Mouse tutorial

Similar Questions

• How to stop the mouse wake up Satellite L850 fashion watches?

  Hello.

  I followed this tutorial:

  Stop the mouse to wake your computer go Sleep Mode
  http://www.howtogeek.com/HOWTO/10418/stop-the-mouse-from-waking-up-your-computer-from-sleep-mode/

  but it does not work in my Toshiba L850, running on Windows 7-64 bit (I have a wireless to usb windows mouse 3500)... Does not work either by disabling "wake up on keyboard" "on bios:

  http://img109.imageshack.us/img109/8659/ugk5.jpg

  Perhaps another way in the bios or windows? Any idea?

  Thank you.
  Editado.

  Disable options like Wake Up on keyboard or Wake up on LAN does not help you because these options are not related to the USB mouse.

  What you can try to do is to disable options like USB power sleep mode and emulation legacy USb that you find in the Advanced BIOS tab

  Otherwise, you can uncheck allow this device to wake the computer in Control Panel-> mouse-> Hardware tab
  Here, you have to ensure that you _did not select but_ especially hidden called USB compatible mouse touchpad mouse

• Retouching fast without using the mouse to the menu all the time?

  Hi again,

  Sorry its another novice question (and, hopefully, a really simple). I want to select an audio piece, delete it and sort the audio for the snap right position so no remains empty. For the moment, I have this by positioning the mouse to the top of the screen and selecting: Edit\Delete & Move. Is there a setting I can adjust so in the future, I can just press the delete key to get the same effect?

  A brain cell wrote:

  Hi again,

  I want to select an audio piece, remove it and then having the audio for the right snap in position [help] Edit\Delete & Move. Is there a setting I can adjust so in the future, I can just press the delete key to get the same effect?

  older versions of GB had a built-in keyboard equivalent for delete and move, but you can add it yourself via system preferences. If you do not know how:

  http://www.bulletsandbones.com/GB/GBFAQ.html#gbv10keyboardshortcuts

  This FAQ entry offers also a Minute GarageBand video tutorial

  (Let the page load COMPLETELY. The link to your answer is at the top of your screen)

• X 7500: customization of mouse HP X 7500 (mouse control center)

  Hello

  I just bought the HP X 7500 Bluetooth Mouse.

  While the search for the best shape, I stumbled on the YouTube page of the HP which had an overview of the mouse X 7500 and said at the end of the video, for the other custimization, mouse HP control center can be downloaded from the HP Web site.

  It is close as well as in the choice of this mouse, because I need to customize the buttons of my mouse.

  To my surprise, the software is not available on the Web site, and after further research, I found a tutorial page saying that it must be installed on the CD that came with the mouse. Of course, there was no CD provided with the purchase (even if there was, I have no CD-ROM drive).

  This pretty much of making the mouse useless for me, and no google search returns all results for mouse control center.

  All other mouse I had previously came with its own software (other brands, it's my first HP) allowing the user to customize his buttons and resolution/sensitivity etc.

  Anyone know where I could get the software, or maybe someone has a CD laying around? The mouse seems to fit comfortably in my hand, and it would be shame to return simply because HP is once more rather incompetent at his service.

  Any help would be appreciated!

  Hello @Kastytis,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue of the mouse and wanted to help!

  The Control Center software is available for the mouse on the HP site, but not for Windows 10.  You can try to use the software for Windows 8.  You can find the mouse drivers here:

  Drivers - X 7500 HP Bluetooth wireless mouse

  Let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Introduction to the tutorial of curve fitting - find a function

  I'm new to programming in Labview (and programming in general) and so I'm learning the different functions in Labview that are likely to be relevant to the work that I do.  One of the functions I'll take advantage in Labview is the curve of the functions.  To this end, I found a number of tutorials that are available in the area of the developer, and the plan is to work my way through some tutorials apply in order to understand the processes involved (and how to use features etc.).

  The tutorial that I am currently working my way through is the Introduction to the tutorial Curve Fitting, and is where I am currently blocked.  To work through the linear curve of squares vi, as shown in Figure 3 of the tutorial, I can't seem to find the function that the linear data vi and the vi curve are interconnected and which connects to the curve of the linear model.  When I say that I can't find the function I want to say that I can't find the feature with the Schwaar icon in the Labview version that I use currently (it is the Labview 8.6 development system).  Can I get help with the function I need to use?

  I note, however, that the tutorial was written in 2006.  Would be - why I'm unable to find the function indicated (that is to say, he has changed since this tutorial was written)? If this is the reason why, anyone knows what is now the correct function?

  The tutorial can be found here: http://zone.ni.com/devzone/cda/tut/p/id/7669.

  Thanks for your help.

  Hey Scottum,

  This is the function table to build in the range of table in respect of the programming.

  If you hover over it in top and bottom of the function, you should see two small squares.  Mouse over the squares and your mouse turns into a vertical head double arrow.  You can drag the mouse in the vertical direction to expand the service to include more inputs.

  Hope this helps,

• USB mouse

  Hello!

  I really need help here! I am trying to use my mouse as a motion detector... I said it is stupid, but... I WANT TO DO! I want to take his 'motion sensor' and place it near the door and... When the door opens the sensor becomes 'active '... I guess you know what I mean!

  Now, I have a USB mouse, but it is unfortunately unknown China shape mouse or something... impossible to find info on him.

  I need the most simple example on how to connect with the USB mouse... something like '0' when the mouse is idle and '1' when there was some movement in close proximity to the 'LED '. LabView has a few examples but far to complicated for me.

  I would be gratefull if you could help me!... at least one site with a tutorial for this kind of application.

  Thank you!

