My usb device is not recogonized
I even bought a new mouse that because earlier I had wireless now I wired... still problem not is not solved... I even restored it all my computer again.
Hello
1. do you get an error message?
2. were there any changes (hardware or software) to the computer before the show?
Method 1: remove and reinstall all the Controllers of USB(Universal Serial Bus)and see if the problem persists.
a: clickStart, type devmgmt.msc in the start search box and press ENTER.
b: expandBus USB controllers.
c: Right-click every device under theBus USB controllers node and then clickUninstall to remove them one at a time.
d: restart the computer and windows will install the rear USB drivers.
Method 2: Proceed as from the link below and see if the problem persists.
Tips for solving problems of USB devices
Hope this information helps.
Tags: Windows
Similar Questions
-
I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
HELP - All the USB device does not not - Vista Ultimate
I have a desktop P4 computer and ran on Vista Ultimate for more than 1 year (window updated constantly). Everything worked smoothly until one night, all my USB devices don't work anymore. Based on the Device Manager, the USB are ok, check my BIOS, everything remains unchanged.
now, I got tired of reinstalling the same operating system and at the end of the installation, all USB devices do not work.
Please can someone advise what should I do to recover my devices USB working again.
It is the motherboard or the operating system has problems?
Hi Dragon,.
Follow the instructions below and check whether it is hardware or operating system issue.
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devicesCheck whether the problem is resolved.
If this does not work, you can try to update the chipset drivers and see if the problem is resolved.
Looking for drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-VistaIf the problem persists, contact the manufacturer of your computer to update BIOS that may help you resolve the issue.
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
You can also check out the link below.
Rollup cumulative update for USB in Windows Vista Basic components
http://support.Microsoft.com/kb/941600Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Original title: I can not use my USB, this legend is displayed: "Please insert a device", what can I do?
It is installed as always, but when I want to use it or open it, it says "screwed a disco en Unidad extractable: (G)" Please help!
Hello
1 have you ever done any recent hardware or exchange of software on your computer before the show?
2. What is the brand and model of the USB device?
3 is the issue limited to any particular device?
Please follow the methods and mark the question below:
Method 1:
Tips for solving problems of USB devices:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Note: This also applies to the Windows 7 operating system.
Method 2:
Open the hardware and devices Troubleshooter:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
Uninstall and reinstall all USB controllers and check.
a. press the Windows key + R simultaneously to open run, type devmgmt.msc and click OK.
b. in the Device Manager, double-click Universal Serial Bus controllers to expand and right-click on each of the controllers and click Uninstall.
c. restart the computer and install USB controllers in Device Manager right click on Universal Serial Bus controllers and click on Search the hardware changes.
I hope this helps.
-
My USB devices are not recognized, but they have a power
My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.
I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.
My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.
It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.
I would really appreciate help with this
Hello
Please follow the methods.
Method 1:
Run the troubleshooter from the link.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Try to uninstall and reinstall the USB controllers
a. click the Start button.
b in the start search box, type devmgmt.msc and press enter
c. expand Bus USB controllers
d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.
e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
I would also ask you to contact the manufacturer of the computer to help.
-
Satellite M60: USB devices do not work
Hello...
I have a Satellite M60 and all USB devices with microphone (webcam, VoIP phone) do not work.If someone could help with some suggestions, I would be grateful.
Hello
What do you mean by "not working"? The operating system recognizes external USB devices?
Have you installed the drivers of these external USB devices?
I also have a webcam and I had to install the drivers provided to use the device. -
USB devices drivers not installed
Hello
I NI USB-6212 device, LabVIEW 2010 and DAQmx 9.1.5 on Windows 7 (x 64) device drivers. Device is normally recognized on another computer, but not on my computer. When I plugin device, searching for drivers to boot Windows, but they are not. The Windows Device Manager sees the device as unknown device, and MAX sees him not at all. Monitor devices OR runs and NO charger.
Any help would be appreciated.
Thank you
Andrej
I don't think that it is the cause of your problem (since you mentioned that the Windows Device Manager does not see the device), but you should also note that there is a problem in 9.1.5 where devices are not necessarily recognized by MAX; patches are available for 9.1.5 or you can go to DAQmx 9.1.7 or 9.2.2.
-
removable usb device is not recognized by windows
my camera and GE multi card reader no longer recognized by windows. in the Device Manager is no longer visible. I plug it into the computer and nothing, no sound connection and no autoplay more. This is due to an update. also install adobe air appears as damaged when starting computer installation. all I want to do is load the holiday pictures to my laptop as I have always. but now nothing. all ideas
Hello
1. What is the brand and model of your computer?
2. What is the version of Windows installed on your computer? For example, Windows 7, Windows Vista.
3. this happens with all USB devices?4. have you done any software or hardware changes on your computer before this problem?
You can run the fixit mentioned in the following link.
Method 1:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2:
I suggest you to update the chipset drivers and other drivers on the manufacturer's Web site.
In addition, you can search the hardware changes in Device Manager and check if it helps.
In addition, I would ask you to answer these questions and add additional information so that we can guide you in the right direction.
-
But powered USB devices are not recognized
Randomly on my personal self built computer, readers usb ceased to recognize anything I put in them. The strangest thing is that the devices kept under tension. The mouse led would light up and charge the ipod. I had to plug into an old school mouse and keyboard that do not use usb to use the machine.
I tried:
Unistalling/reinstalling usb drivers
Update BIOS
Uninstalling drivers for devices (ipod, keyboard, mouse, external hard drive)
Updated motherboard drivers
Compensation to reinstall VistaI'm really confused on what else to try.
