My wireless adapter now works on dial-up?

Similar Questions

• X 61: wireless adapter stopped working at home, work at the office...

  It's the strangest thing. Last night my (Intel Pro Wireless 3945ABG) wireless adapter stopped working at home - I can view all the networks and try to connect but it won't just end connections to one of the networks I could use in the past (my own password protected network or those open).

  Curiously, he does not work in my office, connect to our society, protected wireless network password.

  I tried to uninstall the drivers as well as access to the connections and install the latest drivers - but in vain.

  Help, please!

  Moderator Note: type added to the subject line.

  I don't know if it was AC 5.2 or not (because I just realized that the networks in question were not accessible on my iPhone either) - so I reset my router again and now everything is good.

  Thank you!

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• How to get a USB 2.0 wireless adapter to work on Win7 Ultimate 64-bit?

  Details:

  ASUS P8Z77 - V motherboard w/Intel Core i7 3.5 Ghz 3770 K LK
  16 GB OF RAM
  HWUN4 USB 2.0 wireless adapter b/g/n w/Realtek chipset Hawking RTL8192CU
  Windows 7 Ultimate 64-bit fully updated to include SP1
  It is the second USB card who refuses to work on this platform, the first being something Rosewill which also uses a Realtek chip.
  I checked that the drivers for my MB are up-to-date, verified that I have later Hawking, tried drivers directly from Realtek drivers for the chip and assured that I installed the latest Intel MEI driver package for my motherboard. I went on the USB settings in the BIOS, but I'm not exactly fluent in what the options really are or do. I went through all of this also try to get the Rosewill unit to work several months past, as well, but without success with a device. It is postulated that the Hawking unit is actually Edimax, although I can't find any similar product on the site in order to try the drivers for. I also completely turned off my firewall ZoneAlarm and Avast! antivirus during installation and configuration, for the same results each time. The results does not same are achieved regardless of USB 2.0 ports 10 or if I connect to the adapter for.
  With this Hawking and the previous Rosewill adapter, drivers seem to installs successfully, such properties as displayed in the Device Manager say "this device is working properly", but they do not find a wireless signal. Simply says Windows Network Diagnostics adapter is "problems" and suggests that drivers can be a problem and always indicates that the latest drivers are already installed every time I have send the update to the latest drivers on my hard drive.
  I can come to only three possible conclusions:

  (1) Windows 7 Ultimate 64 - bit is unable to use USB 2.0 wireless network cards.

  (2) Windows 7 Ultimate 64 - bit is unable to use USB adapters based on the Realtek chips.

  (3) my motherboard lacks the correct BIOS settings to fully activate USB wireless.
  I have several other USB 2.0 devices that all work fine on this platform, including cameras, USB keys, external drive docks, mice, keyboards, phones, and others. I googled the days and found nothing to convince me the problem with my motherboard, I can't find anything specific on Win7x64 being a problem with this. Comments on NewEgg and other sites indicate people successfully use wireless adapters USB with Win7x64 and even on the same motherboard, I use, so I have to assume that I have either overlooked something or not yet found appropriate hardware and/or software settings.
  With this post being half-rant and half-cry for help, I will respectfully ask for suggestions on how to solve this maddening problem.

  «I don't mention it in my first post, certainly, but these devices have very certainly works wonders on a laptop with Win7x64 and a desktop computer with WinXPx32 installed.»

  So your previous conclusions are wrong, because they contradict what you are saying now.

  I can come to only three possible conclusions:
  (1) Windows 7 Ultimate 64 - bit is unable to use USB 2.0 wireless network cards.
  (2) Windows 7 Ultimate 64 - bit is unable to use USB adapters based on the Realtek chips.
  (3) my motherboard lacks the correct BIOS settings to fully activate USB wireless.
   
  I wanted to know if the adapter STILL works, not its past history. I have a D-Link WDA 2320 worked in another PC perhaps a year previously, but now it shows in the configuration, and that's as much as I can get with it. A few years ago I had a computer that did not like any wireless device, either PCI or USB and finished by hard wiring it which was very annoying.
   
  OK, back to your...
   
  Go to Device Manager and uninstall the device.
  Then set Device Manager to show hidden devices.
  Remove any instances where the adapter has tried to implement on a USB port
  Remove all instances of the downloaded driver files.
  Restart the computer. There should be nothing about it that the adapter can use more
   
  Then download a SINGLE instance of the pilots approved here. http://hawkingtech.com/products/hawking_products/Hi-gain_wireless_networking/HWUN4.html
   
  According to the manual, you must run the file from the driver before connecting the device to the computer...
  Connect the device and then run the driver file. Restarting after the installation of the drivers and when the computer is back running, connect the device...
   
