Network drives disconnect randomly on PC in Win7

Similar Questions

• ReadyNASOS 6.4.0 - T136 (beta 4) - network actions disconnect randomly

  After you have installed the latest beta version of ReadyNAS (T136) my network shares are randomly falling sporadically.

  Model: ReadyNAS 102

  SW: 6.4.0 T136 Beta 4

  Network connection: CAT6 Ethernet

  -Tired of changing the cables, always randomly disconnects

  -Tired another port on the router, always randomly disconnects

  Protocol: AFP

  Any suggestions? I'd be happy to send the log files. I am not versed in the Netgear ReadyNAS log files, so I haven't looked at them.

  Which firmware you would update go?

  What version of Mac OS X you are running?

  Yes, send logs (see newspapers of sending a link in my signature).

• Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

  I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

  Hi Jack,

  Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

  Thanks again

  Greg

• How to get the dialog box 'Disconnect network drive' with command shell in WIN7?

  I know, when I run the following shell command can get the dialog box "map network drive".

  RUNDLL32 SHELL32. DLL, SHHelpShortcuts_RunDLL connect

  But what is the command to get the dialogue box "Disconnect network drive"?

  Thank you!

  Hello

  Thank you for visiting Microsoft Community.

  I recommend you post your questions on the TechNet Forums for the best and expertise advice. See the link below or more information:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

• External drive USB disconnects randomly

  Hello

  I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

  The Mac mini is always on and I use the disks USB as server provided the network disks.

  I have Seagate Enterprise drives in the world.

  I get the following output in the Console:

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

  22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

  22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

  22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

  22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

  22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

  22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

  What is going on?

  HARD drive fault?

  Not pregnant?

  Damn Mac mini?

  I thank very you much in advance!

  He could be sleeping?

  Could it be overheating?

  Have you tried swapping the cables yet?

• OfficeJet Pro L7580 appears as a network drive in Win7

  I have a new Dell with Win7 64-bit desktop computer.  I installed the printer with last full 64 bit HP software program downloaded from the HP website.  My all-in-one L7580 load on my network as a hard drive.  When I click the link it reports: "LOCATION is NOT AVAILABLE.  Z:\ is not accessible.  An unexpected network error has occurred. "When I right click on the link and select 'Properties', it displays the properties of a typical hard drive and not the properties of a printer.  When I right click on the link and select "Disconnect", it switches off this "Z drive".  L7580 functions perfectly whether or not I let this "Z drive link" in my network list and if I choose to disconnect the drive "Z".  At this point, it's just a boring anomaly.  However, I have a Lexmark Black and white on that same network laser network printer and the Lexmark does not exhibit this behavior.  I have a small home network (cable modem, router 4-port Netgear with two computers and these two printers plugged into the router 4 ports.)  The router assigns the two printers IP addresses and I can connect to the web page internal to each printer with its information and settings just by entering their respective IP addresses in my browser (192.168.1.x).

  Just curious to know if one of the members of the technical forum have some ideas about this anomaly.  Can live with it, I won't if I don't have to.

  I don't think that it is an "anomaly". IIRC, the printer has memory card ports. So when you install the printer software, network drives are created as a reference for the memory card slots. They will appear even if you have all the cards inserted. Even if you remove them now, they will reappear after you restart the PC. All I can suggest is to ignore it.

• Disconnected network drive

  Hello, I installed a Windows 2008 (replacement of a Server 2003) domain server with 5 customers Pro XP. There is a login script that is managed by the workstations when they login to map network drives.  Who is pulled from the server.  On the workstations, when they connect, in my computer, it shows the actions, but they still have the name of the old Server 2003, that is to say the Scans on Windows 2003. I removed the actions of the workstation and restarted. Now, the disks are delivered by saying drive disconnected network (letter): on each of them.  I can click on the drive and it opens upward, but the name never changes. Some people have suggested to turn off saving to the card mode NETWORK has done this. Some have suggested to make you that netlogin is set for automotive services, done. A one of the machines, I've removed the NETWORK card and let windows re - install. That solve the problem of this machine.  Others, however, are always challenging.  At present, the firewall is disabled. No installed antivirus for the time. Any suggestions?

  Thank you!

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Why my network drives mapped reconnect when disconnected from my laptop?

  Whenever I have withdraw my machine it fails to reconnect to a network drive while you are using the wireless. It's quite strange, because if I anchor again it not is not even reconnect on LAN.

  Hi gabrielcervatiuc,

  Connected and disconnected are two different hardware configurations.

  Therefore, you use control different sets in the registry. You must configure the network drives in two configurations.

  Hope this information is useful.

