My premium Z5 hang and become inadmissible

Similar Questions

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• HP Compaq Touch Screen L2105 becomes inadmissible

  Have had 4 HP Compaq Touch Screen (TS) L2105tm 21.5 "monitors (Rev). ATT112 July 2010) running

  on Win 7 Home Premium 32 - bit OS on HP Probook 4525 s business and 4530 s, with

  all the updated drivers for monitors and the display drivers for laptops.

  All 4 units returned; 3 shipped as identical L2105tm, but with Rev ATT113 September 2011 models

  but all the 3 Touch Screen (TS) became unresponsive and the only removal/insertion of USB

  Plug the problem temporarily relieved, but re - occur, unacceptable in our

  the store environment.

  4th TS was shipped as a 'HP Compaq L2206"which has worked flawlessly, the attempts BU

  For more L2206s delivered without success, as Supporf of HP (magnitude within two supervisors,

  in China and India), said that "the reason why you have a L2206 L2105 wasn't".

  available at that time for replacement.

  Spent 2 hours on the phone with same scenerio "we cannot ship an another Touch Screen L2206"

  even if all the TS under warranty until 2014/2015.

  This is getting extremely frustrating; any advice how it escalate higher?

  Thank you

  Is that what you found solutions to all, re: touchscreen L2105 becomes inadmissible?

  We were all finally back to our L2105s and after a year and a half, and many calls to

  HP support (estimated 7 Tech), we have finally the newest L2206 touch screens, with

  virtually no problems. It seems that there is a flaw in the L2105 gel, which (typical)

  HP does not wan to admit?

• Satellite L670-12J - becomes inadmissible constantly

  Hello

  My Satellite L670-12J new running Windows 7 64 bit freezes constantly, usually a few minutes after the start of almost every time I turn it on. It becomes inadmissible: I can't change the application, view the Task Manager or activate the start menu. The mouse cursor moves, but displays the wait icon and I can't click anywhere. The hard drive light flashes on a regular basis, a quick flash once a second about.

  It does not appear to be linked to a specific program that I am running. I can get when the computer is idle or when I run a random application.

  The only way to recover from it turn the computer off (press and hold power for a few seconds). Once it restarts, it works without problem until the next time I turn it on.

  As I bought this week yet, should I go back to the dealer and ask for another or is there something I can do to fix this?

  Thank you
  Luis

  Hello

  Usually, these gels can be related to a hardware or software problem. You have installed all drivers for software once you've got the laptop?

  In General, before returning the laptop, you must reinstall Windows using Toshiba recovery disc. The disc can restore factory settings and if it s just a software problem, it will be fixed after reinstalling Windows.

  Otherwise you need the service help :(

• Vista Home Premium Screensaver Aurora and the energy of Windows

  Since 3 weeks I have had really bad luck with 2 of your screensavers and my 4 graphics cards. I'm not sure what kind of screensavers guys do but 2 named Aurora and Windows energy should never have been released to the public without testing, including the impact on your GPU and overheating.

  In the last 3 weeks I was troubleshooting problem vista Home Premium 32 - bit Windows and freezing issues. Card provided with the computer was GeForce 6150 TO work for about 2 months and then computer began to do bad things, freeze, stop, don't work sometimes and some other questions. I thought it was bad GPU so I replaced it with my HIS ATI Radeon X 1950 Pro, this card gave me warnings 12 hours after it has been installed that card is running a little hot and the ATI software will lower FREQ map. This card lasted about 2 days and he died too, but this time model would be just weird points and not whole screen is unreadable. I installed the program called the fan speed to monitor and record what is happening with this card. Computer has been used for business only IE and a few other small programs where ran, no games or anything. Since my last card was fried I replaced it with my GeForce 7900 GT OC, this card gave me the nice amount of needed data, but at the same time, this card lasted only 3 days.

  I thought as the fans run at full speed and becomes pleasant cooling perhaps is the PCI-E slot which is a short or something, wrong.
  Today I went to the store to buy PCI card, got nice $65 GeForce 6200 and plugged in, the fan speed is ready to record everything, Idle temperatures where 41 C for 47 of the CPU and GPU. I was doing some defragment and antivirus, trying to run the CPU at 100% and record what is happening that I was also running Media player and other programs with Visual effects to see if I can push this cards Temp. above its limits, after 2 hours of messing around with this, I gave up and is gone to smoke a cigarette, returned screensaver has been running (Aurora btw) off and checked the temp. Newspaper.

  Fan speed showed warning and GPU temp to 85 C. Then I then and tried the same thing on the screen saver Windows energy and got the same results, just go inside the screensaver and clicking on Aurora screensaver will bring your cards temp at least 5 c in a second.

