the chipset drivers, but I have really no idea.

  Hi curious,

  I think is a good idea to update the chipset drivers.

  It can solve the problem of USB and the printer is not identified.

  If you list the HP model, we can try to direct you to the update if you are unable to locate it on the HP site.

  I'm sure you have, but make sure that you have to restart the PC after removing USB Device Manager instances.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• mouse not detected USB

  Hi, today I bought a mouse wireless laser ND24G, ive plugged into my usb port on my toshiba l300 satellite laptop pro OS windows, but windows vista does not recognize, don't jump to the top of the tool bar, I can't find in device sound Manager nowhere to be found! I didn't get a cd or any software with it and have no idea WOT to do now?!

  
  

  Yes it is but ive just run! I just HADD to uninstall others saved devices in Device Manager! Thanks anyway!

• Intermittent problem "USB not detected" Genius Traveler Laser 315 mouse.

  Original title: the USB mouse not detected

  -------------------------------------------------------------------------------------------------------------------------------------------------

  My problem is this: I have a Genius Traveler Laser 315 mouse which I brought last summer and it worked perfectly on my laptop. Recently I bought a new laptop, on which the mouse no longer works.
  The problem is very awqward, because the behavior of the mouse on the new laptop is completely random: repeatedly he actually worked perfectly when it is plugged-, but most of the time (e.g. After restart of the operating system or unplug the mouse and in him plugging back) it didn't. This behavior is even more strange, because on my old laptop and several others, the mouse still works perfectly.
  My opinion is that the problem is with USB drivers or a mouse, but when I tryied another mouse and disk external DRIVE on the new computer laptop, they both worked very well. I even copied oriented drivers on my old laptop to the new usb, hoping that I could solve the problem in this way, but the result was the same (on two laptops, the OS is Windows 7).
  Another possibility is that one of the sons of the mouse cable was broken, but I passed that, too, because I've tried twisting the rope as much as I could while he worked on the new laptop and it has always worked well.
  The USB on the new laptop computer Sockets all work (I tried all).

  I know that the simple solution is to buy another mouse, but rather what's wrong with it (or my new laptop) to spend the money to replace a mouse I know it's functional, because I feel that this money would be lost, I have no guarantee that the new mouse work (if I wanted to buy a new (, I'd still go for a genius) and, for that matter, I would be really happy if I could solve this annoying problem.

  If you have an idea where is or where could be the problem, or how could determine to hit or where I could get more help, I would be grateful for any comments.

  More details that might be useful:

  -on all laptops I tried the mouse of the operating system is Windows 7 Ultimate (and my old BONES and my new laptop was installed on the same CD)
  -the old laptop (on which the mouse works) is an Acer Aspire 5630
  -the new laptop is a Dell Inspiron N5010

  -------------------------------------------------------------------------------------------------------------------------------------------------

  OK, sorry, this is the mail that I sent to the support of the engineering team. But it provides a good background.

  I tried all the 'classic' fastening means (I'm not really sure, but I think that I also reinstalled windows AFTER seeing the problem)

  Any ideas? Thank you!

  EDIT: I mean REALLY not detected, not even as an unrecognized device by the "undetected".

  I have tried them all. The only strange thing that happened was when I opened the mouse: strangely, he started working beautiful (I disconnected and reconnected it several times and it has continued to work). Of course, the miracle did not last, but at least now I'm sure that there is a problem with the sons of the mouse - I think that one of them might be slightly broken somewhere inside the mouse, or immediately after the release of the cord there. Now, the question is why is my new laptop the only one who refuses to detect the mouse.

  The new most plausible problem is far beyond the scope of this forum, I'm going to look elsewhere, but I thank you again for your time and patience!

• My macbook does not detect the dell wireless mouse

  I have the macbook air. I tried to connect my macbook to my Dell Wireless mouse. But my macbook could not detect the mouse

  Without a model number, we cannot exclude that particular mouse is incompatible with OSX, especially if it is old.

  OS X pair with a large number of devices bluetooth automatically, but some need to be put in pairing mode.  You will find the Dell mouse model and see if that is his business.

• IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

  I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800.  I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons.  I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device.  The software installed with no problem, but it will not detect the mouse and I can't program the buttons.  On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID).  The mouse works with the basic functionality, but I need to program the buttons

  Hi John,.

  If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.

  For confirmation, this is the link for the latest driver:
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000

  If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Please let us know if you have more queries on Windows.

• Bluetooth mouse is not detectable

  I've been using a Bluetooth mouse for a month, and he would sometimes disconnect. I usually remove him in the devices tab and try to add it again and it usually starts works very well, but this time it was not detectable. I changed my Bluetooth Support Service to automatic, and then he asked an access code I never together. I tried to enter "0000" to get the code, but it didn't work. I tried to update a Bluetooth driver and I restarted my computer, but now my computer cannot detect my mouse even when I try to connect it. To be honest, I've been frustrated of some sort, and I'm not really even sure if I should have updated the Bluetooth driver. I used the "Intel Bluetooth" (Version V2.6.1210.0278) driver update. Can I try if I need to provide more information. What should I do?

  Mouse model: Gigabyte M7700B
  Laptop model: ASUS R405C
  Operating system: Windows 8

  Hello

  I would suggest you UN-pair mouse Bluetooth computer (device and printer), uninstall all software associated with the Bluetooth of the computer mouse then uninstall the Bluetooth computer drivers and install them again and check.

  -In the charms of the search, type uninstall a program.

  -Locate the Bluetooth mouse software and click on uninstall.

  -In addition, uninstall the Bluetooth of Intel software.

  -Once the software are uninstalled, go into Device Manager by using the search bar charms.

  -Browse Bluetooth, do a right-click on the driver and click on uninstall.

  -Restart the computer and download the driver from http://www.asus.com/supportonly/R405CA/#support_Download

  Let us know if that helps.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• Satellite A205-S5880 (PSAE3U) downgrade Vista to XP - does not detect HARD drive

  Hi all
  I got this hair loss situation, I had a satellite A205 - S5880 (PSAE3U) and decided to downgrade to XP, I got all ready drivers for XP (I have the EMEA support site and the wireless from a Czech website), I have my windows XP SP2 g CD and I get after loading everything Since the CD that my HD is not detected or not recognized and it tells me to make sure I have connected (I know I do).

  After doing a search of loong on the web, I discovered I have need the drivers (or something like that) to my HD which is a Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA). My bios won't let me put my SATA to IDE (or something like that) also to update and nothing, please I need my Windows XP CD to read my HARD drive, and I can take care of the rest (at least I think so, otherwise I'll ask again: D).

  I also found that I can watch my motherboard chipset for motherboard for my HD controller, it ' s (i think) a toshiba ILHAM v1.00 or Intel Crestline - GM GM965.
  Maybe this info also works: Intel ICH8M

  I would totally be apreciate all the help, thanks in advance. I am able to give any other information you want
  in any case here is a summary of my pc with everest
  ================================================== ================================================== ========================
  SUMMARY OF EVEREST
  ================================================== ================================================== ========================
  Computer
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium
  OS Service Pack Service Pack 1
  Internet Explorer 7.0.6001.18000
  DirectX DirectX 10.0
  Computer name USER-PC
  Name of the user
  Domain logon user-PC
  Date / time 2009-05-02 / 21:37

  Motherboard
  CPU type Mobile DualCore Intel Pentium, 1866 MHz (14 x 133)
  Card mother name Toshiba Satellite A205
  Motherboard chipset Intel Crestline - GM GM965
  Memory system 3061 MB (DDR2 - 667 DDR2 SDRAM)
  DIMM1: Micron Tech 16HTF25664HY-667E1 2 GB DDR2 - 667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  DIMM3: Hynix HYMP112S64CP6-Y5 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  Type of Phoenix BIOS (15/05/08)

  Display
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Accelerator 3D Intel GMA X 3100
  Monitor monitor generic PnP [NoDB]

  Multimedia
  Audio adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio Controller