Data sheet:
Q6600 2.4
750FTW
500 GB WD 7200 RPM hard drive
2x2gb gskill
EVGA 9800Any ideas would be useful. Right now, the only thing I can think is to replace the motherboard, but I feel that I would not. Thank you.
Hello
If you can not embedded USB to work then you can disable it in the BIOS and the device
Manager and use a USB expansion card that is not expensive.Check the BIOS settings.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for your player (maybe
zero or more than one) and top - right click UNINSTALL.Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
Is there.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
-
External USB devices are not recognized
* Original title: Ext usb devices appearing is not in my computer
ACer laptop WIn 7 amd a8 quadruple-heart: when I log about 1 T external usb 2.0 or 3.0 hardrives or key USB 64 G,.
Device Manager displays the devices, but they do not appear in the list of computers. I have other ext hardrives and the keys that operate without problem.
I have to go to disk management and see that they appear but they do not have a drive label assigned.
Then I have to give it a label letter manually it will appear under my computer.I tried the same features on a laptop HP with Windows 7 without all these questions.
Thanks RTierra
I have found a more permanent solution. At the command prompt, type Diskpart
type
automount
If the answer says disabled, type
automount enable
Once I did, my USB keys have been recognized automatically when it is plugged.
Why the setting has been disabled? who knows.
I hope this helps others.
-
MTB usb device drive not installed correctly
Original title: mtb device usb driver does not not propely? What id o to fix?
I have iphone 4S... when I connect my Iphone with my pc, iTunes connect with my iphone but pc do not connect with my phone and shows mtb reader usb device not installed correctly. How I solve this problem?
Hi Isabelle,.
I suggest you try the steps from the following link:
iTunes: iTunes Store advanced troubleshooting
http://support.Apple.com/kb/ts3297Hope this helps! Let us know if you have problems with Windows in the future.
-
Hello! I'm here in the dell community because I'm having an error with a PowerEdge 2850 server. When I boot it all seems to work, but inspection closer both blue and yellow led on the front is off. All devices (such as a keyboard) will not turn on. Supplies seems to work perfectly well with the error led out of power and both of the Green led on the power supply on. The drives at the front lights up but then after 2 seconds the led for every hard drive goes off and then when you reconnect the drives it will be on for 2 seconds then turns off.
I tried:
Reset all RAM chips and CPU in the case
Replugin all hard drives from the server
I tried multiple monitors
has tried just using the power supply instead of the power brick or a surge protector
and tried to run it only out of a raid, everything ends up in the same result
I have no idea what to do so im just going to ask the community of dell. Thank you!
Hello.
What is the error specific are you? Try the system at least to the POST with the following components:
- System Board
- Processor
- A bar of memory in DIMM1-A or B-DIMM1
- Power supply
- Riser
- Control Panel and bottom of basket (necessary only when the last power state was off. Ensure that all USB devices, including the keyboard are disconnected.
-
My usb device is not recognized / malfunctions since flashing the bios.
I have a Canon EOS Digital Rebel Xt, and since I flashed the BIOS I get a message saying that the USB device has malfunctioned. I reinstalled all Canon software and drivers, disabled/uninstalled all... so frustrated USB hubs... anyone?
Hello
Thanks for asking!
You may not use the Canon and get message that peripheral USB has malfunctioned.
What is the brand and model of the computer?
As you have flashed the BIOS, I suggest you to contact the computer manufacturer for help with this issue.
If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
the USB device is not recognized
Hello
I have a problem with one of the USB device and I don't know what to do!I use Sony laptop, Windows 7!I was using the front USB and it worked!Help!This mystery USB device works when plugged into another computer? Then the camera seems not to have or may be damaged.
-
Connect menu USB devices does not appear in the view Client 4.0
Hello world
I am facing a problem with the display Client 4.0, in some facilities does not display the menu to connect USB devices on the top of the Menu bar.
This situation occurs in some computers that are running Windows Vista or Windows 7.
Is that what someone has experienced this problem?
I think it's a problem of display compatibility customer with some component installed on the operating system, but I have not identified which we.
Any help, pls.
Kind regards
Carlos Luna
You are right, that the view Client 4.0 does not install USB drivers on 64-bit computers. 64-bit is coming.
Maybe you are looking for
-
Small the last month or two, I can't reboot my Mac mini or disconnect. The drop-top goes away. But the dock remains active. I have executed the first aid utility, but can find nothing wrong. Any suggestions?
-
I am a user of seven years of Thunderbird. Three months after downloading successfully messages from my e-mail address, [email protected], I started having bad to select messages to read the content. Whenever I chose a message, the software ente
-
OneLink + don't Dock no network in Windows PE
Hey all, I'm trying to push an image using SCCM for a X 1 Yoga that we ordered. As it doesn't have an ethernet port, we want the image using the OneLink + Dock. We can start Windows PE, but he does not see the network from the dock. After a few hours
-
Problems saving a DAQ task, in Labview and besides running
I'm trying to use DAQmx Save Task.vi in LabView to save a generation of simple signal task, so I can open it later / elsewhere. However, the problem I have is when I try to open the task in MAX. The task is presented in MAX, but when I try to run the
-
Error, you must be an administrator to run a console session using SFC
Original title: vista administor have windows vista Home premium and it may seem silly, but how to administer privileges. Am the only one on the laptop so I thought I got them somehow, but not so much that when I tried to invite her command of my I g