My HP OJ pro 8500 AIO 909 g wireless!

Similar Questions

• HP officejet Pro 8500: cannot get a wireless player to work

  my HP Officejet Pro 8500 wireless printing works fine, but I can't get the scanner to work - it does not able to communicate with the HP device. My operating system is Windows Vista. The error message I get when trying to use the scanner by clicking on the icon "HP Officejet Pro 8500 A910 Scan" is "scanner communication cannot be established."

  Thank you for your help

  Hi @utopian,

  Welcome to the HP Forums!

  I understand that you can not scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I'm happy to discuss this issue for you!

  Please have a look through this guide to scanning, a 'connection error' or "Computer no. detected" Error Message is displayed when scanning for HP Officejet Pro 8500 has e-All-in-One printers (A910).

  Hope this guide helps!

• OfficeJet Pro 8500 909 a will not be re - install Mac 10.7.5

  I am very frustrated with this issue, I'll have. Here are the bullets:

  • Running Mac 10.7.5 (Lion).  Printer is connected to this computer through the USB port.
  • Has started to receive messages on my all-in-one HP OfficeJet Pro 8500 909 a scanning would work not and check the documentation for the aid.
  • While looking online and through some troubleshooting, I deleted my print printer to attempt to reinstall fees.

  The main problem I encounter is that I can't seem to re - install this printer no matter what I try.  Here's what I tried...

  • Tried to launch the HP (ver 2.3.15) CONFIGURATION UTILITY and DEVICE MANAGER HP (1.5.8) that was installed on this machine for the printer.  When going through the Setup utility, my device is not seen, so it is considered for a screen and then I invited me with a message that says that my device is not supported by the installer and I had to go to hp.com/support for more help.
  • When I go through SYS PREF > PRINT & FAX and try to click on the '+' to add a PRINTER, the printer never shows in the choice of 'default' as being same / connected.
  • When I go to find help on the support site, the indications only can I find tell me I should use for the Lion, update the Apple software to download the latest update (which I'm sure has already downloaded on this machine in the past).  Tried to restart my Mac, reboot and disconnect all the wires between the printer and Mac, to see if it would work the update of software this printer is connected.
  • I scoured the HP website to try to find the "utility installation hp for lion" install file, but it doesn't seem to be available as a manual download - each direction pointing right back on software updater.

  It is where I am at-I feel like I'm stuck in this small black hole where I can't use the HP Installer on this machine b/c it is too old and I can't download something 'new' of Apple Software Updater.  I did go to the Apple website and download the drivers for Mac OS x Mountain Lion & Lion. I have installed for this machine, restart and still nothing that shows this as a connected USB printer.

  Help, please.

  Chad

  Hi chadkafka,

  Follow the steps below

  1. check that your USB cable is good using a new

  2 open the system preferences and then right-click in the white area open. Select the Reset printing system

  Note: If you have installed other printers this will remove all printers in the print queue.

  3. open utility disk, then on your hard drive. Click on repair disk permissions

  4. connect the USB cable to a Mac and then select now, when it asks you to install the printer

  5. click on the apple icon Mac in the upper left corner and then run software update to reinstall the printer using the ASU.

  Let me know if you get the printer installed successfully?

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• HP OfficeJet Pro 8500 909 a - error B87126D0

  Receiving an error code of B87126D0 for HP 8500 wireless printer.  Printer will not turn off or restart properly.  Goes into a loop of full automatic test and finally clearly isn't the problem.  Conducted several hard resets, power disconnects and other troubleshooting steps, but they do not clearly the problem... The printer screen says "Turn off and then back on.  The following lights are flashing: phone (auto answer)! , blue wireless symbol and the power button.  Keyboard / function keys allow for the entrance - the only button that responds is the power button which translates the same loop long selftest.

  Hi @teebone22,.

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Officejet Pro 8500 A909a and get the error B87126D0.

  Plug the power supply directly to a wall outlet works. Do not plug it into a power strip, surge arrester, or secondary power source. Like that might be the cause of the error.

  Here is a link to the HP print and Scan doctor. HP print and Scan Doctor performs a check of your system and check the firmware of the printer.

  Here is a document on the error codes and their meanings. First Solution: reset the product

  I hope this helps.

  Thank you.

• OfficeJet Pro 8500 909 a-. do not reset ink level

  Hi, I have an officejet pro 8500 and I have a problem has a simple solution, I hope! I put it in a new black 940XL high capacity cartridge anhd the LCD screen on the printer and the solution center monitor always shows an explaination (!) mark. This indicates that the ink is close to finishing. In the HP Solution Center, it also shows that the ink level is very low. I can only assume that the printer still think it's the old cartridge. Is there a way that it can be reset, so the printer recognizes that it has a full cartridge?