• NETWORK DISCONNECTS RANDOMLY, I READ EVERYTHING HERE AND NOTHING WORKS, PLEASE HELP ME! :(

  Lenovo G510
  Intel core i5 - 4210M
  Windows 7 ultimate
  Broadcom 802.11n network adapter

  For almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
  It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
  I had a lot of reading the forums on this topic and found nothing to work up to now
  That's what I tried:
  -everything is on maximum performance
  decliques-i 'allow the computer to turn off this device to save power ".
  -disabled some 'ip helper' in services
  -check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
  -verification of updates of drivers, it says I have the latest version
  -fully scanned the laptop for viruses and none has been detected
  n ' install any programs lately that could cause this
  -network, signall is excellent

  And still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
  If no help pleaseeee? I noticed that it happens to many other users also.

  If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.

  Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.

  Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.

• Sync up indicates disconnected network drive

  When I start my computer I get a message in sync "of the disconnected network drive."  What can I do to connect by car?  I ran the software for viruses and malware.

  Thank you for your response.

  Yes, I solved the problem (at least I think).  After that reading more about disconnecting network drives, I followed a suggestion to double-click on the drive, and it is connected.

  If I find that this has not solved the problem, I intend to follow your suggestions.  Thank you.

• A computer on Win7 Home premium able to map a network drive on a computer in a different domain?

  A computer on Win7 Home premium able to map a network drive on a computer in a different domain? Or is this a limitation of the home premium? In addition, the computer I have tries to map running Win7 ultimate.

  If I am not mistaken (I reserve that right!), Home Premium cannot be joined to a domain and the OP also indicates to gain access to resources in a different domain. Thus, according to trusts in place or VPN connections, it could be a challenge. Where did the idea of using something easy of access/sharing of resources.

  Otherwise, you need to set the resources to allow access of the anon/no authenticated user.

• connect a network drive on netowork with 7 & xp?

  I am running Windows XP home sp3 on my laptop and my desktop was win7 there is an external hard drive that I want to be able to access from XP just as easy with 2 PC win7?

  Hi paul3200,

  You can follow the procedure below the link that has the steps of how to connect it and disconnect a network drive in Windows XP: http://support.microsoft.com/kb/308582

  You can also check out the link below: create a shortcut to (map) a network drive:http://windows.microsoft.com/en-US/windows7/Create-a-shortcut-to-map-a-network-drive

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse continues to disconnect randomly

  span / / p
  With the help of OS Vist, my husbands mouse continues to disconnect randomly.  He has reinstalled the drivers, did the computer repair.  He changed the mouse to a new with the same result.  It has also changed the cables autour and she always does on other ports.  It seems to be a problem with OS rather than material.

  Problem solved (for me). Resolution-Wrecked TWO mice! Bought again the machine and we like that. I will never use two mouse at the new!

  Question answer.
  Operating system: Win7. (Even if the previous user, the question was under Vista).
  Question started: yesterday. 23 / Feb / 2010.

  Hello, my name is Royce, I have a problem with my mouse on Windows 7.

  Question: The mouse turns off randomly, I hear the device disconnect sound, then the sound of connection device. It disconnects all all three to six seconds, and the mouse power light turns off during this disconnect. I suspect my internal USB Hub is powered off, but do not.

  Cause: I had two mouse plugged in at the same time, so a friend can have control of the screen with me. In a few minutes, this problem started.

  Tried to fix it: I uninstalled the mouse driver, tried different ports, updated windows, different mice, taken the battery out of the motherboard, reset the bios and even entered in DeviceManager and ensured that all usb hubs do NOT go to power saving mode. I don't know what else to try, but then again I'm not all that known with Win7.

  When you first start my PC, the mouse will be OK for about 20 seconds, then the problem is getting worse and worse. If I don't move my mouse, I don't hear the disconnect sound, but it is perhaps more than that.

  When the mouse goes off, I think I can use my keyboard. The CapsLock light is wrong, so I suspect that the keyboard does not meet this problem. Oh, and all of my devices are USB2, so it's all modern. My PC is new, built the House. It's a machine fast quad core with a lot of power to the usb2.

  Help, please!
  Royce Barber

• EliteDesk 800 35W G2: G2 EliteDesk 800 35W network driver problem

  Hello

  We have a new EliteDesk 800 35W G2 phone in our office.

  In order to obtain compatible drivers, that I'm wrong.

  The one you suggest the latest network drivers for "G2 HP EliteDesk 800 35W.

  Network driver: Intel (r) Ethernet connection (2) I219-LM

  Pls share me the source for Windows 7 x 64.

  Thanks in advance!

  Pen

  Amala

  Was having the same problem for weeks. Finally found a driver that works with the boot image (6.3.9600) - found on the Lenovo site but works on HP EliteDesk 800 G2. Used download Win7/8.1. No other driver seems to work - get the blank screen because you do not have a work CARD driver (press F8 for CMD and run IPCONFIG).

  http://support.Lenovo.com/us/en/downloads/ds105362

  The driver version is 12.13.17.6