MX200 reception calls mystery

Similar Questions

• question of tread compound, do not restore

  Hi all, this is my first time posting, but I really hope someone can answer this for me.

  I have a page that is a placeholder in the short term and instead turns into a nightmare in the long term!

  http://www.chuckaguila.com/dw_index03.html < you can see the page here, I composed reversals and they are tripping beautifully, but for some reason, will not restore the triggered event.  I restorations of image for both and tried to change several things but nothing works.  I'm sure it must be something simple, I'll get to later, but for now, I've lost too much productivity on this problem!

  Thanks in advance for your suggestions!

  Best,

  Sherry

  That's what we'll call "mystery meat navigation".  You have to mouse around to find places where you can trigger something happens - there is no clear indication where that might be.  I don't like.

  Notice is part of the restoration works.  It is the disjointed bearings restaurant not when you mouse over the trigger activates.  You can correct that explicitly adding an onmouseout swap to swap image image disjoint back to the original.  In addition, you must always apply behaviors to images by applying them to the anchor tag that surrounds the image.  Select the image, and then click switch to quick tag on the which is to the left of the , now apply the behavior.  Your bearings would then look like this-

  [email protected]"onmouseover =" MM_swapImage ('initial_view_r2_c1', ",'Images/current/email_r2_c1.png',1); "SwapImage MM_ ('initial_view_r4_c4',",'Images/current/email_r4_c4.png',1) "MM_swapImgRestore; "" >http://www.chuckaguila.com/Images/current/initial_view_r4_c4.png"alt =" "name ="initial_view_r4_c4"width ="264"height ="184"border ="0"id ="initial_view_r4_c4"/ >

  and you would have the added advantage of cursor pointer being used for this trigger rather than the default arrow.

  Your code explicit onmouseout would then look like this-

  [email protected]"onmouseover =" MM_swapImage ('initial_view_r2_c1', ",'Images/current/email_r2_c1.png',1); "SwapImage MM_ ('initial_view_r4_c4',",'Images/current/email_r4_c4.png',1) ' MM_swapImgRestore; MM_SwapImage ('initial_view_r2_c1', ",'http://www.chuckaguila.com/Images/current/initial_view_r2_c1.png' 1) '>http://www.chuckaguila.com/Images/current/initial_view_r4_c4.png" alt = "" name = "initial_view_r4_c4" width = "264" height = "184" border = "0" id = "initial_view_r4_c4" / > "

  If you want to be using tabular presentation, you should read this - http://www.apptools.com/rants/spans.php

• My Skype crashes whenever I'm doing first call/reception of the first call

  My Skype crashes whenever I do the first call or receive the first call. Whether by Skype phone or Skype to Skype.

  I have to sign out of Skype and then reconnect you for each call.

  Try first upgrade the Intel graphics driver to the version compatible with the system Windows 8.1 :

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/IdeaPad-p-series-laptops/IdeaPad-P500-...

  You still have Windows 8 version installed.

  Also look for other available updates:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/IdeaPad-p-series-laptops/IdeaPad-P500-...

• Reception of phone calls from a person claiming to be from Microsoft and informing me that I have not responded to the notice of my computer.

  One scam or not?

  I get phone calls from someone saying that he comes from windows and he tries to help me with my IP address.  He claims that I have not responded to the notice on my computer.  When I asked for a phone number to remind him to he gave me 516-628-7488 and I called and it sounds right.  Have I been scammed and someone is trying to hack into my computer?

  I get phone calls from someone saying that he comes from windows and he tries to help me with my IP address.  He claims that I have not responded to the notice on my computer.  When I asked for a phone number to remind him to he gave me 516-628-7488 and I called and it sounds right.  Have I been scammed and someone is trying to hack into my computer?

  It's a scam.

  I'm glad you don't fall for it.  All other calls suggest that tell you the caller you brought calls to the police who should dissuade continue to harass you.

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

• BlackBerry Z10 problem with reception and to make a call after updating to OS.

  I just updated my Z10 STL100-3 model with the new operating system 10.3.2.2168. Now, I can not answer incoming calls. The phone rings, but there is no screen to answer or reject the call. I am also unable to unlock while the phone is ringing. Once the caller hangs up the normal opening if Poster Advisor I missed a call and then allows me to unlock the phone. When you place a call, the screen does not change for me to end the call. In other words, I touch the contact and it will automatically start the numbering, but the screen does not respond or don't change to indicate that the call is made. Then I need to cut the phone to hang up!

