NFTS.sys of blue screen on reboot after uninstalling McAfee VirusScan Plus

Similar Questions

• Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

  Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

  Hi all

  I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
  A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
  STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
  AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
  I couldn't find anyone with the same problems. Can you help me?
  Thanks in advance,
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• Qosmio F20 blue screen of death after stop

  Hello

  I get the blue screen of death after a stop on my laptop Qosmio F20.

  The error is IRQ_NOT_LESS_OR_EQUAL.

  I guess that's somehow connected to the tv tuner card.

  I tried to restore the system - not good. After the restoration for some time, it was OK. But then again appeared BSOD.

  Sometimes, it also appears when I connect USB hard drives or even when I insert the DVD disc.
  And for shure every time I stop to laptop.

  Anyone have any ideas?

  Hello

  This is my personal opinion;
  I think it's a memory problem!

  Why, because it of very difficult to reproduce this error message and it looks like this BSOD happens without the use of hardware or special software

  I have gogoled for this error message and I had a lot of success!
  I read in various forums on this issue, and especially a fault memory has been one reason why the BSOD appeared.

  But someone suggested to disabled the pagefile... Probably, you should check out these tips:
  http://joelmama.com/2006/10/16/Windows-XP-BSOD-error-IRQ_NOT_LESS_OR_EQUAL/

  Good luck

• Compaq Elite 8300 AIO: Blue screen on reboot of the system after sysprep

  After syspreping the computer to restart the computer, I have BSOD (blue screen) with the message:

  STOP: 0x0000007E (0xFFFFFFFFC0000005,...) without any additional information on the driver

  the image works perfectly before syspreping, I know that it is a driver issue, which should be removed after the generalize in the sysprep, I don't have a wireless network card

  Thank you!

  We always using ghost to deploy our image but we have different models, I always use the latest model that we receive to capture my image. The sysprep command is supposed to cleaning drivers and drivers from a defined location will apply depending on the model.

  without knowing the pilot originally, I tried to change the drive (from an operational model) but the same result, my graphics card is built into my motherboard.

  I solved the problem by replacing the folder: "c:------windows-system32-drivers" coming from an old image of operation.

  But I have to watch on my file sysprep to see why it does not consider my drivers folder and use than the windows folder

• vista blue screen of Windows after load of desktop?

  Receiving blue screen blocking after which penetrates windows on news environment it gives is stop: 0x0000008E aoddriver2.sys address: 9E2B1D76 base at 9E2AD000, Datestamp 4f13d4fb can someone tell me what is a way to fix it?

  Hello

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen of death after running the update from microsoft.

  Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
  It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:

  Dell Precision T7500 workstation

  1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500

  1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500

  1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500

  1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500

  1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision

  1 421-1993 Windows 7 Downgrade RLOB

  1 430-3434 PCIe 10/100/1000 NETWORK CARD precision

  1-313-7458 data DVD 16 x - ROM only Dell Precision TX500

  1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB

  1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude

  1 power supply 330-3555 Precision T7500

  1 330-3156 documentation, English, Dell Precision

  1 power cord 330-3157, 125V, 2 M, C13, Dell Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500

  1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500

  1 shipping material of 330-3569 for system Dell Precision T7500

  1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude

  1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.

• Blue screen of death after installing Windows updates that are automatically downloaded

  My computer got up until I get the blue screen whenever I try to install a Windows Update automatically downloaded.  The list of updates pending installation are KB978207, KB974470, KB971644, KB972270, KB905866, KB960362 and KB890830.  The first time that I have updated I just had the system install 7 all at the same time.  I got the blue screen and the computer may not restart normally.  Made the system restore and I tried to install each update one at a time.  7 all finished by gives me the blue screen with no reboot successfully after one of them.  I don't know what to do next.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Blue screen on startup after installation of service pack 3

  Original title: big problems with Windows service pack 3

  My pc runs xp edition media with a processor intel dc. I had to reformat using recovery discs cleaning all ok using microsoft update until after that load successfully and the installation of Service pack 3. Start theres a brief flash of B.S.O.D. then it goes straight to load the page option of safe mode. Startup journal raises a whole series of errors. drivers of not start tearing my hair on it!

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  If your ntbootlog is display messages «Is a not load driver...» ', this does not necessarily mean that a problem...

• WRkrn.sys causing blue screen failure

  Sorry if I am posting this in the wrong section, it's more a software problem...

