network name plus a number

Similar Questions

• Printer wireless network name recognition

  I have an all-in-One of C4795 printer, on Vista 64-bit, which can not connect again ATT Uverse router. The router has been replaced and printer identifies the old network name/number. I tried everything the HP web site offers, but nothing worksI. At some point in the implementation I find the new name/number and I printed the report of NetworkTest wireless and it shows the old name/number. Help! Joe C.

  Hi Joey1969,
  
  Follow these steps in the document below. Let me know if you need help.
  
  http://goo.GL/jXYCw

• Sync Center stops the error: the specified network name is no longer available

  Original title: stops Sync Center sync every time there is an error?

  The error is still "the specified network name is no longer available." Sync stopped with offline files. So I hit ignore and restart the synchronization. This happens about every minute during synchronization. I'd rather just complete synchronization what it can that stop all the time and I have to restart manually. Anyone knows any solution or what does the error message mean?

  I had a similar error.  This seems to be a function of the indexing of offline files when you synchronize a large number of files.  By temporarily disabling indexing of offline files, you can synchronize all your files and then re - activate the indexing.

  To disable indexing, clear the checkbox 'offline files' under control panel > Indexing Options.  Then synchronize as usual and re - activate when you are finished.

  I hope this helps.

  Original title: stops Sync Center sync every time there is an error?

  The error is still "the specified network name is no longer available." Sync stopped with offline files. So I hit ignore and restart the synchronization. This happens about every minute during synchronization. I'd rather just complete synchronization what it can that stop all the time and I have to restart manually. Anyone knows any solution or what does the error message mean?

• Change network name

  When I change the name of the network should I reconfigure all printers on the network?

  Potentially, Yes. If your printers are wireless, then you will need to reconfigure with new wireless network name to connect.

• HP Pavilion M4-1002TX: network name not displayed in my HP pavilion m4-1002TX

  Hi you

  Really need your help. My lappy since there are 2 weeks unable to connect on behalf of the office network. The name of the network is invisible. Connection are available but not connected. I tried all the HP PC, troubleshooting wireless network and internet in vain.

  I have no idea right now. Some laptop HP with the same model at the office have a same problem.

  Other network name are appear in the list & also can direct connect using the usb cable.

  Please help me.

  OK after the reset of the modem the network name does not always show upward?

• How to change network name on Time Capsule

  Hello

  I want to change the name of the network on my Time Capsule, to match that of my home, all other routers network so I can use it as an access point more easily.

  How should I do it under OSX?

  Thank you.

  Open Airport utility, click on the Time Capsule icon, then click on modify in the window pop up.  Then go to the wireless tab, network name can be changed here.

• New ThinkPad T460p just arrived - the product name and serial number missing from the outside of the machine

  This page shows where the product name and serial number should supposed to be on my ThinkPad: https://support.lenovo.com/us/en/find-product-name?cid=EDM_2016_NA_US_PP_SUPPORT_V2&RRID=1014681098&...

  However, any of these are displayed on the outside of my machine anywhere.

  I happen to know the product name and serial number. I was able to find other ways - that is not the issue. As far as I know, these physical labels should have with the machine.

  Was it simply a mistake during Assembly, or Lenovo just stopped putting on these labels? If the first case, is there a way to ask Lenovo send me these labels? If the latter, Lenovo might consider updating the page linked above.

  Any inisight would be duly appreciated.

  Nicholas

  My T460p shows the T460p at the bottom right of the screen and the serial number and the code of the product under the battery. But the T460 is very dark on the corner of the screen, and Seraglio/product numbers appear on the very dark black label under the battery.

• When I connect the computer says there is not a configuration, the name or serial number

  I have a HP Pavilion dv7-3165dx Entertainment Notebook PC, running Windows 7. When I log in, it says that he does not know the configuration, the name or serial number. It also doesn't let me back up my files.

  What should I do to let him remember who he is?

  I work out of my house and use it daily. It allows me to open a session by bypassing the initial screen.

  Thank you

  Margin

  Hi Jackson,.

  Looks like you need to restore.  Have a look here and follow the steps and please let me know if this helps.

• Name and phone number attached to every comment I make on facebook

  Hello, I noticed that whenever I have comment on a message or photo on facebook that my name and phone number is added, much like a signature. How to stop what is happening please?

  You will need to request support from Facebook. Nothing to do with Microsoft.

• Network Name (SSID) Found failed is the message that I received after the test run. Cannot access my printer.

  I can't print my coupons to my email... ran a test and it say network name (SSID found) fail... but it says that the printer is ready and online?

  Hello

  1. don't you make changes to your computer before the problem?
  2. what operating system is installed on your computer?

  Please follow the steps in this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/wireless-printer-goes-offline-with-a-message/d83e6dcd-AF35-4e55-9516-47944e70a125

• 2 separated registered photos with the same name of file/number.

  How can I separate 2 or more photos with the same name of file/number. Consult us in the case that I see a photo and when I open it I see a different picture. The second photo is not the case in the folder, but still I need to save. It seems they are crushed.

  How can I separate 2 or more photos with the same name of file/number. Consult us in the case that I see a photo and when I open it I see a different picture. The second photo is not the case in the folder, but still I need to save. It seems they are crushed.

  =============================================
  FWIW... If a picture was crushed (replaced), it is unrecoverable.

  Are you saying that the vignette does not match the full size photo?

  How_exactly_are you look at one picture?

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• NET USE error: '67 system error has occurred. The network name cannot be found. »

  Original title: NET USE worked for error.

  OK I used the following with a RDP'ing of XP in a server of S2k3 years:

  NET use lpt2 \\SERVERNAME\printername /persiternt:yes

  now, I get a "system error 67has has occurred. The network name cannot be found. »

  What made me state was I restarted my XP machine.

  What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...

  suggestions?

  Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Network names

  I have a router Linksys E2500.  Is it possible to have a network name for the secure network and a different network to the network of comments name?  The idea is to not have the SSID of the network broadcast while allowing the SSID of the network to be broadcast.  With the convention of adding just "invited" by the end of the SSID of the network, it beats the security option do not have secure network broadcast SSID.

  Unfortunately, many have asked again this feature was never implemented.

• Laptop WiFi problem, «identifying...» (network name) ».

  Hello
  I'm having a problem with the wireless on my laptop. Its a HP Pavilion dv6000 and just under a year of age. I had no problems with the wireless until recently. I use the laptop at home and usually the internet is very well (apart from the occasional disconnection), but when I'm at school do frequently connect to the school network (I am a student of the University, and there are several routers throughout the school and in the many buildings). Sometimes it will connect in one building and I'll switch to another and it does not connect. Each time, he does not connect it always says "identifier...". (wireless network name) ». No amount of repair, restart or reset the network card it won't connect. The strange thing is that sometimes it connects to the router in this building (i.e. library) and sometimes it won't. Whenever I have check the status shows that the laptop is received but does not send do not.

  Help! This problem is really starting to annoy me and I don't want to end up throwing my laptop on the whole of the library.

  Hello

  1st brand one Restore Point so that you can return back if necessary (it shouldn't be though).

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Do another restore Point then you can go back to where you were if necessary with new active pilots.

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  I would like to delete ALL networks, so you can restore if necessary.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.