  LabVIEW tutorials

  A loop is sufficient. After the tutorials, you should know what a registry change is and how to use the comparison of functions (i.e. not equal).

  

• Windows 7 screensaver won't come on the use of wireless mouse

  I have Windows 7 and the screen saver does not illuminate.  I also use a Microsoft wireless mouse.

  Please read this tutorial from Microsoft Support:

  The screen saver does not start after the installation of a wireless pointing device
  http://support.Microsoft.com/kb/913405
  You must install the optional Windows called HID Non-User Input data filter update

  If you need additional assistance, please transfer Windows 7, performance and Maintenance to the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance?page=1&tab=no
  

• System freeze about 5 minutes after startup. Can move the mouse, but can't do anything else.

  Computer Compaq laptop turned on updates of Windows, firewall Windows, AVG anti-virus, etc.
  He has suddenly frozen 8 months ago - would not respond other than to be able to move the mouse.
  Does not "left/right mouse click" or "Ctrl + Alt + Del" or "power button."
  After a long waiting, pulled out the battery/power supply.

  Restarted in safe mode, was able to run AVG, but froze again.
  Has helped me select the AVG window and move it autour, but nothing else.
  Was not able to click with the right button on the taskbar to make appear the Task Manager.
  Only way to reboot was to remove the battery/power supply.

  Same thing, it is is happening whenever I start.
  System access for about 5 minutes and then freezes.

  I am able to get into the system at the start restore.
  Have a lot of personal photos on the laptop.
  Please provide a solution so that I can extract the photos and then restore the phone to factory settings.

  Thank you.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.Compaq.com/country/cpq_support.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Toshiba with vista touchpad mouse stopped working after the long sleep.

  I left my Toshiba laptop with Vista only for a few hours and when I came back I had a lot of difficult to resume. When he did power to the top of the screen is fixed to the external monitor, and touchpad mouse will not work.  I did a system restore to several days ago, but it did not help.  I also installed service pack 1 and 2, hoping that would be useful, but it did not.  What should I do to get the touchpad mouse works again? I have the back of the screen, but not the mouse.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista starts with a black screen with the mouse cursor

  Hello

  I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

  Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

  (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

  (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

  (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

  Could you get it someone please let me know how I can solve this problem.

  Thanks in advance

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't use my mouse pointer in windows 64-bit vista Media Center

  My mouse does not work in windows vista media center. I use the tab buttons, arrows, and the rnter buttons to get it to work but not the mouse. Is it possible to get the mouse working? I move the mouse, and if by chance I managed to get the pointer of the mouse under a button he highlites and I can then press the mouse button and it will work, but the mouse pointer is invisible.
  Is it possible to put the mouse in sight?
  Thank you for your help
  Whenever I use (64-bit) windows vista Media Center after it starts I can't use the mouse to move from one element to the element. I need to use the tab key, arrows and enter to do anything in media center. Is it possible to get to be able to use my mouse?

  Among other things, this suggests to disable 'Traces of the mouse', if you have it on might work.

  Tutorial Vista - the mouse cursor disappears in Media Center
  http://www.Vistax64.com/Vista-General/34749-mouse-cursor-disappears-Media-Center.html

  When Media Center is open, the mouse disappears in Vista Ultimate (RTM)
  http://forums.techarena.in/Vista-music-video/678304.htm

• Active window disappears when the mouse is moving quickly to the right

  Did not previously this same problem. I work in the window..., web page, word doc... accidentally push the mouse to the right... the window disappears, and does not reappear until I move the mouse in return. Buttons are not clicked, this only occurs in response to the mouse is moved rapidly to the right (have not tried quick moves to the left.) However, happens not every time, but several times a day. Very annoying. Happened since then that Windows 7 was installed. Thank you for the help

  I think that you are referring to the Aero Peek feature. See if OPTION 2 - turn Aero Peek On or Off with the Preview button in the task bar of office help in the tutorial below:

  Aero Peek - turn on or off the
   http://www.SevenForums.com/tutorials/838-Aero-peek-turn-off.html

  Kind regards

• Windows 7 Professional with white screen and the mouse cursor

  I have a Dell Latitude E4310 running Vista professional 7.

  It worked fine with no problem except when I turned it on this morning.

  He went through his normal boot sequence (Logo Microsoft...) and then instead going to my office for display, the screen stayed black with only my visible mouse cursor.

  I can boot into safe mode and my desktop is visible.  I don't know what to do at this point and would be grateful to anyone who helps.  Thanks in advance!

  Hello

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  __________________________________________________

  If that does not fix it:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• can not find how to run Sculpt comfort mouse on Windows 7, no option bluetooth not found

  I'm running in circles.  Control Panel does not appear to have a bluetooth option.

  Try to find the drivers to download?  thought this would be a wink

  Hello

  Thank you for giving us the opportunity to help you on the forum.

  I want to suggest to go through the link provided below where you can get the drivers, tutorial in PDF format and all important information about the comfort mouse sculpt.

  http://www.Microsoft.com/hardware/en-us/d/sculpt-comfort-mouse

  Note: Make sure that you download the correct version of the drivers from the links provided. If it's 32-bit then you must download the same version, or if you have 64 -bit , you will need to download the same.

  Try to follow the steps given in the following link to check what version of the operating system that you are using.

  My PC running the 32-bit version or 64-bit Windows?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows.

  Kind regards.

• Turn off the mouse pointer in the Web Widget

  Hi people.

  I have a web widget, however when you get a mouse pointer.

  Is there a way to turn it off and just make the selectable items?

  Thank you very much

  Jason.

  You have a tutorial on BlackBerry Development Knowledge Base:

  http://supportforums.BlackBerry.com/T5/Web-development/how-to-use-the-new-navigation-mode-in-a-black...