Need a simple solution to find the unique address of the printer

Similar Questions

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.

• HP Solution Center can't find the printer.

  I have a C280 and Windows Vista. I worked OK. for years. Now the HP Solution Center would not find the printer. I tried to reinstall the printer, but the problem doesn't go away. I reinstalled Windows Vista and the printer does not have a solution. To reinstall the printer, I used the cd that came with the printer and I also downloaded the drivers for HP Web site.

  I can print and make copies, but I can't get a file after scanning a document or a picture.

  I'd appreciate any help.

  You can try a reinstall of the software HP Solution itself, rather than just the printer drivers.

  You can find a guide for it here:
  http://support.HP.com/us-en/document/c02259020

  You can download the latest version of the complete software of features here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3204464#n191

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• OfficeJet Pro L7590 cannot find the printer in the basic facilities and full.

  The HP solution center software has stopped working recently with my Officejet Pro L7590. The printer is connected to a wired network.  I uninstalled the software, downloaded the latest software to install driver from HP.com.  The operating system is XP. I tried to install the base and full versions of the software several times, do a full uninstall/scrub every time.  No package can find the printer.  I ran the residential network Diagnostic tool and it can find the IP address of the printer very well.  I can access the web page to printer very well.  I've successfully installed the drivers of the company and I am now able to print.  I then tried to reinstall the full version, and it would still not find the printer.  Another pc on the network is the center of Solution HP software installed and communicates very well with the printer. I tried to disable firewall Eset Nod 32 during the install and no change.  I deleted all the entries in the registry I can find for HP, but still can not get the full version of the installation of the driver to see the printer.

  What else can I try to succesfully reinstall the driver package?

  Sorry, you gave the wrong way...

  First of all if you still have Enterprise installed download and important work!

  1. uninstall all other instances of 8.3 or previous.  My recommendation would be to uninstall all software printer hp through Windows Add/Remove Programs if nothing else to start with a base line.

  2. download the Utlities "HP Software Removal Utility - IT professional use only" (don't worry, this stand-a-alone also works on computers). File name: OLProL7X00_Scrubber_8.exe

  3. Once you unpack the latter you will have a new window and down there are 5 files, you must run one at a time in this order.  Uninstall.bat, Unistall_L1.bat, Unistall_L2.bat, Unistall_L3.bat, Unistall_L4.  Make sure that each of them is complete before you begin the following.  Some of them open and close Windows Installer UN and there is a gap of about 10-15 seconds.  Some of them require you to press any key to close the window on the finish.

  4 REBOOT

  5 download if you don't have not already ch from the Solution of Driver - company it, basic features of HP software/driver-IT Professional use only (again it is ok, you want your scanner, printer, monitor, and HP Solutions software to work once again don't you?).

  6 install the filename Business Solution: OJProL7X00_enu_Enterprise_7.exe if you uninstalled all this will install without a hitch, but you may need to input manually by selecting the IP method, enter the IP address of the printer. It's where he then found my network printer, and he continued the installation.  Mine found via the method of IP but not automatic.  Finish the installation and give your computer a few minutes to finish in the bottom.

  7 reset.

  8. If you have a program that uses a scanner TWAIN as Adobe Professional, CorelDraw, etc. test your scanner.  Mine works now.  Leave the test program,

  9 download new version 8.3 software, the full version of all the 311meg of it!

  10. install this software 8.3.  You can get an error (I did) just do not send the report, but the key is the continuous software to install.  What the problem is that the software company alreadly installed a files "hp? 5. ?? "and the cant on write.  The amount of the fine. Now when you get to the point where he asks how you connect your printer, USB or wired/wireless select Wired and click OK.  This will bring you to a new screen that is simular to the last, but to the bottom is a checkbox with "continue with the installation, I'll add the material later.  Put a check mark in the box and click Next.

  Surprise! the Setup will continue installing all recommended software and complete.  Still finished once that there is still things going on in the background! then give him a few minutes to complete!

  11 restart and give a little time and you will see that the screen is the network printer and all software programs now work.

  12. the only thing I don't understand is this: the old software used to create printer drivers 2, one for the printing of paper and other fax directly in applications.  The fax printer driver is no installation/configuration in this method, but I think that the Technical Support HP can guide you through this set up if necessary.  I'll do that tomorrow as it was something that I never thought or missed until it didn't work!

  I hope this helps! It did for me!

  Joe

• InDesign CC packages is more fonts when I need to send a project to the printer

  Hey Adobe team: user for a long time when Photoshop was but a germination. I recently upgraded the Creative Suite 6 to creative cloud and have encountered a worrying problem. InDesign CC packages is more the fonts when I need to send a project to the printer. This meant that I had to completely redo a project on the deadline for a problem I've ever had before. How is - it may help your users? And is there a current solution or should I cancel creative cloud and return to the CS6?

  @OurPlace

  First of all, you do not discuss any team of Adobe. These forums are primarily supported by volunteers who are not Adobe employees and do not represent official Adobe Support.

  That being said...

  He there did nothing specifically with InDesign 9 or 10 (CC and CC 2014) version of InDesign to modify or disable the packaging of fonts when packing for a document. There should be absolutely no different from InDesign (version CS6) 8.

  Troubleshooting tips:

  (1) make sure that you enable the option Copy fonts (except CJK and TypeKit) in the package dialog box.

  (2) make sure that you are not using any ideogram (Chinese, Japanese, and Korean) fonts complexes that specifically never put us in a package.

  (3) fonts TypeKit will not be packaging.

  (4) make sure that your file system permissions are such that InDesign can create all necessary directories and all subdirectories to the packaging operation.

  (5) if the MacOS, exit InDesign and try to force a clearing of your system font cache and restart.

