My MacBookPro early 2011 screen 13inch goes black

Similar Questions

• Satellite A500 - screen suddenly goes black with a continuous noise

  I have a Satellite A500 age of 2 months - so I'm working on it, screen goes black and there is a continuous noise until I have shut it down manually. What happened a couple of times. No error message.

  I just know that if anyone had this problem or knows what it is before you contact the retailer or Toshiba, if this is the best route to go.

  Thank you

  Hello

  I also own a500 but isn't a problem like yours. I got a blue screen and stop message driver responding. Have you tried to reset to factory settings (F8)? also try to update a graphics driver:

  http://www.nvidia.com/download/index5.aspx?lang=en-us

  http://us.download.nvidia.com/Windows/197.16/197.16_notebook_winvista_win7_64bit_international _ whql.exe

  It is not the page of the Toshiba driver from nvidia.com. I installed it a month ago and given that everything works great. I don't know if this can help, but try.

• Re: Satellite L500-19 X - screen keeps going black

  Hello

  I have a Toshiba Satellite L500 - 19 X and continues to go to the black screen.

  When you start the computer it flashes briefly until start / Boot screen properly before going black right now. Sometimes, the image is displayed correctly for 3 or 4 minutes before also black.

  If you hold down / tilt the screen under a strong light you can see a preview of the ghost of what should be displayed and if you connect an external monitor to the external monitor works fine and you can see a black ghost of what is on the external monitor on the laptop screen.

  I tried to reinstall the drivers, but it had no effect.

  Do you think I should replace the screen inverter Board or just reconnect the connectors screen?

  Thank you very much for your advice.
  Concerning

  Al

  Hello

  First to solve this problem, you must disassemble the laptop.
  I put t know exactly the procedure step by step for the L500 series but this procedure isn't very easy disassembly and you could damage other parts.

  Back to the question.
  It seems that the graphics card is OK and the problem is with lighting.
  Satellite L500 was equipped with a FL inverter Board and LCD joint (no backlight).
  The FL inverter controls the level of backlight screen s and I think that in your case, this part is defective.
  To resolve this problem, he needed to remove and replace the s FL inverter.

• Acer Aspire V5 - screen keeps going black - and the PC is not asleep

  Hello Acer community

  I experienced a few problems recently with my Acer Aspire V5, I made a return to factory settings (full erase).

  I came home today and maintaining the current black screen, even if the computer is not asleep.  I move the mouse and I see the office, but then after less than a second, it goes black again.

  There is no applied screensaver.  It's probably user error, but someone else knows this before and if so, how can I fix without having to go to the repair shop.

  Thanks in advance

  Just in case someone else has the same problem, a few reboots and an update seem to have solved the problem.

• Gateway vista laptop screen keeps going black several times!

  I need Urgent help please. I have Windows Vista Home Premium x 64 Service Pack 2 on a Gateway laptop with model number MD2614u. Whenever my charger is plugged into my laptop, and I'm trying to use my laptop, the screen goes very dark (you can always sort of see it, but its really dark able to work with the laptop). This happens immediately after that I open the lid of my laptop. In order to get rid of the darkness, I close the lid of the portable computer, reopen and instantly the screen goes black again. When I don't have my charger plugged in, this problem will not happen. I also tried the system restore, that does not solve the problem. I appreciate help guys, I really need my laptop works again. For any other information on the laptop required, please ask. Thank you! :)

  Hello draining12aol.com,

  I suggest that you update the drivers for the video card on your computer and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check Event Viewer to see if there is not related to the failure of the system logs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can see the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• HP pavilion dv6 - my screen randomly goes black

  Until recently my Hp dv6 Clubhouse has had some problems. It started about 3 months ago, the screen started flashing when I had on the lowest brightness. The countinued problem until today, but he arrived at the point where the screen goes black and I can't do anything. I updated my video card and it still happens. Also when I play games it becomes black as well. What is the problem? My laptop running Windows 7.

  Hi UberPwnz. What is the model number of your laptop DV6? What version of Windows is installed?

  : http://support.hp.com/us-en/document/c00033108
  : http://windows.microsoft.com/en-us/windows/which-operating-system

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• 15 "MacBook Pro early 2011 screen and use failure, horizontal lines, edges off the coast of the center of the screen

  Hi there-

  recently worked when all of a sudden my screen turned to a variety of 'snow '. After about 2 seconds, he stopped, but the screen was seriously messed up. Horizontal lines apart a few millimeters, but the lines look as if they were moving a little. In addition, the edge of the screen is now near the Center, rather than on the edge of the physical screen. So, there is a black bar halfway in the screen which cut into 2.

  It froze the computer as well, if I pressed the power to restart. It loaded very well through the screen of apple, but as soon as he hit the login screen, he returned to no usable lines. Cannot get back in.

  Anyone that prior experience, or know what I can do to get out of trouble? Looks different from most other 'horizontal' issues I found in searching.

  Photo attached.

  Thanks and best,

  Curt

  

  

  See MacBook Pro 2011 for graphics problems repair Extension program.

• Screen keeps going black on Satellite C series

  This is my second toshiba, first of all it has been with me for years.
  I have a new a satellite now c series but every now and again the screen goes all black.
  I found the only way to recover from this is to turn off and wait 60 seconds before returning.

  I can't find anything in common between the situations when this happens.
  I googled the problem and there seems to be a problem connecting to the screen on some models.
  Is it my problem or is it something else?

  Could you provide some essential information first?
  It would be useful to know what model of laptop and what system you have exactly.

  Have you checked the laptop for external monitor?
  If this isn't it. It would be interesting to know if something would be visible on 2nd screen while the internal screen is black.

• After the windows welcome screen just goes black?