  Hello and welcome to the community!

  Well, assuming that you have waited the usual 48-72 hours, with a lot of reboots (including the battery grips) and this behaviour is new, and the only thing that has changed is the operating system updated... so, the most common thing to do after an update which results in problems is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Unofficial methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval (unless you're on 10.3.2, in which case 10.3.1 and earlier are now blocked, but you should be able to use any 10.3.2 it's official):

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Good luck and let us know!

• Mystery calls the client with a company in the cell of the employee.

  My client reports that customer, calls are forwarded to his cell phone from the business telephony system. He describes what he believes to be the process as follows:

  1. visitors enter the main number of the company, which is associated with a script of the Unified Contact Center Express (UCCX).

  2. customers select form in the menu tree option.

  3. the customers are transferred SMS on the cell phone of the employee.

  The employee does not know which option to customers of the selection. When I look to the top of each DN in CUCM that is configured in the script UCCX, none of them are configured with a destination of the call forward. The problem does occur only a few times a week, but the employee becomes very frustrated. The only piece of information that I know for sure is the employee's cell phone number. Then maybe I could use it to search traces or logs. How would you suggest that I start to try to isolate the cause of this problem?

  Thank you

  ------------------

  CUCM 7.1.3

  UCCX 7.0 (1)

  ID start by watching CDR and the search for his mobile phone number

  Sent by Cisco Support technique iPad App

• Mail envelopes blackBerry Smartphones at the reception in direct connect calls

  Hello all, new to the forum!  Frustrated and look for the answerman! My carrier replaced my Blackberry 8350i with another assuming that was the problem.

  Well, when I get directly connect calls and do not answer them immediately and receive other calls Direct Connect, the message envelope accumulates 1 for one, whenever I get a new Direct Connect. But after completing the message counter does not and continues to accumulate Direct Connect calls and only Direct Connect calls. Emails, sms and others disappear or subtracted from the total after reading them. When I "clean up" the call directory is empty but the message envelope counter does not reset.

  1. message counter accumulates ONLY when direct connect through Sprint calls received

  2. I have not found a method to eliminate memory except by removing the battery

  3 deletion of call logs does not solve the problem

  4. the old Blackberry and other has the problem

  5. the latest version of the software loaded

  This can be corrected? It seems to me like a software problem? I have the latest updates of software loaded with no improvement.

  sqamicheal wrote:

  • This function cannot be executed ALT, CAP and DEL.
    

  huh? Did you follow the instructions as indicated... Shift to the RIGHT, which is the key to the CAP?

• Problems blackBerry Smartphones icon - icon shows I've got 9 emails - there is no emails in my box of reception, or missed calls

  I have the BlackBerry 9630 smartphone v4.7.1.40

  Recently, I went out of State and had not experienced this problem before leaving the State.  I was out in the glue and often not there where there was a signal to receive messages.  I noticed that my icon said: I have messages.  I saw a few and opened and deleted if necessary, however when I went back to the main screen, it says that I still had 7 messages.  There is no unopened messages or missed calls.  I looked in all the missed messages files and that you have not found a.  Is there a way I can reset my icons?  Is this a known bug?  My SMS icon and icon facbook work perfect so far.  Please advise?

  Try the method in this article to reset the icon

  http://www.BlackBerry.com/BTSC/KB14568

  Alternatively, you can try to perform a hard reset if you have not already. With the machine on, remove the battery for 30 seconds and replace it. See if the icon will reset once the device to finish starting up.

• BlackBerry torch Smartphone click when I incoming calls from reception - even when silence

  Anyone else have a problem with the BB Torch clicking when an incoming call is received?  This occurs even when my bb is on silence.  How can I stop it?

  Not a problem, if you have any problems or questions, we're always here in the forums.

• Help! Mysterious exception during load tests (call on a cache item)

  Under load, we are witnessing the track below: DistributedCache$ BinaryMap.onMissingStorage is thrown an exception.
  
