No cuando escucho audio estoy en pausa y avanzo frame an image

Similar Questions

• Captivate audio does not pausing in LMS after relaunch of bookmarking.

  My background is in Captivate 5.5.  I have audio attached to each slide and each slide contains a button 'Next' text to pause the slide at the end.  We use SumTotal LMS.  The course works very well if you start and complete it in one sitting. If I close and favorite of my place, then relaunch the course will begin where it left off and slides a break to the "next" button, but continues to go to the audio. "" I looked it up and down on both sides and that you can not solve this problem.  Several users have had this problem.  Any help would be appreciated I need to get this on-line course.

  Rod,

  Thank you very much!  I added the audio slide by slide and I at the beginning of each slide.  I will try to move a tenth or two out.

  I appreciate the help.

  Terry

  CID:[email protected]

  Terry Bradford

  Supervisor, Global Learning Center technology-based learning

  AGCO

  Tel. + 1 770: 232: 8095 Fax + 1 770.813.6140

  4570, green river Parkway, Suite 140

  Duluth, GA 30096-2563 USA

  [email protected]<>[email protected]>

  www.AGCOcorp.comhttp://www.agcocorp.com/> blog. AGCOcorp.comhttp://blog.agcocorp.com/>

  Facebook.com/AGCOcorphttp://www.facebook.com/AGCOcorp> twitter.com/AGCOcorphttp://www.twitter.com/AGCOcorp> youtube.com/AGCOcorphttp://www.youtube.com/AGCOcorp>

  CID:[email protected]

• Audio does not pausing at the end of the slide

  Hello world. Captivate 8 using, version 8.0.3.290, 10 Windows.

  Have a problem with the audio in a project where the user progresses to the next slide by using the next button. However, we recorded audio outside Captivate, saved as MP3 and dragged and deposited the corresponding MP3 files in the slides in the film.

  We presented the project preview and audio is not a break at the end of the slide and wait for the next button to be clicked. Instead, he continues to audio for the next slide. How to stop doing this?

  

  

  Thanks in advance for any help you might be able to offer.

  Be sure to leave a small space after and before each audio clip in the slide. This way Captivate will not hold account is a large audio file distributed over several slides.

  Another tip: don't compress to mp4, if you import audio clips to Captivate but keep the original wav files. Captivate will compress to mp3 at the time of publication. Look in the library, you'll probably find that Cp has created a wav from your mp3 file.

• Bug (?) in preview (audio) in 2015.3 (13.8) - Audio looping when you use option frames skip

  Can someone confirm a new bug with audio playback while previewing? It seems to happen when you use the option to skip frames. This causes the audio preview loop after a few seconds, even if the video preview continues to run curly.

  It happens to me on Windows 7 and 10. The audio is a .wav file.

  The more I do the amount of frames ignored, more audio looping section becomes, so try affecting executives jump 5 for the most obvious result.

  Memory and cache purging does not solve this problem.

  This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

• Audio and video synchronization minus 1 frame?

  Hey everybody,

  I have a problem, I don't perform to synchronize audio and video. There is a difference between the voice and video on less 1 frame. How to synchronize the least 1 frame?

  Thx for your back,

  Clément

  Select 'Audio-units of time' in your timeline. It contains the definition is located in one of the boxes of your timeline - depends on what version or PrPro you use.

• How to capture audio only video or only when you import images from the camera

  When capturing video from a camera with a firewire cable the encoding screen does not give me the possibility to encode the video alone or only audio, I have to encode them both together. Ive used previous versions of first and he always gave me the option to encode only one. I can not even see the option to separate them, but the system I cannot select this option. Sometimes I just need to capture images, I don't need the audio, it feels like a waste of space. IM using first Pro CC. Thank you!

  Very well.  If you capture HDV I don't think you can separate the data stream.  I think you did during DV capture.

• Slideshow pause the mouse over the image using muse?

  I know that this is a feature of Dreamweaver.  Is it possible for a viewer to stop a slide show in Muse?

  Is it also possible to have ToolTips appear on the images in the slide show?

  Take a look at this thread - http://forums.adobe.com/thread/1212148. With respect to enabling ToolTips for images on a slide show widget, you can set the HTML title element (which would produce the ToolTip when you hover your mouse over a slide) for the surrounding divs around the images via the context menu of the image of hero-> properties to edit the Image-> ToolTip.

