my cd rom is not my work computer is 2 years. No music cannot be played on this computer

Similar Questions

• DVD - ROM is not on my computer

  Hello

  I have a little problem.
  If I start my noteboot the DVD device is not on the workstation.

  You ad is very short and that's why I put t understand your problem.
  Could you explain first what laptop you have, OS and what s wrong?

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• my cd rom is not seeing the place on my computer and not work and see the error on my list of pilots code39

  my cd/dvd-rom is not showup on my window and also see the error on my driver code39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

  How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

  I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

  HELLLLLLLPPPPPPP!   Thank you!

  x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

  My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

  Hello gargoyle28m,

  If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• My CD-ROM/DVD-ROM does not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4. I tried the microsoft fix it downloads and it has not solved the problem.

  Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

  Grateful for any advice...

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD ROM not showing drive is not in my computer.

  My CD Rom drive not displayed in my computer. However, it is displayed in the Device Manager. I can't play any CD at all. The reader has to be able to run to it because it opens and, of course, present in the Device Manager. I already tried to reinstall the driver for him and it did not work. I'd appreciate any help, thank you.

  I opened my computer and a cable is not attached to him. My apologies for the error. Works like a charm now. :)

• CD Rom is not working

  Original title: fradz

  the cd rom of my laptop was suddenly stop working I look only a movie on CD and when I check in the Device Manager, the name of cd/dvd-rom was not in the list, but if I connect my external hard drive to cd/dvd rom will appear in the list of the device manager.i had a sony vaio VPCEH1AFX can you give me some advice so how can I solve this problem. ? Please write to me * address email is removed from the privacy *.

  Hello Arnie,

  I would be grateful if you could answer the following question:

  (1) you get an error message / code?

  (2) was there any software or hardware changes made on the computer before this problem?

  Your CD or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or a DVD. This issue would have occurred after you installed, uninstalled or updated a program or you updated Windows.

  Follow the link below troubleshooting methods and check if this may help;

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Satellite A30 - CD-ROM does not work correctly

  My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?

  Looks like catch 22. Someone at - it help him?

  I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.

• Equium A100-299-CD/DVD-ROM does not work

  My CD/DVD-ROM on my Toshiba Equium A100-299 won't work, do you have any idea why?

  I tried to fix it by changing the IDE secondary channel IDE ATA/ATAPI in PIO Mode only, but it doesn't seem to work...

  I get famous I I/O-warning, whenever I try to open programs and DVDs on it. But it works when I put an audio cd...

  Hello

  If all goes well it s not a malfunction of the equipment.
  We should be optimistic ;)

  Check this box: go to the Device Manager and remove the drive from the device.
  After restarting again, the operating system should recognize and initialize the disk again.

  In addition, you can try to clean the lens gently and carefully, maybe it helps

• Memory micro SD card works on phone, but not on the computer, Please HELP!

  Help, please

  History
  (1) I got a 8 GB Micro SD memory card, it worked fine for two years and then became corrupted, I formatted and it worked fine for about two months before, she has become corrupt again
  (2) this time when it became corrupt my phone always accepted, but the computer could not detect, weird, I decided to not format and continue to use on my phone
  (3) I decided to buy a new memory card and an adapter and then transfer the stuff over the old to the new, but I was shocked when the NEW memory card and a NEW adapter did not work and continued to say needs formatting, hmmm...
  (4) I decided to format it, but it says that it cannot be formatted... WHAT!
  (5) I put the new card in my phone, it works and I have format it on my phone instead... IT STILL DOES not work! Help me!!!

  I still think you should get a new card reader.  The adapters are not likely to be the problem.  On the other hand, I had a player go bad and yet still be "recognized" by the computer.

  It is possible, but probably not - IMO that reinstall the driver (if available; in general, however, these devices use drivers that come built-in to Windows) or a firmware update (if available for your drive in particular) could solve the problem.  What is the brand and model of your card reader?

  At the very least, you should see if you can find someone with a SDHC card reader and then see if you can read and format the card using your cards.

• 19 CD rom error code... computer does not recognize, etc...

  19 CD rom error code... computer does not recognize, etc...

  I tried troubleshooting and I get "unable to set of troubleshooting."
  Please let me know if someone has a possible solution.  I am running Windows 7 family and probably a 5 on the computer.
  Thank you
  JDub

  Hey JDub,

  Please contact Microsoft Community Forum!

  This issue would have occurred after you installed, uninstalled or updated a program or Windows.

  19 code means there is a driver conflict such as two devices attempt to use the same resources.
  
  

  When you say "unable to set Troubleshooting" what Troubleshooter you are referring to?

  You can try the steps from the following link and check:

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Keep us updated on the State of the question

  Using the windows-related issues feel free to post on the Microsoft Community Forum!

• Aero is not working is not in my computer running windows 7 Professional

  Aero is not working is not in my computer running windows 7 Professional. My computer config is Intel pentium 4, 1 GB ram, 120 GB HDD, no graphics card, mercury mother board (PI865D7) and my display driver software only works for XP. I used Vista previously, the aero effects worked perfectly in that.

  When you ran the Windows 7 Upgrade Advisor before upgrading to Vista, not it said you you had a potential problem with your graphics card?

  Your mercury PI865D7 mobo uses the Northbridge Intel 865GV chip / 865G for graphics.  According to Intel, no Windows 7 driver available for this graphics controller.