My Satellite 1800-911 will not restart

Similar Questions

• Satellite P850 - Windows 8 will not restart properly

  Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

  It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

  I would be very grateful for any help that anyone can give me please.

  I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Please post comments if this helped and how you can solve this problem!

• Satellite 1800-911: standby mode does not work properly

  Hello.
  I had use the model of my laptop Toshiba Satellite 1800-911 for 3 years and it's great and I had a few problems. But now, after the installation of Windows XP Professional SP2, I have a big problem. When I put in stand by mode cell phone it's going to sleep and it's great. But the problem is when I would go my work since the mode ensures that is on the HARD drive on the laptop, but the screen is always black and I have to reboot the system. I can't use my PC and my work came out... Help, please

  Best regards
  Nikola comedy
  [email protected]

  Hello Nikola

  I guess that the Windows XP SP2 update is responsible for this problem.
  Well, in this case you must update the Power Saver utility.
  What you can try on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Perhaps it is also important to update the BIOS.
  Please check if your device has the latest BIOS version.
  Here you can find the BIOS.
  http://www.toshiba-tro.de/subpage/BIOS.html
  If you decide to update BIOS please check the update on this device procedure.

  Good luck

  Good bye

• Satellite 1800-911: error #1 - C2502 CD/DVD drive IDE

  PC: satellite 1800-911 BIOS V.2.1.

  I try to fix the problem with my DVD/CD COMBO drive (all of a sudden do not read any kind of CD).
  I tried to update the firmware from 1313 to... I don't remember. I get now, before XP pro SP2 start, the "IDE #1 ERROR" message and the operating system do not recognize any DVD/CD.

  BIOS recognize, ligth blinks and you can use the eject button. When XP is from that of the ligth is disabled and the eject button do not work.

  Now, if I try to go back to firmware 1313 (from boot floppy BACK) I get an error TYPE ROM INCORRECT.
  Can I fix this?

  > BIOS recognizes, the light will blink and you can use the eject button
  That means nothing!

  If the IDE 1 error message # appears it means that the BIOS does not recognize the device (CD/DVD drive) that is connected to the IDE 1 controller.

  I think that you used just a bad firmware and flashed settings preinstalled with the wrong firmware!
  Now the master\slave\c-salt settings have been changed and the BIOS cannot access to ODD.

  I don t know where did you get the firmware, but in my opinion this firmware is certainly false and not supported!

  I found this drive here on the Toshiba page but the firmware is missing
  http://www.storage.Toshiba.EU/index.php?id=8&PID=99&SID=3

• Satellite 1800-911 too dark screen brightness

  I have a Satellite 1800-911 that works correctly, except that the screen is too dark, you can barely see.
  I tried 3 screens and 3 inverters that work correctly in a 1800-354, without result. I also changed the cable from the motherboard to the screen without success.

  There seems to be no control that affect brightness: I tried the power saver routines: no difference.

  When I connect to an external monitor, the image is perfect.
  The laptop is a new installation of Windows ME linking the restore CD.

  Hello

  make combinations of already tried the "FN" keys on your keyboard to make you brighter screen? If not already so I suggest you perhaps it helps.
  If not, I guess you have a problem on the motherboard.

  Welcome them

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• My IPad sudenly turned off and will not restart. It is fully charged.

  My IPad sudenly turned off and will not restart. It is fully charged.

  What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• My 6 month Apple Watch stopped charging and will not restart.

  My 6 month Apple Watch stopped charging and will not restart.

  Hello

  Try the following steps:

  Charge your watch about 2.5 hours, making sure you follow the instructions in charge here:

  Check your battery and load your Apple Watch - Apple Support

  After charging, if your watch has not already restarted automatically:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If it still does not start, then try force it restarts again: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite A 200 will not be stopped correctly

  My Satellite A 200 will not be closed down whemn I close the system. Only solution I can use is now 'hard' shut down, using power button, but this isn't the right way.

  Is this a known poblem? Can you give us some solution?
  Jeroen pool

  Maybe a process that runs in the context of the operating system can't shut down properly and therefore the Windows operating system cannot stop.
  I've seen questions on different computers.

  I think you should try to clean the registry with the 3rd tools i.e. CCLeaner. It s for free and can be downloaded from various sites.

  If it does not help check if the new OS install helps solve this problem.

• Windows 7 will not restart after an installed cleaning

  After a clean install of windows 7, it will not restart when you click on restart. It just goes to the screen to the motherboard. If you go into the bios, windows will restart by clicking on the disk that contains windows 7. How to make computer restarts correctly?

  It is probably an incorrect configuration in the BIOS boot priority setting.

  When you install the operating system, you usually change the priority settings of your device to start to get my media you use (USB or optical drive). Therefore, it is possible that it was for the setting even after installation, so he's trying to boot from the recovery media instead of the operating system on the hard drive.

  The BIOS boot priority settings vary depending on the manufacturer of the computer. Therefore, for the change in the value of such assistance, we suggest that you contact the manufacturer of your computer.

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out