  Thank you

  Vinayak

• In Movie Maker, I want to place a photo on a part of a video without stopping the audio from the video.

  It's all in Windows Movie Maker (Windows Vista)

  Example:

  First of all, I want to have a video (with audio),
  change photo (with audio video) and then continue to the same as before (with audio) video

  I have a video with audio.
  I want to put an image instead of the Visual part of the video.
  But in doing so, I want to still the audio from the video to play while the image is on the screen.

  Please help me, I need the answer as soon as possible.

  Hi benlach,

  Welcome on the site of Microsoft Windows Vista Community.  I suggest you try these methods

  Method 1:

  1. drag a copy of the video on the audio / music.

  2. her completely to the left on the track.

  3. right click / Mute the Audio track... now the audio will be separated from the video but still play correctly.

  4. divide the video and to delete an article of the same duration as it turned again.

  Method 2:

  1 divide your video clip on each side of the area where will be the stills.

  2. now... drag the part cut on the audio / music. BTW... If you want to add a second 5 again... Remove 5 seconds of the video clip. (Info below on the separation if you need)

  3. slide your shots yet to the time line and drop them to the location where you have removed the video.

  4. the Audio clip on the audio / music can be dragged to the right or left to adjust its position.

  Info on splitting...

  "Split a Clip in Movie Maker 2.1"

  1. drag the video clip on the timeline.

  2. play the video/audio by clicking on the 'Play' button under the display screen.

  3. you will see the playback indicator (vertical line) to move forward on the scenario.

  4. click on the "Pause" button at the location where you want to cut and type... CTRL + L or click the "Split" button at the bottom of the display screen. (You can also make adjustments by dragging the playback indicator)

  5. as the many coves that you want and delete unwanted items by right click / Delete.

  And... Movie Maker 2.1 shows that all of the other images. To see all the pictures of Movie Maker 2 shows you all-other-frame. While you are editing project, Movie Maker Vista displays each image. It is generally not a problem ignoring middle managers, but sometimes you notice a flickering image in a clip that is a "stray", and you can not see or cut it out. If you apply the Slow - Down - half video effect to a clip in the timeline panel, see you then each image rather than everyone. You can see the frame problem and separate out. Remove the effect of the clamp to return to normal.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I interrupt audio on the slide when the user selects the wrong answer

  Hello world

  I tried to find a way to pause audio into a slide when the user does NOT click on the click box.

  I put a text caption, an audio file (1) and click box that has an audio (2). The user must choose a suitable location on the slide, if they err, a legend, failure, which includes an audio object (2) is displayed. The problem occurs when the user wants to answer the question before the end of the audio (1). If they get the right answer that's fine, but if the answer is incorrect, the two audio files overlap. I have a recon, I'm looking for a solution where audio (1) is paused or stopped if the user gets the wrong answer. Could someone me referring to the best way to overcome the problem?

  Why not replace the slide with an Audio statement audio play on enter for the slide?  And then you will need a box of extra click that covers the entire slide, under the present click box and attaches an action standard success him "Stop audio triggers. No legend of failure, nor the fact that for this second click box.

• Audio dropout during playback timeline

  Hey everybody,

  I dug through these forums and unless I completely forgot I have not found a solution to this problem. I have listed my configuration below and then have stated the issue I am experiencing.

  mid-2011 iMac 27-inch

  Intel Core i7 3.4 GHz

  16GB 1333 MHz DDR3

  AMD Radeon HD 6970 1024 MB

  Running Mac OS X Lion 10.7.5 (11G 63)

  Is currently working on a portable 1 TB G-Technology G-DRIVE via FW800.

  Work in Premiere Pro CS6 Version 6.0.2

  Editing a sequence with settings:

  1920 x 1080 23.976fps (also tried in a timeline of 29.97 FPS with the same question)

  Working with images that are 23.98 FPS

  Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files detroit to a 5 d Mark 3.

  The issue I'm having, during playback, the audio is competely desexcite. The video will continue to play on fine but audio quit completely. All audio levels down as well in the audio mixer panel meters so it's really lost all communication with my audio layers in the timeline panel.

  I read in other forums to enter the Finder and delete the .caf, re open Premiere Pro, wait for them to be recreated and then continue. I tried this approach with no luck. Removing the .caf doesn't change anything. Audio is always stall as I try to play through my calendar. The only way to recover the audio is to pause then press play again. I have 5 total audio channels with only 2 of these active channel.