  Storage
  Controller IDE controller Intel(r) ICH8M SATA AHCI - 2829
  Controller IDE Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
  IDE controller Texas Instruments PCIxx12 Integrated FlashMedia Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA)
  Optical drive MAST * a DVD-RAM UJ-850 s ATA Device (DVD + R9: 4 x, DVD - R9:4 x, DVD + RW: 8 x / 8 x, DVD - RW:8 x / 6 x, DVD - RAM: 5 x, DVD - ROM: 8 x, CD:24 x / 16 x / 24 x DVD + RW/DVD-RW/DVD-RAM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) 125915 MB (102380 MB free)
  D: (NTFS) 64863 MB (12885 MB free)
  Total size 186,3 (112.6 free go-go)

  Entry
  Standard PS/2 keyboard keyboard
  Alps Pointing-device mouse

  Network
  Main IP 192.168.0.199
  00-1B-9E-FB-8B-DF main MAC address
  Atheros AR5007EG network (192.168.0.199) adapter wireless network card
  Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0) network card
  TOSHIBA Software Modem modem

  Devices
  Printer Microsoft XPS Document Writer
  Printer send to OneNote 2007
  Controller FireWire Texas Instruments OHCI Compliant IEEE 1394 Host Controller (PHY: TI TSB41AB1/2)
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB camera Chicony USB 2.0 Camera
  USB device USB Composite device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version V5.60
  TOSHIBA DMI system manufacturer
  DMI system product Satellite A205
  DMI system Version PSAE3U-08C023
  DMI 68221541 K-system serial number
  DMI system UUID EA88852C-3BD111DD-968C001E-EC3CB59A
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product ILHAM
  DMI Motherboard Version 1.00
  DMI Motherboard Serial number 0123456789AB
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version n/a
  DMI chassis serial number, no
  DMI chassis asset tag *.
  DMI chassis Type Notebook

  ================================================== ================================================== ========================

  Hello!

  You will find hundreds of discussions here in the forum about this, if you install Windows XP and Vista from a Microsoft disc and the HARD drive can't be detected... So he s strange to read these questions again and again.

  However, to install Windows, you need the SATA drivers or let's say the Intel Storage Manager package. It contains the driver you need. You can then create a new installation using nLite [www.nliteos.com]
  Or look you at this Toshiba document: http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm

  Good bye

• Dynadock U3.0 has not detected 2nd screen to help to win 8

  I don't want to return this product, but if I can't solve this problem I don't have many choices.

  I have Windows 8 Preview of consumer and Dynadock U3.0

  The mouse and keyboard work fine. The second screen was working fine for a few days, but suddenly stopped working after having to reboot my system.

  I have install the driver of Windows 8 Beta. I tried to uninstall and reinstall it, but this does not resolve the issue. My computer does not recognize the USB cable is connected to the computer is the dynadock. The Dynadock screen icon does not appear automatically.

  In view > resolution of the screen, my computer does not detect that a second screen is plugged.

  If I plug the screen directly into my computer, it works fine.

  When I try to install the driver while he is already installed, a message appears saying 'DisplayLink DisplayLink Graphics Software is already up-to-date.

  I tried to restart and re - plug in the USB. Nothing has worked yet.

  > I have Windows 8 Preview of consumer and Dynadock U3.0

  I think the problem is you are using Win 8
  I imagine that there are some compatibility issues as Win 8 is not official on the market

  You have the same problem with Win 7?

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• Satellite L50T - Has - Touchpad not detected

  I have a Toshiba Satellite L50T-A running 64-bit Windows 8. All of a sudden my touchpad has disappeared from the settings. When I do a search for new material, it is not detected or the other. What a trendy?

  I wish I had pictures with exactly what I need to do.
  Thank you in advance.

  Hello

  If I understand you right touchpad is not detected and do not appear in Device Manager, right?

  Problem is that you can not do much and touchpad to work force.
  What you can try is to test the feature with the factory settings. With other words, you can set the BIOS to default settings and reinstall the original recovery image. After that this laptop will have the same parameters as for the first day after the first start.

  If you do this, and the result is the same, that it is possible that the touchpad is defective or there is a problem with the touchpad to the motherboard connection. This should be controlled by the service of Toshiba.

  You use an external mouse at this time?