MX870 print head U052 problem

Similar Questions

• Canon MX870 printer under Win 8.1 prints pages in the wrong order

  I'm transition to Win 8.1 Vista.  I have a Canon MX870 printer with the problems of the order of the pages.  With my printer settings exactly the same as on my Vista, Win 8.1 machine print a multipage document insists on treatment of printing a document to the rear.

  For example, to set the printer as I always FEEL OF LAST page, he treats the last page on the first page of the document.  So on a document of 3 pages printed double-sided, pages 2 and 3 are back-to-back, and 1 page is blank on the back.

  When I undid the IMPRESSION OF LAST PAGE setting, it made no difference.  He has always treated the last page as if it were the first real page of the document.  I went on the Canon site and nothing struck me re a fix of the problem on their own.

  Ideas?

  Auggy - I got it!

  I didn't understand at first what suggested you because I had done all this (I THOUGHT!) but the design truly Byzantine Word 2013 defeated all the logic I had previously applied.

  The very way which is less intuitive word 2013 works is that it separates the printer between windows Canon printer commands and window, under Options, advanced with the printer controls the latter taking precedence.  So no matter what I tried in the print window of Canon, Word 2013 would not allow it to take effect.

  WHY IN GOD'S CREATION WOULD WORD 2013 DESIGNED THIS WAY?

  In any case, after three visits to the Options Word 2013--> window advanced (at the bottom of this window, so it is not visible at first sight), I realized that I need to uncheck command-last-page to print the word 2013.  Print-last-page Canon is taken into account that accepted.

  Damn!  Why did do so absurd?

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• HP Officejet Pro 6830, model 6: print head problems

  Have an Officejet Pro 6830, model 6835.  Error message received saying this printer had print head problem.  Also the error code oxc19a0020.  Troubleshoot-carried out every day to solve the problem without success.  Reset, change cartridges, activated and deactivated (including source) and nothing has worked.  Bought on 23/04/15.  Only three months old.  Help!

  Hi, I would advise to call HP support immediately about this, as it is likely that you will need a replacement printer.

  Can you please let me know how you go?

  Thank you

  Ciara

  

• print head problem Officejet 8500 has

  Hello

  I just replaced all my ink cartridges, and still it tells me that there is a printhead problem; the message says to replace the printhead to resume printing.

  Didn't I do it when I changed the ink cartridges?  Visual instructions on the printer seems to show a slightly different model of what I, and the print head seems to be separate.  It does not have to be the case in my model.  Anyway, the instructions also say press the button 'change print head' in the main menu, I can not even to the main menu but it is stuck on the message "print head problem".

  I'd appreciate some advice on how to proceed!

  Thanks in advance!

  

  This picture help?

• Print head problem

  Hello

  I followed the instructions for print head problem for my HP Officejet Pro 6830. However when I tyr to connect a job I get the text next message "this product is is more served by HP." You can search for possible solutions on this Web site. »

  What can I do else?

  @Anniepannie17, try this url.

  http://WWW8.HP.com/au/en/contact-HP/phone-assist.html

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• HP Officejet Pro 8600 Plus: problem of print head

  Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it working the first time but then after a few days print message pops up again. The message won't let me come back to the homescreen on the printer.  I took it by a realignment and the printer prints a test page. If the printhead has been the problem, then I thought that he would not be able to print a test page. Any suggestions?

  Thanks for your support Gemini02.  As well as through the HP recommended diagnostic tests I blush as the printhead to hot water, but still the same message. I also downloaded and reloaded the drivers, but to no avail.  The machine is 3.5 years old and so I came to the conclusion, it exceeded its use by date.  The cost of a new print head is $ 70 while the printer, HP Officejet pro 8600, is now manufactured and was replaced by the Officejet pro 8620 which sold $275 by HP.  HP said that because of the age of the printer, there is no guarantee that a new printhead will not solve the problem.  I then bit the bullet and ordered a new printer.

• Potential problem of print head

  I use a HP Officejet L7780 printer.  The printer is in my house in the Southwest.  I'm missing the months more hot 6 (May - October), so I keep the internal room temperature does not exceed 86 degrees.  The printer is off in these 6 months.  When I got home, the printer was printing not every black line.  Naturally, I though that the black ink had dried up given the hot temperatures inside the House, so I bought a new black ink cartridge.  Who has not solved the problem, so now I suspect the Black/Yellow Printhead.  I removed the print head, cleaned up as suggested and reinserted.  Now I get the alignment error failed on the printer.  I followed the instructions to fix this error, but nothing seems to solve this problem, so I suspect the print heads may not because of the intense heat that they have been exposed to six months.  Does that seem reasonable? I didn't buy new print heads if this problem was caused by something else.