  After that I entered the password for my laptop, it remains on the Welcome screen. After some time (sometimes) it will move past and I just black. The mouse still works and the cursor can move. No page loads later. I use Windows 8 and this happened for some time. Sometimes this will be repeated but other times it works just as usual. Any suggestions? Please help as soon as POSSIBLE.

  Hi Zachary,.

  This may be a problem with your display drivers.

  What is the brand and model of the PC?

  As you face this problem at random and since you are able to start the office, I suggest you follow these methods and check if it helps.
  Method 1:
  Updates driver may be available through Windows Update.

  To check the updates of the driver,

  (a) at the start screen, type Windows Update.

  (b) click and tap settings on the right side of the screen, then select install optional updates in the results on the left.

  (c) when the Windows Update Control Panel opens, click on Check for Updates on the top left corner to receive a new list of updates.

  
  

  
  Method 2:
  If no updated drivers are available through Windows Update, see the website of your video card manufacturer to see if they have updated drivers available.
  Install the driver yourself
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Tecra 8100 - screen goes black sometimes

  Hi members,
  I recently got a Tecra 8100 for cheap on eBay.

  The screen sometimes goes black its still on I need to press the shaft close to the screen and it beeps sound sounds and back on.

  I removed the frame of the screen and it made the difference for a about a week but just happen again:(mais je croise les doigts pas très souvent.)

  I read on google etc. it can be sumtin with led, etc. I just want to know how to replace the part?
  What part I need to replace etc.?

  I disable all power management things, and sometimes even of it is would no doubt something with the screen.

  I need ideas how to resolve this because it's a good laptop for a student lol prity.
  Thanks for reading and any rear power

  Hello

  Sorry, but it's really not easy to say what needs to be replaced.
  But it s certainly a hardware problem I put t know what should I PIN you meant exactly, but maybe a loose connection is causing this problem I mean a FL-inverter connection

  Here's a useful page [how remove and replace card ups FL on Toshiba Tecra 8100 | http://www.irisvista.com/tech/laptops/Toshiba-Tecra-8100/remove-replace-fl-inverter-board.htm]

  Maybe it could be useful for you

  In any case, these hardware issues are always delicate, and in most cases, each unique piece, and the connection must be checked. It's not easy, and in most cases and the computer laptop technician should take a look on this laptop

• Satellite A210-19 screen goes black all of a sudden

  Hi all.

  I'm new to this forum.
  I bought my new Satellite A210-19 has a week ago and I have read many things on computers laptops tohiba and saw that there are models with this problem: the SCREEN SUDDENLY GOES BLACK and all you can do is push the button restart.

  This happened to me yesterday and I am worried about it.
  Maybe I just pushed something or done something wrong because I don't want to believe this new laptop could have a problem with the screen.
  Do you have experiences with this screen problem?

  Y at - it a update of the Bios or fix or something? I read that I should put up a processor at 100% and power to TOP LEVEL management, but that may not be a fix!

  Hi Tomas

  I ve read in some computer magazines on the bugs in Vista and this problem could be linked to the question of Vista
  I recommend the Vista update to the last State. All fixes and patches must be installed on your laptop.

  In addition, you should check if you can update the graphics driver and BIOS.
  Everything you will find on the page of the Toshiba driver.

  Good luck

• Screen goes black randomly

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. Help, please!

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. In addition, move the screen does nothing.

  Help, please!

• HP HDX 16 t Premium - screen goes black after a few seconds

  Just today my screen started going black out of no where (when I played StarCraft 2, a high-performance PC game.) Now, he's doing regularly (after a few seconds to about one minute.) It's almost as if my computer goes into mode 'sleep' but I can't wake up. This happens less often when I put the brightness of my screen on a lower setting, and tends to fade before going to black instead of going just instantly black. I also have an external monitor attached, and when my laptop monitor goes black the external display remains lit and fully operational.

  Some things to note:

  -The power cord is attached and plugged in, and turned on my computer.

  -J' have a cooling block and my computer is not overheating.

  -The battery has full juice.

  -J' tried to restart my computer several times and still have the same problem.

  -C' is the case even when I'm not running high performance games or programs.

  -My settings to be able to tell my computer never sleep, decrease intensity after 10 minutes (5 minutes for the battery) and the screen turns off after 20 minutes (15 minutes on the battery.)

  -When the laptop screen is on the brightest display settings, it seems to be flickering.

  I did some research and it seems to be a problem with the LCD capacitors going bad. If anyone can check this? If this is the case, is there a way I can replace and where would I do my shopping?

  Thanks in advance

  These are as common as dirt

  http://shop.eBay.com/i.html?_FROM=R40&_trksid=p5197.M570.L1313&_nkw=HP+HDX+16+inverter&_sacat=see-all-categories

  Services of HP Media Library allows you to get it out, let me know if you need more instructions on how to navigate the library.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  http://h10032.www1.HP.com/CTG/manual/c01612461.PDF

  Look at page 3-9 for the part number of the inverter.

  Lamp of Duel 496467-001

  Unique lamp 488317-001

  If it's a double lamp, there will be four wires coming out of the bottom of the screen and a unique lamp will count two. You won't suddenly sure until you take it apart.

  You can also Google the correct reference to find a third party retailer and there's the HP parts store, but they are usually expensive.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=B31FE8D2C778483EA12849EFCC8F293E

• Satellite 1800-814: screen sometimes become black (recovered by pressing the cover)

  Hello
  In recent months, my Satellite 1800-814 screen suddenly goes black. Works with Windows XP SP2.
  Screen can be reactivated by pressing the cover (just above the power of the button on / off) a few times (not too long otherwise it will sleep of course).
  However, it makes me nervous about the quality of the portable computer, everyone has experienced this before, know how to solve this problem permanently?
  Rgds, Olivier.

  Hello

  Try it please check all settings (disable monitor) power management.