  If you no longer have the manual or quick setup guide, get from here...
  http://hawkingtech.com/products/hawking_products/Hi-gain_wireless_networking/HWUN4.html
   
   
   

• Can't get usb wireless adapter to work

  I have a desktop dell Vista I'm tryin to get a belkin surf and usb wireless adapter goes to work the map shows the acount wirless is there with full force, but after I typed my password it trying to connect then don't I'm not sure that is a router bit, It's the wall installed by at & t I am not very computer please help

  I have a desktop dell Vista I'm tryin to get a belkin surf and usb wireless adapter goes to work the map shows the acount wirless is there with full force, but after I typed my password it trying to connect then don't I'm not sure that is a router bit, It's the wall installed by at & t I am not very computer please help

  Hey colton0708

  like you don't know anything on the router, I suggest you contact at & t, who provided it

  Walter, the time zone traveller

• Which card wireless adapter for Compaq Presario model # SR5510F?

  I have a HP Compaq Presario model #SR5510F and I want to connect wireless to an AT & T 2-Cable Modem.  I need to know what wireless adapter card works for this model.  Thanks in advance.

  Message edited by morrow on 11/19/2009 05:54

  Which wireless standard using the ATT solution? Any spare wireless card should work fine, just for the game to the network.

  See you soon,.

• How to activate the wireless adapter

  I currently have a HP Pavilion 17 computer laptop with Windows 7 Professional.  A few times in the past in the unit's wireless adapter stopped working.  I don't remember what I did to get it working again, then however at this time I can not activate even if I followed all the steps to change the settings of the adapter on the network and sharing Center.  When I select Connect, it simply shows that it is not connected.  Nothing I have tried seems to help.  I have a unit of Belkin Wi - Fi that works and my laptop runs as long as I have an Ethernet cable connected.  However if I disconnect the cable from the laptop does not connect via wireless adapter.  In the past he would always stay connected to the Wi - Fi connection even if I disconnected the cable.  Please give me any thoughts you had to solve it.  Thanks in advance for your efforts and help.

  I just wanted to know that I found the solution to my problem with the help of a response of the same issue posted last year.  Repeated pressing the F12 key with the picture of an airplane on the wireless card.  Forgive my ignorance, but thanks to all who took time to try to help me.

  OldmanDon

• my wireless does not work when I download the update for Windows Vista (KB2753842) security

  After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

  the fact. When I used a LAN cable I internet connection.
  When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
  The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
  Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
  Thank you.
  Roy

  Thank you very much for your answer.

  I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

  Kind regards

  Roy.

  Hi royhorrobin,

  Please report the problem to the Microsoft Community Forum.

  We will help you solve the problem.

   

  1. What is the brand and model of the computer?

  2. do you get an error message?

   

   

  We would like to tell you that this is a critical update...

  Find information here:

  http://support.Microsoft.com/kb/2753842

  Here are some steps that you can follow:

   

  Method 1:

  Step 1: Restore the system to the United Nations-isntall the software update.

  Refer

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  Step 2: Put the computer to boot, with warning...

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

   

  Step 3: Download and install the update manually to the clean boot.

  Method 2:

  Try to update the Wireless driver and check to see if the same problem happens.

  a. click on start
  b. right click on computer
  c. click Properties
  d. click on Device Manager on the left hand side

  e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
  f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  
  Method 3:
  Also, try the steps from the link below:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
   
  Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?

• Wireless network adapter not working not not for HP Pavilion dv4 - 2020ca

  Hello

  My wireless network adapter does not work after my computer crashed. Here are the details:

  The product name and number:

  HP Pavilion dv4 - 2020ca Notebook PC

  Operating system installed:

  Windows 7 64 bit

  Error message:

  After the accident, there is a message saying that there was an error where a file is not found (unfortunately I did not record the name of file that I felt something time... even the message said if this is the first time my computer crashed I should just restart...)

  Changes to the system:

  I was updating my AVG antivirus software. I left the computer for maybe 10 minutes, and after his return to him, I found that a crashed and showed the message above

  Any help would be appreciated.

  Hello

  Before I got your answer, I restored my computer to an earlier time and now my wireless adapter seems to work very well. I don't know if this computer recovery solution is temporary or permanent, so I always keep an eye on the installations and updates that I do. and if the same problem occurs, I will try the suggestions you have made.

