Network discovery will not

Similar Questions

• Network discovery will not turn on

  I run Windows Vista. Last January I couldn't use my home network. I found this discovery of the network, file sharing, etc. have been disabled. I tried to turn them back on in vain I tried all the stuff. Except one! When I disabled the Windows Firewall, the discovery of the network, file sharing, sharing public folders, the share that is password protected, printer sharing BUT NOT switched back. But it is unwise to remove the firewall. Does anyone know a way to fix this? PS, internet works fine.

  Mel

  Hello

  1. what exactly happens when you try to enable network sharing?

  2. you get any error message?

  3. what security software is installed on the computer?

  When you create an exception or open a port on a firewall, you allow a particular program send information to or from your computer through the firewall. Allow a program to communicate through a firewall (sometimes called unblocking) is like opening a tiny door in the firewall.

  I suggest you follow the given steps and later a update on the State of the question.

  Network connection problems: http://windows.microsoft.com/en-in/windows-vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing: http://windows.microsoft.com/en-in/windows-vista/troubleshoot-file-and-printer-sharing

  Select the file and printer sharing: http://windows.microsoft.com/en-in/windows-vista/enable-file-and-printer-sharing

  More information: Printer network problems: http://windows.microsoft.com/en-in/windows-vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-risks-of-allowing-programs-through-a-firewall

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-a-port-in-Windows-Firewall

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Network discovery will remain not or active.

  Hi W7 Home premium works very well for a year, since I boutght the PC. It acts as a server of the domestic network of small data size and various PC and devices connect to wireless

  No more - network discovery is now off and I can't next turn to the. This seems to be a well documented problem with a lot of different slkutions, what work. The most common advice given is to verify that the following services are started and set to automatic - they are!

  Computer browser

  DHCP client

  DNS client

  Function Discovery Resource Publication

  Network connections

  Network location awareness

  Remote procedure call (RPC)

  Server

  TCP/IP Netbios support

  Workstation

  If I disable Windows Firewall - network discovery automatically returns to be on without any intervention. Turn on the firewall W and discovery network turns off automatically.

  I use Microsoft Security Essentials, which does not solve the problem when it is turned off.

  WIndows is up to date (according to the update of Windows).

  I've already lost hours on it - as someone has any ideas?

  Thank you

  Hi Vinod

  Update on this - it is now resolved and discovered the network working again. I think I must have had some malware which services were adapted so I ran the following
  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  as stated in one tech groups. The Firewall behaves now as you suggest.
  Thank you for pointing me in the right direction.
  Rgds
  Mark

• Network discovery does not 'on' when selected and recorded, all the answers?

  I have some very annoying problems with my new network set up.

  My network consists of a Belkin router type "n" (model F5D8236-4v2), the main PC with windows 7 32-bit OS, a wireless laptop XP, a machine of the PS3 and TV (model KDL 32EX403 =) Sony Bravia - hard wired to the router.

  I want movies stream from my PC to the TV. laptop and PS3.

  My PC (the principal server) see the laptop, TV, but not the PS3. He can see the files on the laptop and the laptop you will see the PC it cannot access any files or folders on the PC.

  The TV can not see the PC, laptop or PS3.so no films can be heard of these components on television.

  I tried everything that Microsoft and several forums have to offer, but to no avail.

  One thing I noticed when trying to find a configuration to mitigate the problem, it's that when you go to "Advanced sharing settings" and try to change the setting of 'Network discovery' on IT, and then save this setting, it is up to the STOP after trying to save.

  Please can someone help I'm quickly running out of hair to pull.

  Thank you

  Hello

  We will first try to turn on network discovery in Windows 7 for you to do:

  Go to: Control Panel---> Administrative---> Services-(search for SSDP DISCOVERY)---> right click Tools 'SSDP DISCOVERY'---> go to---> Set auto properties

  STEP 2: Control Panel---> administration tools---> Services-(search for the HOST of the UPNP DEVICE)---> right click 'HOST de UPNP DEVICE'---> go to---> Set auto properties

  You should be able to turn on network discovery

  Restart all of your devices, including your router.

  Let us know the progress

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Wireless network adapter will not install on Windows XP Pro-life said a wireless network card is disabled.

  I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro.  Said A WLAN card is disabled.  What?  I don't know what that means.  What can I do?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Also check with Skylink® support site for more information about the issue.

• 8500 A909a-network installation will not continue because of error USB

  Try to install a network printer on a Workstation Windows XP 32 - bit virtual (MS Hyper-V).  Even if I choose network installation, the software stops after checking the system requirements because there is no available USB port.  There is no other choice to avoidance (because I do NOT want to install anything USB).  The only choice is to cancel the installation.