  My brother-in-law bought a Dell Inspiron 660 s return in 2012 from Best Buy, so he came with already installed Webroot (I don't have the product keys or codes for this). Provided with Windows 8, but he has since upgraded to Win10. He contacted me to watch for him because I work in it. Apparently, he did an uninstall (not sure how he did it) and the driver "WRkrn.sys" seems to be leftovers. After a Windows Update the computer restarted and now it goes to the dreaded blue screen of death. Until he comes to blue screen, the Dell logo comes and below it says "Prepare the automatic repair" I don't even have the chance to hit F8 to try to get safe mode. Then it goes to the blue screen that says: "your PC/device needs to be repaired. The operating system could not be loaded because the critical system driver is missing or contains errors. »

  File: \\WINDOWS\System32\drivers\WRkrn.sys

  Error code: 0xc000007b

  You will need to use recovery tools (it has the drivers & disk utilities and who cannot start). I looked at this file and it is related to the Webroot antivirus.

  Press ENTER to try again (does nothing)

  Press F8 for boot parameters (goes to another blue screen with options that do nothing)

  Press ESC for the parameters of the UEFI firmware (which brings me to the BIOS).

  Then it goes to the blue screen if I tap F8...

  

  NONE of these options no matter what. They all bring back me to the blue screen of death origin. So I can't even in safe mode to try to delete this file. The only thing I can do is get into the BIOS. It doesn't have a recovery disk, one disk with what he came is software & disk utilities (cannot start to that). Can someone help me with this please? Especially trying to get into safe mode in order to remove this driver and do not have to treat more than Webroot. Thanks in advance. Sorry for the pictures on the side.

  I just wanted to someone else having a similar problem and SpeedStep know that was NOT a hardware problem. The hard disk was not corrupt. It's just a bad file WRkrn.sys (a Webroot anti-virus software). I saved money by starting in mini Windows XP using Hiren boot CD, renamed this file corrupted, restarted in Win10 successfully with no blue screen and then uninstalled Webroot. Problem solved.

  But thanks for your suggestion.

• Satellite A215-S4757 blue screen & startup failure after HARD drive partitioning

  I just bought a Satellite A215-S4757 a week ago & I tried to divide my hard drive coz, I was only one partion (250 GB) using acronis disk director.

  After that I got the blue screen and now I failed to start and I tried all the options to repair my windows or load in SafeMode to no avail coz it crashes just from the window of microsoft corporation.

  I tried to reinstall windows vista with the cd but still does not!
  pls someone helo me :(

  Hello

  Creator of disc of Acronis does not for me but I know for sure that you can split the capacity of the HARD drive into two partitions with rendering recovery DVDs. Start your laptop with recovery DVDs and check the option to install it.

  You must have a mobile US model. I am from Europe and I don't know about you how it works with the recovery media in the United States, but it should be similar to the European and because of that it must be an option to divide the capacity of the HARD disk with two partitions.

  Please try again. It should work somehow.

• Skype causes Blue Screen of Death after a while in a call.

  Hello, I am currently having a problem with my Skype where it will make my computer BSOD after a while in a call, it only occurs during Skype calls, not during other communications programs of voice as the voice of steam call and the blue screen is more likely to happen when I'm in Firefox.

  The blue screen error I get is "clock interrupt was not receieved a secondary processor in the time interval allowed."

  Any help would be appreciated.

  I did clean install applicable drivers and even tried to Exchange pieces of equipment (including the negotiation on an old CPU and RAM value) and no change.

  Fortunately, a solution to the problem, which has been swicthing on Google Hangouts. They work much better because there is no decrease in performance, even streaming, has more features and does not cause a blue screen after a couple of hours.

• Satellite L300D c000021a (PSLC8E) blue screen on startup after win7 64 bit

  Hello

  The error code on a blue screen after startup (after loading win7 logo) is:
  STOP: c000021a {fatal system error}

  Installed Win7 Ultimate x 64.

  My bios version is 1.80

  Someone has any idea how to solve this problem?

  Thanks for help

  Have you tried to install the original preinstalled Toshiba system using the recovery disk to check if the same BSOD error appear?
  If this is not the case, do.
  This BSOD can be linked either hardware or software problem and good work and pre-configured system could clarify the situation.

• Blue screen issue started after the warranty more

  Hi I bought a HP laptop and exactly after the warranty period, there is a problem.

  And provided HP customer support a lot of drivers to install but not working.

  Seems that if we extended the guarantee we will get the right driver to install.

  My previous laptop was HP, so I got another. and now, I shall not repeat this error.

  Any soln for blue screen.

  Kind regards...

  Depends on the blue screen.

  You are able to write code for the blue screen error?

  BSOD (Blue Screen Of Death) tend to be caused by software problems, so there may be an easy solution to the problem. However, they can also be caused by serious hardware problems that may be more difficult to correct. In all cases, we will need the code error to determine what went wrong.