Network and 1536dnf HP Laserjet scan to folder

Similar Questions

• Scan to folder is not accessible

  My HP 8500 recently packed.  I uninstalled the printer from control PANEL and manually delete the SCAN TO FOLDER I had configured on the DESKTOP computer.

  I then bought a new HP8600.  The 8600 works very well with scans for designated folder, etc.

  My problem is that I continually get an error in my bar of STATE SYSTEM, informing me that the "SCAN to FILE IS NOT ACCESSIBLE".  I'm guessing that some system calls are made in the background looking for the old 8500 SCAN on FILE that was on my desktop.

  Can someone help me with this please

  Hi doughheads,

  I recommend to open Add or remove programs in Control Panel and make sure there are only installed nothing yet for the 8500 JO.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• Multifunction LaserJet 1536dnf printers: can scan on Yosemite on a laserjet 1536dnf MFP

  I have a laserjet mfp 1536dnf which can scan using a Windows 7 machine, but five users running Yosemite 10.10.3 cannot scan to it. We can print to it. Macs until recently were able to scan.

  I removed the printer and downloaded and installed the most recent driver many times and when I open HP Scan it does not recognize the printer.

  Any suggestions so I can scan again are appreciated.

  Hi happydog89,

  Do you mean that the printer does not appear as a Hello printer to add in the windows printers and Scanners?

  Usually this would cause network problems, if you cannot add the printer as your Hello.

  The access point must support multicasting, which allows to turn Hello to work and you'll also be able to scan. The multicast must be enabled on the router. If your are unsure how to do this, contact the router company.

  Please hold me.

  Thank you.

• Scan to folder installation network - Win VISTA Home Premium

  Printer is HP Officejet Pro 8600

  When I try to install the Scan to folder network on a desktop computer running Win VISTA Home Premium Web page displays the message "Internet Explorer cannot display the webpage".  There is no option to continue anyway.   Under Tools > Internet Options > security all parameters have a default value.

  On my old laptop under Win XP SP3 and newer laptop running Win 7 Home Premium, when I run the analysis of the installation of the network folder, I have to continue, and then configuration page will become available.   Under Tools > Internet Options > security settings are set to default.

  I'm curious to know why I can't have analysis of screen network on Win VISTA Home Premium system folder but I can do on both other systems?  All three computers are on the same home network.

  P.S. as for the Scan to E-mail Wizard, which gives the message that this option is not available on my printer, however on the touch of 8600 printer screen option is there and he tells you how do it.  Scanning to Email app also allows me to scan to e-mail.

  Initially this feature was not mentioned on all models of the 8600, just the models more and premium that you note. However, due to the overwhelming popularity of this HP feature published scanning to email app for the majority of printers who have access to web services.

  I hope that answers your question!
  

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• OfficeJet Pro 8600 N911n scan to folder gives "system failure."

  We have an Officejet Pro 8600 N911n and we set it up to scan to folder, but it gives an error "system failure."  Rights have been given and file is shared with all the rights and even tried using the admin account and still the same error.  They had a different printer configuration a year or two there has been no problem.  Here is the screenshot of the error.

  I see that a FW update for the 8600 JO is available on the HP support site.    By chance, it is a point made in this update?    I tested a network folder today and it worked fine.   Have you tried other folders as well?

• OfficeJet Pro 8500 A910 will not scan to folder - Windows 8 Pro

  I upgraded my HP M9500Y PC from Windows 7 to Windows 8 Pro.

  My printer is HP OfficeJet Pro 8500 A910.  In Windows 7, all the functions of print/scan/fax worked perfectly.

  Windows 8, printing without problem, however, analysis of the file function fails.

  When a document is scanned, the printer seems to be analysis correctly, but the destination folder contains a file of length zero with the new file name.  I tried the formats PDF and JPEG scans.  All attempts to produce files of length zero in the destination folder.

  I tried to change the path of the destination folder by replacing the address IP for the name of the PC, but that made no difference.  The destination folder is shared correctly on the Windows network and the configuration utility based on the web of HP for the digitization of records indicates that all tests have passed.

  What is the sequence of installation for Windows 8 will accept scan-to-folder operations.

  Hello

  You have the latest firmware installed on your printer?

  http://support.HP.com/us-en/document/c02830943

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Windows does not remember to connect to my network and I have to manually connect whenever I turn on the system.

  Why my computer changes from my home group without doing me something?

  Whenever I turn on my computer, I have to open network and sharing Center Center to REMIND my computer how to connect WiFi network to?

  Hi Martin,

   
   
  1. What is the operating system installed on your computer?
  2 did you change on your computer before the show?
   
   
  I suggest you to follow the steps and check if it helps.
   
  Follow the steps and check if that helps.
   
  (a) will begin.
  (b) type run in the search box (if you are using Windows XP click Run) and open it.
  (c) type "services.msc" and then open services.
  (d) scroll down to "wlan auto config" right-click, then click on stop the service
  (e) now go to
  "C:\ProgramData\Microsoft\Wlansvc\"interfaces"everything in this folder, leaving only a folder called 'profiles' delete and delete everything in the folder"profiles"with the exception of a folder called"interfaces"delete everything in the folder)
  (f) restart "wlan auto config" by following steps 1 to 4.
  (g) to connect to your wireless network,
  (h) enter your password (make sure that the connection is automatically checked)
  (i) restart your computer

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• home network does not, want to uninstall network and reinstall.

  just need help complete steps to completely remove the existing network between 2 computers to office and then create a new network. a few simple steps broken down would be very appreciated.

  You don't "delete" a network.