  Message edited by tsg on 07/09/2009 18:03

  Problem solved.

  Solution is the same as in the thread linked to above, except that the file to modify is autorun_network.inf instead of autorun.inf.

  1. Open autorun_network.inf in Notepad.  This file is located in the folder root of the installation CD or the folder where you extracted the driver you downloaded from HP (if using the CD, copy the entire CD to a temporary folder on your hard drive to allow the edition)
  2. Search for "[SystemRequirements]."
  3. Add the line 'MinUsbReady = 3' anywhere in the section [SystemRequirements]
  4. Close Notepad and save the file
  5. Run setup.exe, select install network and it will ignore the USB control

  Thanks to Mr. Richard Wang for the solution.

• My documents mapped network drive will not work...

  Hello world

  Here is the problem I am facing lately...
  I have a Win2008 R2 Server with some shared folders... Now on my Win 7 PC, I did the following...
  Mapped to a network drive on cmd as: net use x: \\server\folder
  Next: I have changed my location tab the folder My Documents (My Documents C:\Users\Current) the path to X:\ and recorded...
  After that, I went back to cmd and removed the mapped drive: net use /y /d X:
  FYI: I have a kind of software that maps the letter x: on my win7 pc whenever I connect to him so he can accesed from different people. 200% working...
  I created a new user to the server, so the \\seerver\folder will be shared and accessible only from this user...
  Results: Location on my documents tab not shown... redirect works DO NOT... the files are now saved @ C:\ and not C:\users\current my documents
  Any suggestions...?
  Thanks in advance!

  Hello

  The question you posted would be better suited in the Server Support. I suggest you send the link.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
  Hope this information helps you.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• Satellite L300-135 see WLan network but will not connect

  Well well, (new laptop) initially, it worked with my BT hub at home... then decided to not stop working - receives no signal or response from the router - even though other laptops in the House can connect without any problems

  and now the Wireless does not work - IE. I can see the wireless connection but cannot connect.

  I don't know that the wireless is not cut (until someone suggests)

  I looked for more up-to-date drivers, but nothing seems to work.

  Help, please!

  Hello

  First of all, you should check if your wireless network card is correctly recognized.
  I mean to check in the Device Manager!

  Your wireless network card must be the Realtek 802.11 g (RTL8187B)
  Download and install the latest driver WLan in the Realtek page.
  Then update the BIOS.

  Finally, reconfigure all WLan settings.
  In the Device Manager-> properties-> Advanced tab card WLan disable energy saving settings and check the other parameters that may affect the connectivity.

  Good luck

• HP Officejet Pro 8610: two printers on the same remote network model will not be printed, but local will be

  I have two furniture stores that are run on a windows sbs2012. Recently, both off my all in printers are down in the same week. The first was at the location where the server is actually housed. I bought a HP Officejet 8610 and managed to put in place without problem a lot via a wired network connection. So I decided since who went to buy the same model for my remote which is also connected, but it has a wireless access point. I was not able to get anything to print from my main software called profit systems. I can get things to print to the shared remote drive. I tried uninstalling and reinstalling, but even if connected as long as administrator I get a error that reads "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. I put it up as both just and redirected network and it shows it as ready in the State, but after it clears the queue that nothing prints. I checked firewall settings and all with HP is checked on. I'm pretty computer but I am full of ideas. Help, please!

  So after that I lost two days of my time and more than two hours of my time of I.T. guys it came to our attention that the driver IS NOT SUPPORT this model of HP JO 8610 redirected remote office printing! HP really, really?  So we have to install the driver 8600 on the server and local computers to get things to print. Problem solved, but it's just sad that this was the problem.

• Network Assistant will not connect pc to the LAN, but connect to the internet properly

  My main PC had been connected to a local network of four PC but abruptly dropped from the network.  I can connect to the internet OK, but the wizard does not reconnect me to the local home network.  I read other articles on test and checks and everything seems to be okay, but when I check my network places other computers are running and are not displayed.

  Try the following and see if it helps:

  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW

• The taskbar network icon will not appear

  Hello

  I've been a happy user of Microsoft since the start I have a simple question to ask something I've ever met in all my years of computers.

  Anyone here play TES4: oblivion? Well, I am a modder and I was just modding and wanted to install Windows Vista Service Pack 2, I closed the CS, closed my Xfire cats and installed the service pack, I have TV near my computer and I just watched television, as it is installed.

  Well, I use routers and I need to know my internet connection, notification of networking in my taskbar has disappeared!

  I went to the "Properties" of my taskbar and I see the 'system' icon and it let me just check clock, not network.

  How can I fix it?

  Ryan

  And my problem was gone the next day when I turned on my computer. I didn't do anything I know, always interested in an answer, but...