  (6) output InDesign and then find and delete all the files on your system with names of the form .lst AdobeFnt# # being a two-digit number; delete not all the other files that begin with AdobeFnt. Restart, and restart InDesign.

  (7) reset the InDesign preferences that can has been corrupted. For Windows, start InDesign and press Shift + Ctrl + Alt. Click Yes when asked if you want to delete preference files. For MacOS, pressing down on Shift + Option + command-control, start InDesign. Click Yes when asked if you want to delete preference files.

  One of them should nuer or solve your problem. Once again, we at Adobe are not aware of any generic problem with packaging fonts with InDesign.

  -Dov

• Computer cannot find the printer on the network

  I have a Photosmart D110A and use a router Airport Extreme to print from my PC and iPad.  Until a few days ago, it worked fine but now neither my iPad or PC can find the printer on the network.  When I run the test report of network on the printer, it shows that everything is fine and dandy.  No the guided HP solutions even to get close to solving this riddle... it seems that any questions they discuss involve the printer will not connect to the network.

  OK, so they are both on the network of comments.  Comments network does not allow for communication between devices.

  Open Airport utility, select your airport and click installation manual.  Access to the Internet zone, then DHCP.  What are the two structures IP DHCP for your two airport networks (invited and regular).

  For example, mine is 10.0.1.X for the ordinary and 17.16.42.X for my network of comments.

• Printers with/without wire: "printer not found," "Can't find the printer," 'no devices found' (Windows 10)

  If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).

  • Printer not found
  • Cannot find the printer
  • No devices found
  • Your printer is not found on your wireless network

  The solutions include:

  Step 1: Restart the computer, printer and router

  Step 2: Check the status of network and printer connection

  Step 3: Manually connect the printer to your network (only for wireless connections)

  Step 4: Run the HP Print and Scan Doctor

  Step 5: Temporarily disable the firewall on the computer software

• Excel (and PDF) cannot find the printer installed from Windows update - Word may however

  Since the installation of an update for Windows Vista (as requested) last week, I lost some features in a number of programs.  I was able to restore.  Excel Help, when I try to print the printer installed is not found; the same happens when I try to print PDF files, but Word documents seem to find the printer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• scanner can not find the printer hp photosmart 6510 e all-in-one

  I tried all the help and downloads to try that works - I don't have the disk.  Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan.  He says that it cannot find the printer.  I tried to download all the drivers etc from windows, hp Web site.  He says, make sure that it is connected to my computer?  If the printer is connected wireless why my scanner isn't?

  There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance

• Hello help, Mac can't find the printer

  Hi all

  'BonjourPSsetup.exe not supported under OS X' I am puzzled.

  To create a roaming network, I added as an express to my Time Capsule airport and doing so changed the name of the network. (Original name was a little too identifiable) now MacBook WiFi can not find the printer, it allows.  (cause he's probably looking for the former name of network). Went to Apple's support for assistance. Found several posts with instructions. All direct me to download the Printer Wizard Hello.  When I do, I get the above error.

  Also, went to:

  Applications - printers and Scanners - add

  List of shows:

  Name: Series HP Photosmart C4385

  Type: USB

  Cannot change the type of USB to Hello

  SYSTEM-

  El Capitan 10.11.6

  MacBookPro, MacMini, iPad.

  Express connected to the Airport via CAT 6.

  MacMini use USB for printer

  HP Photosmart C4385

  Thanks in advance,

  Mike

  Resolved to my situation. Find the HP original installation disk. Uninstalled and reloaded. Fact

• Satellite A210-171 cannot find the printer wireless

  I have very recently the satellite A210-171 and I am trying to connect a Lexmark x 4580 wireless printer. I installed the disc from the printer and everything is fine but when I come to print wireless computer can't find the printer.

  I have to do something for the computer other than the installation of the disk of the printer.

  Any help would be good.

  Is your wireless network setup correctly? I mean is your wireless laptop printer and your router configured properly and that you have a connection to the internet router trough wireless?

  Please give a better description that you have, if you have a wireless network with a router etc... and how is your configuration if your network is configured with dynamic IP addresses etc...

  Moreover, a little site here´s how to set up a wireless network:

  http://www.Microsoft.com/athome/moredone/wirelesssetup.mspx

  See you soon

• HP Envy 5530: HP ENVY 5530 "cannot find the printer"... impossible to see where I am going wrong!

  Hello

  We just put a HP Envy 5530, set up was fine, I tried installing but get the message "cannot find printer" over and over again.

  I tried to download printing HP and Scan doctor but also, it does not find the printer.

  I ran two reports of diagnoses on the printer, everything looks ok, I have an IP address with an IP address that suggest that it has connected wirelessely, the network report said no problems were discovered.

  I tried disabling my firewall, all made once again, still nothing.

  I put the IP address in the address bar, but it does not open!

  I don't seem to have a printer/USB cable witht the printer so I can't tey wireless - I one of them, it was a new purchase?

  I don't really have an idea what to do next, it seems I have a printer connected to the network, your laptop to talk to the network but nothing to talk with each other. I also tried to find the printer with my IPad, but he also could not find a printer.

  Any ideas, im really frustrated

  Thanks in advance

  Hello

  They are on the same Beach, they should be. Now please reset it and try again

  1 reset the printer

  b press settings (wrench),

  (b) press tools then use the arrorw down to access page 2/3,

  (c) touch Restore Factory Defaults - wait a few minutes

  2 reinstall the printer

  (a) you can use the CD, but it will download the file and may take ages to download. Please download the software and the following drivers

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

  (b) turn on the printer,

  (c) right click on the downloaded file and select run as administrator.

  d select Wireless and then follow the instructions on the screen.

  Kind regards.