  We do:
  o = nc.invoke (cacheKey, proc);
  
  If the key exists in the cache (it's a control block that is reused over and over).
  
  It started just show up under load.
  
  Anyone know what this means?
  
  ----
  
  Configuration: 2 storage nodes, 15 client and JMX nodes, each node storage on its own machines, other nodes distributed on 4 machines.
  
  -Follow-up of the newspaper:
  
  
  java.lang.RuntimeException: Service ended
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.onMissingStorage (DistributedCache.CDB:9)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.invoke (DistributedCache.CDB:20)
  to com.tangosol.util.ConverterCollections$ ConverterInvocableMap.invoke (ConverterCollections.java:2110)
  to com.tangosol.util.ConverterCollections$ ConverterNamedCache.invoke (ConverterCollections.java:2565)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.invoke (DistributedCache.CDB:11)
  at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
  at com.tangosol.net.cache.NearCache.invoke(NearCache.java:413)
  to ourstuff. MultiSeqCacheUtils.doEnqueueAndUnlock (MultiSeqCacheUtils.java:360)
  
  ...

  Hello

  Ideally, needs to see all newspapers to try to make specific decisions, but there seems to be enough to see in charge of the communication delays

  2010-03-10 06:50:15.830 [consistency] [WARNING] [Logger@9233091 3.4.1/407] [] 2010-03-10 06:50:15.821/10439.291 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 14): * have experienced a delay of communication ms 16849 (GC distance likely) * member (Id = 10, Timestamp = 2010-03-08 03:12:04.382, Address = xxx.xxx.xxx.17:33392, MachineId = 27153,

  2010-03-10 17:10:00.488 [consistency] [WARNING] [Logger@9233091 3.4.1/407] [] 2010-03-10 17:10:00.361/47623.831 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 14): experienced a delay of communication ms 12745 (GC distance likely) with members (Id = 10, Timestamp is 2010-03-08 03:12:04.382, Address = xxx.xxx.xxx.17:33392, MachineId = 27153, rental = site: yyy.yyy, xxx04, process:15007); 78 packets reprogrammed, PauseRate = 0.0015, threshold = 1250

  2010-03-10 17:37:55.879 [consistency] [WARNING] [Logger@9266502 3.4.1/407] [] 2010-03-10 17:37:55.879/49281.934 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 17): timeout while offering a package; asking the confirmation of departure for Member (Id = 3, Timestamp = 2010-03-10 03:45:03.816, Address = xxx.xxx.xxx.16:33390, MachineId = 27152, rental = site: yyy.yyy, xxx03, process:22060)
  by the member set (size = 2, BitSetCount = 2
  Member (Id = 2, Timestamp = MachineId 16:57:00.681, Address = xxx.xxx.xxx.17:33389, 2010-03-07 = 27153, Location = site: yyy.yyy, xxx04, process:4977, Role = PegsRvcUswRvcUswAdapter)

  These initiated very long communication delays probably death detection logic. There are a few possibilities for the delay. GC is a likely scenario and would need more logging to confirm information. Often the pile is not big enough and JVM spends time trying to free the memory. This is a link to a control area which includes a section on the JVM tuning including GC Monitoring & Performance Tuning

  http://coherence.Oracle.com/display/COH35UG/performance+tuning

  Increase can help and is documented as follows:

  The maximum time one or more nodes can be insensitive before be removed from the cluster is configured using the
  subitem of and by default a minute for production configurations. This increases
  value will allow the cluster to wait longer for connectivity to return. The downside to increase this value, it can also take more time to handle the case where a single node has lost connectivity.

  There is also an entry in the forum with a nearly identical stack dump, the only exception is the use of 3.5 of coherence which introduced the function of guardian of coherence.

  Re: Command fails only under high load and cache APP store.

  In this case, the APP store is reported as a bottleneck and reducing the and the increase has helped reduce this bottleneck.

  Dave

• Poor iPhone reception 7 more

  Hello

  I've recently updated to iPhone Plus 7 and I get horrible reception, people cannot hear me or I sound muffled, (I had no problem on my 4S or 6 more).  My provider is the same, Bell Mobility to the Canada and I use the phone I did the others, there is also no case on the phone.  Sometimes, I noticed the signal bars in every way, I know that this isn't an exact science, but they've been very erratic.  For the most part, I hear I'm talking about, but people have a hard time hearing me, everyone has noticed poor call on their iPhone is received 7 more or have a fix for this problem?

