New wireless adapter

Similar Questions

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• HOW TO MAKE A RESTORE OF THE SYSTEM ON AN XBOX, I JUST BOUGHT A NEW WIRELESS ADAPTER AND I CAN'T SEEM TO MAKE IT WORK, HELP!

  I HAVE NO IDEA WHAT DO, I READ THE BOOKLET BUT NADA, HELP!

  Hello

  You can perform a restore to factory default on an X - Box.

  However the restoration is not a magical solution for everything that happens on a device.

  Read the instructions and try to install the adapter again.

  https://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=977641

  http://www.Xbox.com/Hi-in/support/xbox360hardware/troubleshooting/accessories_troubleshoot/wirelessnetworkadapter-troubleshoot.htm

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I can not connect my Smartphone to my connectiion of Wifi computers via my wireless adapter

  It worked fine until I put in a new wireless adapter. I am sure that in my attempt to reproduce the configuration/connection of my cell phone Wifi signal with the new wireless adapter

  I was not able to make it work? I'd appreciate any help. Thank you

  Hello

  1. is detected in Device Managerwireless adapter?

  2. what happens when you try to connect to your phone?

  3. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Turn on the Windows Firewall temporarily off the power and check.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  Method 3:

  Try the steps in the following Microsoft article and check if it works.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope the information is useful.

• New 5 Ghz PCI wireless adapter for dv9438ca?

  My new 5 GHz router creates a mismatch... can I buy a new 5 GHz Mini PCI wireless adapter for the following PC...?

  HP Pavilion dv 9000 CTO Entertainment notebook computer PC

  Model # dv9438ca

  Prod. # GL887UA #ABL

  [Personal information]

  It was delivered with... Part # 441090-001... Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz of bandwidth of operation...

  I want to install any compatible which will allow me to access 802. 11A or 802.11n at 5 GHz

  Please & Thanx

  Beauvaidos

  [Personal information]

  Maintenance and Service of Guide available on this link, I don't see a N Wireless internal that is compatible with the BIOS on this laptop... You will need to get a USB external, if you need to connect to Wireless N

• New N600 adapter unable to connect to EA3500 wireless smart router

  I replaced a wireless adapter G from Linksys with a Wireless-N N600 USB adapter on my desktop PC. The new N600 adapter installs OK, the computer can see the EA3500 network router, but the two cannot connect.

  What's wrong?

  What should I do?

  Help! I need to use this machine soon.

  None allowing to uninstall the adapter.

  It's been long since I worked with xp. You should do a Google search for "manage windows xp wireless connections."

  If I recall it right click on the card and select Properties. There should be a Wireless tab that lists the connections.

• I have recently reinstalled Windows 7 and now I have no option for wireless connection and wireless adapter is not (wireless connections do not show up when I go to set the new connection)

  I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.

  So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.

  Thanks and + karma to one who can help me solve this problem.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• New HP Elitedesk 800 G1 - no wireless adapter?

  I have a HP EliteDesk 800 G1 nine compact PC running Windows 7 - code H5T99EA. It does not have a wireless adapter - certainly none appear in the profile of Harware.

  I can only connect to the Internet via an ethernet cable. I have no option to connect wireless and my wireless router is not discovered when I try (or any other local Wi - Fi access point.

  Do I have to download a driver for the wireless card - no doubt, there is one installed?

  Thank you

  John

  Is an optional scheme, see the specification page 4.

  Integrated Intel® I217LM Gigabit network connection; available wireless LAN card

  http://www.HP.com/hpinfo/newsroom/press_kits/2013/HPDiscover2013/HPEliteDesk800_datasheet.PDF

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Satellite L850-18 t has problems to connect to new wireless router

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  Posted by luka_10
  

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

• On Satellite 5200 wireless adapter

  I have a toshiba satellite s5200 701 has he got a wireless adapter

  Hello

  Stefan is right. Your device must be ready WLAN. I found the news than Toshiba 802. 11b Wireless LAN Mini PCI Card (PA3212U-2MPC) is compatible with your device.

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Wireless adapter has disappeared on my Satellite C660-22V

  Hi, I am very well to this new and have knowledge on this SUBJECT.

  The situation is, my computer had a problem turning on and the opportunity to restore to a previous point in time, that I continued with. After the completion of this and that the computer opens completely, the wireless adapter is no longer meet!

  I tried to look in the network and sharing Center, there is no option for a wireless adapter, only one ethernet adapter unplugged.

  I also looked in the Device Manager and I cannot find any mention of the wireless adapter, I expected to be there with a yellow icon, that means a driver problem, but it is not there at all!

  The laptop is a Toshiba Satellite C660-22V

  Thank you!
  Tom

  > I also looked in the Device Manager and I cannot find any mention of the wireless adapter, I expected to be there with a yellow icon, that means a driver problem, but it is not there at all!

  What devices appear in Device Manager under the category network cards?
  Is any unknown device visible?

  To my knowledge, this Satellite C660-22V has been fitted with a 802.11(b/g/n) of Realtek RTL8188CE WLan card.

  For installation of the driver Realtek RTL8188CE WLan should help to make it work (of course, just in case a missing driver would be the problem)

  By the way: what system are you using?

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?