my laptop will not read my CD or DVD

Similar Questions

• HP Envy m7-k211dx: laptop will not read the charger

  My charger started acting funny the other day my computer laptop would not load that I plugged my charger into the port, it does not seem to meet that he is in charge, I thought maybe it was the charger. My mother went bought a charger from Walmart (not the same charger company), it seemed to work, he charges the day after the day it was fully charged, I used it all day until my battery was about to die, I got the notification saying 12% going to charge your laptop, so I plugged it. It seemed to work but there was a yellow sign on the battery icon was not supported but I kept the laptop that is until I have taken as a charger when it just turned off. He died now when I try to put on I see white, flashing lights, so I don't think it's a battery problem, I just can't load, when I plug the Chargers none of them seemed to work. There is usually a flashing orange indicating that my laptop is supported, it does not show that when I plug the charger in, now my phone is dead and I can't activate it please I need help. side note: I've tried and tried everything and no my port of loading is not loose when I plug, please help someone

  Hi @Clovis713,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that your notebook does not start on battery or AC adapter / CC. Have you tried to remove the battery and the only power of the AC adapter?

  Also, here's a document can help: HP Notebook PC - computer won't start (Windows 10)

  I would like to know whether the measures of assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• HP Envy m6 laptop will not read the sandisk

  SanDisk is a micro SDHC 16 GB. I put it in the memory card slot and it does not read / record it. Other maps of memory work very well. What should I do?
  
  Thank you.

  Hello

  Very simple: do not use this Sandisk card. I posted my experience before, we paid nearly 1 million dollars for 4 units MDS9000 and none of them can read cards greater than 2 GB.

  Kind regards.

• Computer HP laptop will not read my DVD more?

  I have read a DVD last night successfully. Today, I'm trying to play the same DVD again, and it seems that my phone does not read the DVD. I tried out the DVD and reinsert, restart, closure. Don't know why it won ' t play?

  Hi SolMorales,

  1. don't you make changes on your computer before this problem?

  2. you receive messages or error codes?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• Satellite M30: the drive will not read or burn a dvd - rw - Xp SP2

  I have my carpet and M30 * one dvd not read or burn dvd - rw. Tried driver implemented to date, but without operating. Help, please!

  Hi Khalifa,

  Until you can play a DVD - RW on your M30 the DVD must be finalized. In order to record on a blank DVD - RW the drive must be formatted first (using something like Nero INCD). If all goes well, then you should be capable of both wathch and burn DVD - RW discs. :-)

  Kind regards

• My Advent KN1 series laptop will not read the SanDisk micro card on my mobile

  ADVENT 6001

  Hello Yamaha03,

  Thank you for your message.  This happens with all the cards that you are trying to read from where is it just this one?  We need the problems if the port/player card on your computer could be the problem.  If your computer has a built-in card reader, go to your computer manufacturer's website and download/install the latest driver for your card reader.  Please let us know if this or help to solve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• DVD rom will not read the original (only) dvd.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  ====================================================
  If it is a recent issue, it may be worth trying to do
  a system restore to an hour before the beginning of the question.

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  More info...

  The free VLC Media Player may be worth a try...
  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• my cd/dvd will not read my cd or dvd

  I don't know what's wrong, but it was working fine the other day and now she even read my cd that looks like it would start the habit and then just stops. I think I have a problem driver, but not sure. I have a dell insipiron 5040. any help would be appreciated!

  Hi Richyk,

  I appreciate the time and effort you took to resolve the problem. Please check the steps to manually remove the filters:

  Remove the filters

  1. click the Start button, click on the start search box, type regedit in the box, and then click OK.

  2. in the registry editor, expand the following registry path:

  3 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class

  Note:

  To expand the registry path, click on the plus sign (+) next to each node in the left pane. When you click on the plus sign, the node expands and the appropriate registry subkeys are displayed under the node. In the registry editor, the registry subkeys appear as folders

  4. under class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  5. in the right pane, click upper filters, and then click on remove.

  6. click Yes when you are prompted to delete the registry value.

  7. in the right pane, click low filters, and then click on remove.

  8. click Yes when you are prompted to delete the registry value.

  9. close the registry editor. To do this, click on quit on the file menu.

  10. restart the computer.

  Note: Its is advisable to make a backup of the registry before making any changes.

  Please follow these steps and let us know the results, so we can advise you further.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• Tecra A2 - Mat * one reader not reading/burning CD or DVD

  Hi all

  My carpet * a drive does not work on my Toshiba Tecra A2.
  I am using windows XP and the drive is UJ-820 s serial number.
  It does not at all, will not reading/burning CD or DVD

  Any help would be massively appreciated

  See you soon,.
  Jim

  Hello

  It seems its time for a new CD/DVD drive :(
  To me it seems that the laser of the ODD lens does not work as it should eventually it s affected and cannot calibrate because of the stress of the material
  Therefore, in my opinion you a replacement drive are necessary.

  Notes; You may not use any CD/DVD drive. You need a compatible due to different master/slave/c-salt settings.
  In your case, I would like to get in touch with a local ASP and I ask for a compatible player.

• Satellite L30: reader will not read CDs or DVDs

  In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
  It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

  Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

  Hello

  The drive problems are not uncommon and may still occur.
  For the most part the purpose of calibration training does not work correctly.
  The objective must be calibrated in the correct position until the player will read or write to the media.
  This fault is not reperable and especially the drive needs to be replaced!

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• My hard drive will not read discs! What should I do?

  My laptop will not recognise discs I put in the forest of cd! I am trying to install Microsoft Office, and it will not even read the disc! Are there other ways of installing Microsoft Office? Or any suggestions how I can get the t hard drive work?

  Thank you

  Any comments would be much appreciated!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.