  Any help would be appreciated.

  Thanks, Ian

  Ok! In desperation I put in another cartridge and everything works.

  Obviously some kind of flaw with the cartridge. I'll take it back to the store when I can

  Thanks anyway

• HP Officejet Pro 8500 A910g impression - but never does

  Printer model:
  HP Officejet Pro 8500 A910g

  Operating system:
  MS Windows XP Media Center Edition, V 2002, Service Pack 3

  Method of connection:
  Wireless residential gateway AT & T U-Verse

  Description of the problem:

  Network printer not printing after the first print job prints. Display printer panel says

  "print...". "and the laptop display for printer status says" error - printing "(HP Officejet

  Pro 8500 A910 (network) - required user Intervention).

  I ran the HP Print Diagnostic Utility 4.1 for this printer when this has

  has occurred. He meets problem with queue print - print jobs are stuck in the print queue

  (list of files waiting to print). Click on fix to remove and print again

  jobs. I click on Fix and basically it tells me that it is impossible to clear the queue, to transform

  the printer off and on again, restart your computer and re-run the diagnostic tests which

  not looking then no problem with printing.

  I'm only able to print after turning the printer and then turn it on again - and that a single document

  or file with success before coming back to the same behavior. This is not a solution because it

  a printer is used for small businesses.

  All functions worked very well after the initial installation. Not sure when stopped working as he

  is used mainly during the tax season. There has been no hardware to my configuration changes

  Since the initial installation.

  Fax: The printer receive fax but never prints (now printing... displayed on the screen of the printer up to)

  I'm going to printer and on again.)

  Please help solve the problem. What information do you need?

  I tried both solutions you provided.

  None worked.

  I had the problem with a HP Photosmart 2610 AIO printer that I have had for almost 10 years. Has been using remanufactured ink cartridges and they work perfectly until there are about 3 1/2 months. The printer works now than if I use HP ink cartridges. I'm guessing that some required HP update HP ink cartridge only!

  I have tried everything I know to try and even some suggestions for HP and nothing works. So, I thought to replace the remanufactured cartridges that were installed in my printer 8500 currenty (I had a mixture of HP and refurbished who had worked successfully for a while) with original HP cartridges.  This seems to have solved my problem with printing.

  Of course, there was a HP update that required the printer using HP ink cartridges to perform. Is there anyway that we can get this update? If so, I would like instructions to do it for my two printers.

  Thanking you in advance for a quick response.

  Kind regards!

• Use of printer OfficeJet Pro 8500 crashes with the message "printer busy."

  I have a HP OfficeJet Pro 8500 (909 a) that connects wireless as well to the Terminal Airport and the MacBook Pro, but when you try to print from the MacBook Pro (running OS X Tiger 10.4.11), MacBook Pro print job displays a message "printer is busy, try again in 30 seconds".  Network is configured with DHCP router 10.0.1.1 (gateway) with printer to 10.0.1.2 and MacBook Pro to 10.0.1.3.  MacBook Pro can traceroute and ping gateway and printer, the network printer in the test passes.  HP software is installed and running by USB cable between the printer and the laptop.  No idea why the print job hangs after running?  HP printer was installed from preferences Print & Fax as an IPP printer.

  Hello

  Try to add the printer to print & Fax HP Jetdirect-taking rather than PPI, then check all difference.

• Mini 110 and driver OfficeJet Pro 8500 wireless

  I have an OfficeJet Pro 8500 909 g installed a few months, and it works very well with three laptops from Dell and a Dell desktop computer using the wireless connection.  Then, I bought an HP Mini 110 and tried to install the drivers for the 8500 from the disk provided with the 8500.  During the system check that the installer has determined that the screen resolution of 1024 x 576 of the Mini 110 was insufficient and demanded a screen resolution pass at 800 x 600.  Tried installing online - same problem w / ground 1024 x 576.  Got in a chat online with an HP technician - it offered to download and install the HP DeskJet 990c driver and gave me clear instructions on how to do so, claiming that he was 'the solution '.  While I am has not opposed in principle to 'the solution', I asked too many questions and either it bailed out put or the session has expired.

  The questions are:

  (1) the 990 c driver is actually a viable solution?  Some other threads I've read indicate that "mixing and matching" printers and drivers can have unexpected and unwanted results.

  (2) I've read how to 'force' a change of screen resolution of 800 x 600, which probably (?) will I would install the 8500 drivers - but what happens if I change the sdcreen back to 1024 x 576 ground?  The ration of aspect printer or the print size or appearance get all messed up?

  (3) why does it matter even the resolution of the screen?  Is it a question of WYSIWYG?  If it does so then 1024 x 576 ground is going to be a problem w / almost any printer, is not?

  Thanks for any help you can give.