  If the heart is the source of the problem, so should I remove the ink cartridges and the printhead of the printer and store them in a cool place for 6 months, that the printer is not used?

  Yes, you can store them in an airtight container under normal room temperature. That should be fine.

  I ask you to mark my post as the Solution so other users with the same issue can benefit from this thread.

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• HP Photosmart C6380: print head problem

  I just replaced the ink cartridges in my printer and a message pops up saying (printhead problem remove all the cartridges, then lift gray latch and printhead, and then reinstall the cartridges and print head) I did it a dozen times now, and the message is still there, what should I please

  Hi @PC21,

  Welcome to the Forums of HP Support!

  I understand that you are at the reception and the error about the print head on your printer HP Photosmart C6380. I will definitely do my best to help you.

  I would like to try the steps in this guide, the 'Print head problem' or "print head seems to be missing or corrupt" message for HP Photosmart C6300 all-in-One Printer Series.

  In addition, you can try the solution in this video. Use at your own discretion.

  Videos: 564 HP & HP 920 ink printers of the series - printhead to hot water Flush.

• With print head problems

  The guarantee statement in my manual says that print heads, when the customer replaceable, are warrenteed for up to one year. What I have not been able to determine, if the Photosmart 5510 is such a machine? 5510 customer print heads are replaceable?

  Hi FitnessGeek,

  In general, here's coverage options.

  1. Self-help through searches using HP troubleshooting documents found on the HP site or using the HP Forums, you did.
  2. For many printers, the user can pay phone support to try to help solve the problems.  It does not cover the material.  Because it looks like you have a hardware problem, it probably wouldn't be a good option.
  3. For many printers, upgrade options available there.  These printers can be slightly used certified refurbished HP printers that have the one year warranty.  They will look and act like a new printer.  If you decide to check in this option, be sure and ask the agent on the 1 year warranty for $1.00 for improvements.  So for $1.00, you can have a full warranty on the printer for 24 months from the date of purchase.  For more information contact HP worldwide .

  Let me know if you need more information.

• Dell V515W print head problem

  My printer has stopped working.  "I'm getting a ' there is a problem with the printhead" error.  I've cleaned and deep cleaned the print head.  Just before it began, my pages were all blue print.  Now, I can't clean clean/deep/align or anything because of the error.  The print head is not available for purchase from Dell.  The printer is 15 months old.

  My printer for several days would print my empty document.  First printing color stops working then stopped printing black. I followed all the instructions of the printer, and nothing happens.  On my screen of the printer, it keep saying: "does not." Insert a new print head.  I call dell (1-800-624-9897) and had them take over my computer to solve the problem with my printer.  The representative did a job through and found no problem.  They send me another printer in 5 bus. days. The print head is the problem.  Where can I buy new printhead in the future?

• I have the print head and the alignment of the problems with our officejetpro8500 910 a.

  We noticed that the cyan ink was not printing. The product is out of warranty about five weeks before we noticed a problem. We have replaced all the ink with the new hp ink cartridges. We have tried printhead cleaning several times until the third level cleaning when cleaning the print head has failed. We tried to align the printheads without success. We have been dealing with this during more than a month now. We have only 440 pages printed during our first page of self-test diagnostics. Our print head shows that it is under warranty until April 4,2012. We consulted a repair center. We have exausted all the other options until the replacement printhead. We changed to print in black only. Now, she wants to print a test page everytime we try to print something. Ink, we bought at costco for this printer was a third of the price of a new model of 8600. Please help before my wife beat me with this printer!

  If the printhead says it expires April 3, 2013, so the date of warranty.  You should be able to get a replacement print head by contacting technical support of HP and good news, it should be free, since the part is under warranty.  You can join the 1-800-474-6836 technical support to the United States and the Canada International users click here.  Let me know what happens.

• OfficeJet Pro 6835: Print head problem

  Getting the message print head problem. I checked guaranteed, says it is active, but when I click on contact HP support, I get the following: "this product is is more served by HP.» You can search for possible solutions on this Web site.

  It absolutely won't let me access a form to fill for the customer support, nor give me additional info on how to solve this problem. Any suggestions?

  Step 4 don't give me the phone number and the file number. This option is chat or twitter. Waiting for chat now. Do you have an indication that the warranty was until December 29, 2016.

  Edit: Cat ordered a replacement with an order number, so I think we can close this.