  What seems to be the problem?

  See if the related assistance here .

  Or check out these standard MVP Malke tips:

  The best and simplest is to buy a wireless router. In this way you
  get Internet connectivity both machines and the added benefit of some
  more security between you and the Internet. Next, you set up your wireless network
  network in any security, and then you configure file/printer sharing. Below you will find
  information on the implementation of a router and also in networking. It looks like
  long but don't be intimidated. Setting up a router and local area network
  sharing between two computers takes about 15 minutes.

  Configuration of the router.

  Setting up a router is simple enough. Normally, you run the CD that came with
  the router and follow the instructions. If you're running Vista may be the
  CD that came with the router does not work; I do not know this. But you can set
  the router without the CD. Note that if you have Internet, cable for the
  connection you just put the router to DHCP (or there may even be a)
  cable choice to choose). If you have DSL Internet, you generally
  Select PPoe and enter the username and password you chose during
  initially setting up the DSL connection. So:

  1. turn off the power to your cable modem.
  2 set a course of ethernet cat5e cable (usually supplied with the router)
  the port of the router to port Internet/WAN modem ethernet cable.
  3. connect the CAT5e cable from your computer's network card ethernet cable
  one of the ports on the router. If you do not have an ethernet cable
  (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples
  given are for a Linksys router. Check the manual for your router or router
  site Web de MFTR. for the parameters by default if you don't have a Linksys. Open a
  browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (this is by default the router address IP, who)
  varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is left
  Blank and the Linksys default password is "admin" without the quotes. Come in
  This information. You are now in the configuration of the router utility. Your
  utility of configuration may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new
  password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Enter it again
  password to confirm and click Save settings at the bottom of
  the page. The router will reboot and show you the box of connection again.
  Do not fill in the user name and put it in your new password to return in the
  configuration utility.

  Now, click on the link wireless at the top of the page. Change the wireless
  Network name (SSID) default to something you will recognize. I have
  suggest that my clients do not use their surname as the SSID. For example,.
  You may want your "CastleAnthrax" wireless network name or the
  as. ;-)

  Click on save settings and when you get the prompt that your changes have been
  successfully, click the wireless security link which is just next to the
  Wireless settings link base (where you changed your SSID). If you have a
  Newish computer, you will be able to affect the Security Mode
  WPA2-Personal. Do this and enter a password. The password is what you
  come on all the computers that are allowed to connect to the radio
  network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you are using
  to configure the router normally goes for a wireless connection, unplug
  the ethernet cable and wireless of the computer should see your new
  network. Enter the password you created to join the network and launch
  Surf.
  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on file/printer
  Sharing in Vista. Contains information about sharing printers and files
  and folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the network on all machines (see Setup Wizard
  caveat in section A below).

  Problems sharing files between computers on a network are usually caused
  (1) a misconfigured firewall or neglected (including a stateful firewall
  Firewall in a virtual private network); or (2) inadvertently running two firewall such as the
  Built-in firewall of Windows and a third-party firewall; and/or (3) not having not
  accounts of the same users and passwords on all computers in the workgroup; (4) try
  to create actions where the operating system is not.

  A. configure the firewall on all machines to allow the local area network (LAN)
  traffic as being approved. With the Windows Firewall, it means which allows file / print
  Sharing on the Exceptions tab normally run the Network Setup Wizard on
  XP will take care of this for these machines. The only "witch hunt" is that this
  lights on the XPSP2 Windows Firewall. If you are not running a
  third-party firewall or have an Internet Worm antivirus «»
  Protection' (like Norton 2006/07) which acts as a firewall, then you are
  fine. With a third-party firewall, I usually set up the allocation of LAN
  with a range of IP addresses. E.g. would be 192.168.1.0 - 192.168.1.254. Of course, you
  substitute your correct subnet. Do not run more than one firewall. DO
  NOT DISABLE THE FIREWALL; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This
  is from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not have
  must be connected to the same account on all machines and passwords
  assigned to each user account may be different. accounts/passwords just
  need to exist and to match on all machines. DO NOT NEGLECT TO CREATE
  PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to start directly
  on the desktop (a particular user account) for convenience, you
  to do this. The instructions on this link work for XP and Vista:

  Configure Windows to login automatically (MVP Ramesh) -.
  http://WindowsXP.MVPs.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off
  Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not home users sharing
  directories or files of program, but you can share folders inside those
  directories. A better choice is to simply use the Shared Documents folder.
  See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a)
  files between machines), if you want to share a printer connected
  locally to one of your computers, share it to this machine. Then go
  for the mftr printer Web site. and download the latest drivers for the
  correct system. Install them on the target machines. The
  printer must be collected during the installation procedure. If this is not
  install the drivers, then use the Add Printer Wizard. In some cases,.
  Some printers need to be installed as local printers, but it's outdoors
  This response.

• Network and sharing Center could not load the

  Questions:
  -Network and Sharing Center: Page failed to load
  -Unable to connect to internet, but says that it is connected to a network (have three PCs in net)
  -Guest of the continuous window - "problems and reports no longer."
  -By opening system in Control Panel, said the "Installer could not load display.

  It's the question driving me crazy... Anyone had this problem before?

  Hi kyungturner,

  Please use the forum for Support of Vista,

  You have anything installed recently? It sounds like the system could have a corruption.  Save all your data prior to perform a clean boot to further diagnose the problem:

  http://support.Microsoft.com/kb/929135

  If the clean boot does not work, try a SFC scan to repair system files:

  http://support.Microsoft.com/kb/936212/

  Let us know if this helps solve the problem, Kevin
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.