  Don

  The software requires a minimum of 800 x 600 resolution so that the HP software can be completely visible on the screen. If the vertical resolution is less than 600, then there is a chance of the window not being is not completely visible, and so you may have problems using the scanner software. Follow the document below to force the resolution to 800 x 600 temporarily to install the software. Once you change the resolution back to the native, the software will work, but the window CAN be cut and not be entirely visible.

  Click here

• Yosemite and hp pro 8500 910 and envy 4500

  I plan to update on the new Mac os 10.10 Yosemite.   Will be my Officejet pro 8500 910 a and printer Envy 4500 AIO units on this bone function?   Drivers and software for this operating system is not on pages with HP support.

  Everything works fine with Yosemiti on the 8500 officejet pro and the envy of 4500.  I had no problem without either wireless or wired in either print or digital projects.

• HP OfficeJet Pro 8500 is printing without my consent

  This morning I found that my OfficeJet Pro 8500 has something printed during the night without my consent.  All our computers had been arrested or locked, and my wife and I slept.  This is the document that he had printed:

  HP ePrint mobile printing

  Get it started...

  1. go to eprintcenter.com

  2 sign up and enter your code to printer:

  3 customize the email address of your printer, add applications and more

  It's something that HP is now pushing to printers, or is it something that the print driver on the system Windows 7 to my wife can have printed?  I looked online and I didn't know any information about it.

  Thank you!

  Hi Rich, page you describe in your post is the information page that is displayed when the Web Services are enabled on the printer. This is done from the panel display front end printers and is not something that HP can push to customers as the use of the service requires the acceptance of the terms & conditions by the user. I am at a loss to explain how this page could be printed unless someone Vienna activate Web Services to display on the front panel of the printer. The reason that he printed late may be due to a delay in communication between the printer and the ePrint service. To connect with HP ePrint service the printer must have been connected to the internet via a connection, either wired or wireless. If the printer is set up to your home network wireless PC installed on the printer shouldn't be turned on so that the printer to work.

  This is a link to a short video illustrating the ePrint on the AiO Pro Officejet 8500 installation.  This link contains information about the ePrint in general getting started with ePrint service

  To disable the Web services on the printer, press the icon on the display ePrint , and then select settings and delete Web Services. Run this command when your printer is connected to the Internet.

  I hope this information is useful for you.

• Utilities HP Pro 8500

  So I just bought this HP Officejet Pro 8500 Wireless.  I also just upgraded to Snow Leopard.  The Officejet works very well since the software preloaded in Snow Leopard, USB and wireless.  The only part I can't get are all the options that come with the HP.  With my HP Photosmart C7280 old all-in-One, it was a HP Device Manager.  I could choose to scan in PDF, which is no longer an option.  It seems like a possibility to add the 8500 to the Device Manager, but I don't want to try the drive, because it says expressly do not to run it with Snow Leopard.  Any ideas?  Enter "Print & Fax" in the preferences of each time is heavy and it does not give me the same options.

  Well, I guess I've found my own solution - it was very simple, to whom.

  After I couldn't do my HP Photosmart C7280 scan filled previously perfectly no matter what I tried (that's all since installing Snow Leopard), I went to the download section of software at HP.  Now I had summer warned not to install the HP under Snow Leopard software (by a record accompanying my HP 8500, as well as several forums on the 8500).  I was so afraid I might screw something up.  I couldn't find a download of the software AIO specifically for OS 10.6 (Snow Leopard) C7200 series, I gave it a shot.  After that I downloaded and installed the software for the C7280, the new HP utility allows me to access all my printers (I also have an old Officejet 6110xi), place an icon for HP Scan in my doc and generally to customize all my settings.

  It's perfect!

  While I no longer need this, I checked to see if an OS 10.6 download for the HP Officejet Pro 8500 A909g was also available, and it's.  For all those who work with this camera, I recommend that you get the download.  I am convinced of the usefulness and other functions are the same and will seek to properly manage all functions of the device.

  OS 10.6 Snow Leopard includes drivers for my HP 8500, but the feature is not the same as with the HP utility.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• Officejet Pro 8500 printhead don't align

  Recently bought an Officejet Pro 8500.  But followed installation instructions the printer can't align the print heads.  Have reinstalled the print heads, heads cleaned, etc.  but in vain.  Auto diagnostic test indicates the two print heads are good.  If I click 'OK' when the printer gives the alignment fails message. then I can print a document, then the printer goes through the whole ending print head alignment process again with the same failure message.   Any thoughts on how to solve this problem? Thank you.

  C.

  Had the same problem, called technical support and when getting the serial number, I noticed the paper along the back of the printer tray had been dislodged by my son and why the printer not to would bring line with not properly.

  Easy difficulty... heres to hope you have the same problem.