  Thanks for the help

• I was using wireless, but now I can't point sayon top he worked the network unsecured fine thank you with an exclamati

  I WAS USING WIRELESS, BUT NOW I CAN'T TELL A UNSECURED NETWORK WITH A POINT OF EXCLAMATION ON IT AND SHE SAID THAT I'M CONNECTED TO THE NETWORK. BUT HE WON'T LET ME GET ON IT. IS IT SOMETHING I'VE DONE. Thank you.

  Hello

  I suggest you try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  It will be useful.

• No connections avalible on windows 7 with a working wireless adapter.

  That's what happened. I was in a Skype call with my friend and we had a connection error after about 30 seconds. Immediately I thought that it was my internet because my internet was very uneven, lately. After resetting my router and comeing back upstairs, I had the No. are networks avalible on my screen. Initially I thought that the proablem lied through my system services application, because that's where I set the proablem last time I had this proablem. What I did after that was I have activated the service autoconfic wwan and wlan autoconfiguration service. Has nothing. According to what I've done, I went to control panel and pass to solve my adapeter wireless even if it has been enabled and connected. Then I went in my device manager and tried to update the drivers on my adapter wireless by uninstalling it and then put it back. Then I noticed that teredo tunneling Pseudo-Interface was defective. I went to check and saw that he cound not start and had an error code 10: cound device does not start. I went to google and learned how to turn it off, and I did. After that he appeared more in the Device Manager which is ok because I thought that it would fix the internet. He did not.before all this I did a before a "critical update" windows system restore but that also did not help. I started running out of options. Please help me.

  It seems to me, of course, that your wireless network card is toast, no matter what that says Device Manager.  However...

  I didn't ask and you don't mention what you use a wireless router.  Is it possible that the router configuration has changed to the Wireless-N only, Wireless-B only, or some other setting with no Wireless-G?

  Indeed, is it possible that your wireless router has its section wireless disabled or broken?  Do you have any other wireless device that you can use to determine if the router is working OK?  If possible, test with a device near your desktop (it sounds as if your router is at some distance away).

  MalwareBytes AntiMalware (free) is not an antivirus.  It's a scanner antimalware on demand/remover that is intended to be used with an antivirus program.  See https://helpdesk.malwarebytes.org/hc/en-us/articles/201861736-Does-Malwarebytes-Anti-Malware-replace-antivirus-software-

  Similarly, for Windows 7, Windows Defender is an anti-spyware program and not an antivirus (Microsoft makes things very confusing by reusing the same names for different products).

  If these two are security programs only you, your system is vulnerable, and you must install a real antivirus program.  Free offer of Microsoft - Windows 7 - is Microsoft Security Essentials.

  For now, I suggest that you run the ESET Online Scanner (free), but I don't think that malware is the cause of your Wi - Fi connection problem.

  D - Link does not appear to be any drivers for the Rev B of your adapter for what version that went Windows XP 32-bit.  D Link says that you should connect to the Internet using your wired LAN connection and get the driver right from Windows Update.  When you uninstalled and reinstalled the adapter using Device Manager, have you checked the box to delete the driver software?  If this is not the case, do it and then try to reinstall.  You need to be connected by an Ethernet cable in order to re - download the driver from Windows Update.  See http://www.dlink.com/uk/en/support/faq/adapters/usb-adapters/how-do-i-install-my-wireless-adapter-correctly-in-windows

  

  I doubt that D-Link updated its Wireless Configuration Utility for Windows 7, but if that was the case and that you use it, disable or uninstall (check Control Panel > programs and features).

  Other than the above, I'm sorry but I'm out of ideas.

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• NetGear wireless adapter doesn't work is not in Windows 7

  I bought a netgear WG111GE adapter (also known as WG111V3) and has received assurances that it would work under Windows 7. To do this, but only randomly, most of the time I don't receive any connetcion but every now and then he seems to come to life on its own and detects my wireless network. I can't find advice on Microsoft or Netgear sites. Does anyone else have this card in Windows 7 and it works for them?

  Hello

  Welcome to the Microsoft answers site.
   
  I suggest you to uninstall the drivers from the Device Manager NetGear wireless adapter and reinstall the drivers.

  1. click on start, type Manager of devices in the search box.
  2. Goto Device Manager.
  3. click on appropriate network, right-click on the adapter netgear wireless and uninstall.

  Please goto the manufacturers website and download the latest drivers from update.
   
  Please visit the link below.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Thank you and best regards,
  Azam - Microsoft technical support.