  Thank you

  JD

  Hi, jdtouchie!

  Thank you for using communities in support of Apple and congratulations on your new iPhone 7 more! I understand the basis on your post that you had some problems with the service company and audio quality for calls from the establishment. I know how it is important for your new iPhone to work as expected, and I'm happy to help you!

  Since others are having some difficulty to agree on calls, I would recommend going through the following article.

  Get help with microphones on your iPhone, iPad or iPod touch

  To answer any question you have with the service, I recommend the article below.

  If you cannot connect to a cellular network or cellular data

  Have a great day!

• iPhone 6 s - calls after update to iOS10.0.1

  I have a 6 s iphone, I put it to update iOS 10.0.1 and since then, I have problems with the reception or make phone calls. When I make a phone call and the other person answers, I can hear them but they can't hear me. In order to hear me, I have to press the speaker on the screen. I have already reset settings it but still have a problem.

  No idea what is the problem?

  Re-start.  That's the answer.

• My phone, when I try to call, the volume seem to be so slow than normal, what happens after I have updated my phone, whenever I wear my scarf that I barely hear anything... Any solution? Thanks in advance

  My phone, when I try to call, I could barely hear the voice of the speaker, even turning on the Mono Audio, I rebooted the phone but nothing, this problem occurs after I updated the ios 9.3.5 aka the recent, so any solution pls response asap thx in advance

  Hello, dzharun!

  Thank you for joining the communities Support from Apple! It seems that you encounter to the appellants the hearing in question on your iPhone. I know how important it is, you are able to hear callers. Restart the phone and adjusting the audio are very advanced! Read this article If you hear not a person on an appeal or a voice messageor if the sound is not clear on your iPhone. Since you have tried reboot, find out exactly as follows:

  Turn off the receiver

  The receiver of the iPhone will not work properly if it is blocked or dirty.

  Follow these steps, after each:

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

  Also, check out this article with links to learn more: get help with hardware on your iPhone, iPad, and iPod touch features. It has links to articles for several steps to help with issues with the receiver and the speaker.

  See you soon!

• OtterBox interfere with reception? (iPhone 6)

  • iPhone: 6
  • Carrier: Verizon - reception home *.
  • Case: OtterBox Defender series

  Deleted my OtterBox to clean an area of my house that reception is usually in a bar (dot, regardless). I looked at the lock screen and I got 3 bars. Make a call from this place. My friend heard me perfectly.  I walked around my house, which previously, the call dropped everytime. Yet once, my friend heard me perfectly all the time without loss of connection, no sizzle, no noise at all. Asked about the decline in coverage (before today) Verizon said I must be in a pocket with the interference of the tower and they tried to sell me their in-home services.

  • ONLY difference today: deleted Otter Box. No trees cut, no new turn in space, without whimsical wind, any sharp fall in the foliage.
  • Research: Articles I've seen are old (2012, 2013), refer to the older phone models, saying the OtterBox does not interfere, but I don't see any other explanation.  Is this a problem for someone else?

  There is nothing in an Otterbox case which would interfere with RF reception. It is possible, I suppose, that there is some minor problems of the material with your phone, which is aggravated by the case put the pressure or torque light somewhere. I make an appointment at the Genius Bar at your local Apple store and show them the problem.

• call phone iphone 5 s problem

  When I get my call, the phone vibrates for 8-9 seconds and I hear nothing. also while making calls, I don't hear anything after my call at the other end. Sometimes, the phone freezes at the call log filtering after making the calls too. I reset the network and phone settings. but the problem persists. What should I do?

  Hello placidsantosh,

  Thank you for using communities of Apple Support. It is my understanding that you are unable to hear through your car radio iPhone when on a call. I can certainly understand your concern. I'm happy to help you.

  You did a great job trying to fix this yourself! The receiver of the iPhone will not work properly if it is blocked or dirty. Please try the following steps to remove the receiver. Test the issue after each step. :

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone

  If the problem persists, please follow the steps to test the receiver in the "Check the receiver" section in the link above.

  Have an amazing day.