  Since I do not use Vista (and will never) on my home computer, I was wondering if someone with the GTX 200 series can try and test this point and see how many temp. changes on his rig during this operation. I my rig with windows XP pro and don't know if I can get Aurora or energy of Windows XP to test it on my GTX 260 sli.

  Thank you

  I would check the power supply. A screen saver will NOT cause to burn three cards. MCDST
  A founding member MCITP - technician Support Enterprise-
  MCTS - Configuration Vista - Charter Member
  MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
  MCITP - Consumer Support Technician
  MCTS - Windows Server 2008, Active Directory Configuration
  MCTS: Windows Server 2008 Network Infrastructure configuration

• Safari hangs and lags while watching the video on youtube

  While watching therapy Unbox videos, the video hangs and lags. What's weird, is that only Unbox GAL of video therapy and I have not had this problem with any other channel. Confused! Help!?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Firefox hangs and then greys out

  After a short period of normal use, Firefox hangs and when I try to click on a new page of image greys out partially. On the top of my screen it says that Firefox is not responding. My only course of action is close the program down. When I do a small window opens saying Firefox is not responding and gives the possibility of closing the program or waiting so that he could respond.
  I tried to remove Flash 11.3 and 10.3 installation - no change.
  Tried to delete and reinstall Firefox - no change.
  Don't disable all plugins - no change.
  Tried to restore the PC to a previous point - no change

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Qosmio G30 - 175 display starts to blink and walk and becomes unusable

  After a while my Qosmio display starts to Flash and works and becomes unusable.

  A friend suggested that it was overheating.

  So I've equipped with feet to the rear to raise him up to an inch.

  It seemed to work for a while, but now it is restarted.

  Has anyone encountered this problem?

  I wonder if I can increase the speed of the fan in some way...

  David H

  The idea with the breeding of the portable back was pretty good, but have you checked vents for eventual dust? If you find that some of them, use the jet of compressed air to clean.

  Also, I recommend a reinstall of your chipset and display drivers.
  I think there are tools around the internet to control the fan speed, NHC is one of them, but they are only 3 third party programs, you can use them at your own risk.

• If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  Windows Server 2003 SBS is our 'old Machine '.
  Windows Server 2003 R2 Standard will be our "new extra Machine.
  = 2 different machines

  1. can I install additional Windows Server 2003 R2 Standard to an existing Windows Server 2003 SBS as backup domain?

  2. given my Windows Server 2003 SBS is an old machine, keep crash or auto restart or if existing Windows Server 2003 SBS unable to start, spoil, a new Server Windows 2003 Standard R2 can take on the domain controller, and becomes the principal server?

  3. after my old fixed my Windows Server 2003 SBS, can join Windows Server 2003 Standard R2 domain?

  4. you have any side effect or the limitation of SBS and Server Standard on working together in 1 area?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server general forum:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Concerning

• When you've been a long game my system hang and see a blue screen?

  When you've been a long game my system hang and see a blue screen?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Hope this helps, Gerry Cornell

• Vista Premium home help and support missing by mistake reviews. How can I get that back

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Download the file here:

  Windows Help program (WinHlp32.exe) for Windows Vista

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5143

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Whole computer freezes randomly. Browser hangs and then all websites load - Ctrl + Alt + Del then freezes

  This started happening yesterday for no reason. I start my PC, and everything loads very well. I then start my browser and after a few minutes of random browsing, the browser hangs and then it grey out and I get the thing "program not responding", but then I try ctrl alt delete to start the Task Manager to end, but it is not pop up. It takes literally like 10 minutes until that browser reactivates and then I can use ctrl alt del and terminate. Then I'm going to restart the browser and does not pop up. I constantly double click on it and he then decided to work a few minutes later, resulting in many browsers to launch at the same time.

  Sometimes when I'm not so lucky, the browser hangs and after awhile THE ENTIRE COMPUTER crashes and I have no choice but to hold the button to restart.
  I restarted in safe mode and it works quite well after that.
  I ran Malware Bytes and Norton and found nothing harmful to the computer. I also ran another virus scanner, I found on another forum (that they recommended) do not remember the name because I uninstalled it (don't like many antivirus installed at the same time), but it came back with nothing either. I have scanned even in safe mode - nothing.
  He has recently started to happen and I have nothing for this. The only thing abnormal I remember to do is to have to restart the computer by holding down the button when a game has crashed, and then when he asked me if I wanted to run windowed Windows or not, I assumed that the background choice was to function normally because that's what he's always been, but I chose something else and did not notice. It's a blank screen for a few minutes then loading started wondering if it was the start for the first time. I don't know what was going on so I held the button again and run Windows normally and he began to do this, but I really didn't know anything about him.
  Also want to add that the internet does not work until it thaws

  Hello

  I suggest that you put the computer to boot and check if it solves the problem:

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, place the computer to a normal startup by following step 7 from the link above.

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!