To access the network GoFlex drive

Similar Questions

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• "Could access the network location:.."

  I get the "could access the network location:. «error with installing and uninstalling of programs, i.e. iTunes, Quicktime.»»
  I checked the Internet and found registry patches, but they have not worked for me. I tried the Fix It program in one of the solutions, not good.  I also stop my firewall and anti-virus and tried to install it that way. no go.

  I have Windows XP, SP3

  any suggestions?

  I thought about it... have an external hard drive which I usually turned off when the use not. I tried to install everything with it on and it worked.
  Thanks for your help

• Cannot access the network using WiFi hotspot

  I have a lenovo ideapad z570 running windows 7 ultimate, processor intel pentium cpu B950 @2.10 GHZ 2 GB ram and 64-bit operating system. My problem is that when I create a wifi hotspot via intel my wifi technology, I so can not access the network on my android phone or the playstation 3. There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Original title: network
  

  There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Hello

  You try to use the Add-hock network so that you can access ac in android are as good as play station unit
  Like you would have checked in the id network properties material and device id, it yellow list means problem with driver, please try to update the BIOS and the driver appropriate with the hardware ID, if possible to install from the laptop power management

  IdeaPad Z570.please press fn + f5 and check the layout state of WIFI is turned on, current state should off
  Download these drivers and install it, then try again
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1WLN90WW5.exe

  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z370Z470/IN8STW09WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1MEI08WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1CHP30WW5.exe

• Must be able to access the network WPA PSK

  Hello

  I just got my laptop Satellite Pro L300. I have a sky broadband wireless router in my house and it works with my computer and my laptop roommates but not with the Satellite Pro.

  Phone heaven Support and they told me to tell you that my laptop is not recognising non secure networks and I should be able to access the network WPA PSK.
  What should I do?

  Kind regards

  >.. .but not with the Satellite Pro.
  Does that mean exactly?
  You see that this guaranteed WLAN?
  Can you put WPA password to have full access or what?
  What exactly happens?

• to access the network of vision builder error

  to access the network error VBAI

  It used to work yesterday but idon't know why not today

  So, you have problems writing to a published network shared Variable? You might be able to solve this by using the software manager system OR distributed. By using this software, you should be able to see all the network published static Variables that are hosted on this computer and all other computers on the network. You can try to modify these variables using this software. If you have the same problems with the variables shared by using this software, then this probably means that there are problems with the network in general as a firewall blocking the communication.

  You can check if you have this by navigating to start > all programs > National Instruments > Distributed System Manager. If you do not already have it, you can download it here: http://www.ni.com/download/ni-distributed-system-manager-2013/4216/en/.

  This knowledge base article may contain useful advice on how you might approach this problem: http://digital.ni.com/public.nsf/allkb/6E37AC5435E44F9F862570D2005FEF25?OpenDocument

  Good luck

  Jeremy P.

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• I can´t find the network controller driver. Is Hp 2000 - 2d09EE, 8 x 64 windows. Please can you help me?

  Hello

  I can´t find the network controller driver. Is Hp 2000 - 2d09EE, 8 x 64 windows. Please can you help me?

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  Direct link is here

  http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62425.exe

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• Update for the network controller driver

  I can't update the network controller driver for my Hp laptop, I use windows 7. Help, please

  This is the ID of the hardware:

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  CHN

  Hi chn14,

  Try this driver

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Can I cache of RADIUS credentials used to access the network devices?

  I would start by RADIUS to authenticate users who try to access the network through virtual private networks devices. Since we will need to access the equipment in the case of a VPN does not, I need to know if the credentials may be cached on the device.

  You mean devices are accessible once you have set up VPN. Failure VPN, you can even ping the network devices. I am assuming that they would be internal resources. In all cases, credentials may not be cached on the device. Let me know if I am missing any room in your questions. ~ Jousset

• Unable to access the network using Edimax N300 universal Wi - Fi extender

  Original title: Edimax Extender will not get internet access

  I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet.  They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network.  EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either.  Anyone with any ideas would be appreciated.

  Hi Gofchap,

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to access the network.

  The problem may be because of the Extender, diverter, or with the network adapter.

  1 did you do changes on the computer before the show?

  2. do you receive any error messages?

  3. What is brand and model computer?

  4. have you tried to connect without using the extender?

  I suggest you to visit:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Smartphones blackBerry 8310 and 8110 "attempted to access the network.

  Good day to all.

  In my application I m send and receive sms.

  It works very well in 8110 but in the 8310, while sending or receipt of the msg it always ask

  authorization "the appl." XYZ "has attempted to access the network. You want to allow this? "   .

  And if I press on no when you receive the msg then it never to catch the incoming msg again until I have leave the Apllication.

  Why is it so?

  Is this for safety reasons or '?'.

  Is there a solution to stop this.

  In 8110 it never ask such Question and works smoothly...

  Please help me solve this problem?

  Thank you & best regards

  Thakur

  I found the solution... I got my code... signature keys and my application is signed exception so not more security

• ESXI how to install the network adapter driver

  Hi all:

  My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

  Thank you very much

  Hello

  Follow the VMware KB for the installation of the NIC driver, hope it helps.

  VMware KB: Cards not detected on a host ESX ESXi network