My san disk will not work I have to do

Similar Questions

• Windows 7 recovery disk will not work!

  OK, so I have a laptop Compaq Presario CQ61 with windows 7 64-bit, and it crashed a few weeks ago. I was told to fix it I would need to order the recovery of best2serve discs so I did and they arrived yesterday. Although earlier, I tried to grab the laptop and disks do not work, I set the BIOS to make the player load first, and everything that happens is a small comand window flashes up a gray screen is displayed with a chart of tape on it without any option for me too choose, and he stays on this screen forever.

  Can someone help me?

  Thank you, Kris

  Hello

  The reader at the link below must be compatible with your laptop and will offer a little more storage.  You might well be able to install a hard drive with a larger capacity, but this should be a choice course.

  http://www.Amazon.com/Western-Digital-2-5-inch-notebook-WD2500BEVT/DP/B001IKRKO0/ref=sr_1_1?ie=UTF8&QID=1297374178&SR=8-1

  I hope this helps.

  Best wishes

  DP - K

• Restore disk will not work need a windows copy XP where can I find one?

  My hardrive broken so I am new and my restore disk does not work where can I get a version of windows to put it on a floppy disk and use it on my computer OSless.

  XP has disappeared.

  your best bet is to work with the manufacturer of your laptop, maybe they xp on their shelves.

  also, the restore disks may require specialty measures to run for them to be activated.

  so for the two cases above, visit your computers home site and look for the model number of your laptop for the faq on the help of restore disks / recovery discs / factory restore.

  by the way, how broken is the old hard drive?

  He must have a hidden section on it with all the preserved original software which can be used to restore the hard disk.

  but this section could also be copied into the new HDD as well, according to which 'broke' implies.

  by the way, is that the technician who replaced your hard drive take a look at the restore disks too?

• My imac (El Capitan 10.11.6 - 2 Terabyts) complete and FCPX disk will not work. I moved a few fcpxbundles library to an external hard drive (seagate 2 trabyte) and erased from the iMac. NowFCPX said that missing data as effects therefore can not shar

  Help!  My FCPX (v - 10.2.3) does not work because my iMac drive is full (iMac 21.5 inch has 2 terabyte w / v OS El Capitan 10.11.6) I had tried to free up space by moving tons of files on a usb disk Seagate (2 terabyte) speedboat that barely made a dent. then on the advice of a friend I found (in movies) a file called Final Cut backups. There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21 that I thought should be enough and them removed from my iMac drive - bad! It says I have only 13.46 GB free on my 2 terabyte iMac total!

  The fourth fcpbundle it's TB 1.72! But before leaving that I returned and opened FCPX and found the warning triangle around my library... While my last project looked OK I couldn't / the share of exports because the pop-up says FCPX has no data for efx etc (the media looked at and display fine) and cannot be taken out.

  FCPX can work with the "beams" moved to another drive? How the detectable in a new place? Or how to put them back?
  How can I make sure that future packages clutter my iMac again?

  Do I need a RAID disks? If yes which?

  I found other folders in folders 'Make files' and records backup for projects with the .fcpbundle inside files

  How can I get this sucker working again?... and what should I do to keep him from doing the same thing in the future?

  Thank you

  John

  :.. then on the advice of a friend I found a file called Final Cut backups (in movies). There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21:

  The backup files are only the database files (no media) and must be low, not gigabytes, do not know what is happening there.

  Media libraries stored in the bundle of FCP X library or stored outside?

  If stored at the breast, called managed media, simply copy and paste the library to a different location.

  Make sure that library books newly located correctly before you remove what either.

  Perhaps check your settings of the library.

  Click the library icon in the browser and it appears in the Inspector:

  

  By clicking on change settings shows this:

  

  Move the mouse over the media and it will reveal the path where things are sent.

  Then you might be able to track down what goes where.

  From you description, it seems that most of the media files and rendered is not be moved successfully.

  Some screenshots would be useful if you can't find where stuff is.

  Al

• Satellite P200D Vista recovery disk will not work

  The OS is screwed on this laptop and when I try to boot normally a blue screen flashes so fast that you can't read and it stops. I try boot in hosted HDD repair he said: "the installed program cannot start. Click OK to turn off the computer. The CD drive is broken so I source and cd-rom external and started up the Toshiba restore disk. Who gets however that

  Waiting for ODD vacancies
  E ODD drive ready
  Check for support in the E: drive...
  /

  Then it basically crashes for this. Any ideas? Thank you

  > Any ideas?
  Swap the optical disk drive and you will be able to use the recovery disc. You can get it on eBay and it is not so expensive.
  I fear that external device is not correctly recognized and there is no access to recovery media.

• Can Hi anyone tell me why my music downloaded from disks will not work on moviemaker

  Hi all, when I did a movie in movie maker it worked fine, but now it does not accept all my music I have on my computer someone out there who can tell me why?

  Hi timdurrant,

  Check the link for the version of the windows operating system that is installed on the computer.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  If you are using windows live movie maker, and then post your question in the Windows Live forum. Please see the link for assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Has taken pc in for Reg. gliches & fix, now the speakers will not work! Have chked everything I know, still sound like dubbing, or two channels at the same time?

  I run a custom built Tower pc, with windows xp svc pk 3 on this subject. ASUS MB brd. have a large woofer and two small tweets, it looks like that I play the song even in two places at the same time, only not synchronized.  All confused, lived all the diagnostic test can think and all say it works fine of course.  As a result, been combing of this Council, but can't really find something sufficiently specific for this problem.  Or if it's here, Miss me him!  For any help would be appreciated, I wish you my songs back!  I tried to play off of windows media and hard drive also.

  BTW, I'm the old lady of 58, so, could you young computer scientists Genesis keep it as simple as possible!  Please, I beg you! Thank you very much!!

  Hello

  1. what Media Player do you use?

  Try and proceed as described in the link.

  How to fix sound problems in Windows XP:

  http://support.Microsoft.com/kb/307918/en-GB

• Vista recovery disk does not work

  my recovery for a6057c disk will not work after that I used the NeoSmart
  recovery disk.

  After logon to Vista I see that empty office, I can access the task
  Manager by CTRL - ALT_DEL.manager.

  Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
  I just want to make a disaster Recovery and
  all over again with new factory. Does anyone have any ideas?

  I now remove the prtition C on my drive.

  Vista still labels the d drive, I have no C?

  I found the answer on the Microsoft Knowledge Base.

  Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

  The article is also for Vista.

  Article ID: 223188 How to restore the drive letter of the system / boot in Windows

  Would do the same thing.

  I took the article to use regedit to swap my C & D return records.

  Now windows Vista starts OK. (All I had before was just an empty office).

  I also received my HP Factory disaster recovery disks it looks they will work if I need.

• I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  Hello

  Check this location of registry for Upper and Lower filters...

  They will appear on the right after clicking on the location of Reg...

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}

  Remove all entries found perhaps restore your disk, but can also cause something to stop working...

  Maybe you can identify the program causing the problem with the name of the filter and update...

  An example of this is iTunes... It uses a "GEAR" driver that can cause problems...

  Install the most recent usually solves the problem...

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  Hi Kareyfabela,

  For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/

  I hope this helps!

  Jonty

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  Hi John4452,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  Troubleshoot failures to find the new LifeCam hardware

  I hope this helps.