  Any ideas on what's happening would be greatly appreciated. It's incredibly frustrating must export a video just to be able to look through.

  I had the same problem when going from FCP to premiere the other month. Indeed, it was incredibly frustrating. In my case I solved keeping my projects and the cache on the system drive (Documents/Adobe/Premiere Pro/6.0 on a Mac). Did not have audio since dropouts. I guess maybe that's a similar problem to you that you are working on an external drive. Now try the media and assets on the external hard drive, but the project on the system drive in the default location of Adobe. Good luck!

• Progress bar when audio plays on a slide with the button

  Hello

  I use 6 Captivate.

  I have a zipper opening for my demo that introduced the demo. This slide contains 1-3 minutes of audio. On this slide, I have a standard button named 'Start', that the learner must click Start the demo (which is on the next slide). I also have a PlayBar with rewind, Play/Pause, Back, Next buttons and Audio.

  Once the project starts, the Play/Pause button on the playback bar turns into mode 'Play '. This, I believe, is an expected behavior because of the presence of the 'button '. However, it causes me problems because, if the learner clicks on the 'Play' button (instead of the start or next buttons) after the end of the audio to the slide of the opening, the progress on the playback bar bar moves for the duration of the audio, so that nothing changes on the screen.

  Is it possible that I can:

  1. Move the progress bar with the button Play/Pause in "Pause" mode when opening, slide audio playback and switch to 'Play' mode once the audio ends? In this case,.

  a. If the learner pauses the audio by clicking Pause and then click on Play, it must continue with the audio.

  b. If the student click on the play button after the audio ends must take sound to the next slide.

  2. turn off the Play/Pause button so that the learner will not click on it?

  I don't want to hide the PlayBar on this slide as I want to give the Rewind option to the learner so play the audio again if he / she wants.

  Anthony

  A colleague found an easier solution than the one I was talking about earlier.

  He just moved the point to pause the start until the end of the slide button. Now, the progress on the playback bar bar moves with audio and the Play/Pause button passes in "Play" mode when audio stops at the end of the slide. On clicking the play button, the project will move to the next slide.

• Audio no longer works

  I have Windows 8 running on a Dell computer.
  Audio stopped working in email (Thunderbird). The image is fine--is no sound.

  You mean Notification sound?

  If so, visit this link

  • https://support.Mozilla.org/en-us/KB/how-customize-new-mail-sound

• RAW audio plays Viewer?

  I've never heard of audio during playback of the XAVC or raw images in RAW Viewer. I thought he just couldn't do that, but now I wonder: is it supposed to and I just set it up? On the same images, determination and first read the audio very well. Using OS X 10.9.x 2013 Mac Pro.

  Thank you.

  No Yes No audio, but the audio willl be there on an export.

• Problem update of audio units plug-ins

  Yesterday, I did a record with my audio interface Focusrite Saffire and logic without problems. In the evening, I tried to open logic without any audio interface connected, but it froze on the image of opening with the text: "update of audio units plug-ins.

  I also tried with my other interface, Behringer X 32, and I had the same problem.

  I already deleted Macintosh hd/library/audio/plugins/content plugins, but I still have the same problem.

  I tried to also disable Core Audio; Initially, it worked, then now it doesn't open at all.

  Does anyone have a solution for my problem?

  Thank you

  MacBook Pro 15, OSX El Captain (10.11.1), 2.5 GHz Intel core i7, 16 Gb 1600 MHz DDR3, 1 TB SSD. Logic Pro X 10.2

  Make sure all your plugins are updated to OS X 10.11 and OS X is running 10.11.1.

  http://finalcutprox.guru/support/supportblog/

• Sansa fuze: show covers audio books

  I would like to see the covers of my audio books on my rocket. I put a jpg file in a subfolder of audio books where the audio book is stored with the the same base name as the audio files. But now the coverage will be shown. I have to use a special naming or the jpg format convention in order to Show up on top of the "rocket"?

  Audio books can display just like any audio file.  Just be sure that the image is not too large.

  Here are a few videos.  This first one is about how to add album art in MSC mode , and this one is specific to the use of the mode MTP.

  When it comes to simplicity, I use MTP mode mainly, I like Rhapsody and Audible, and this means that the MTP mode for transfers.  MTP mode has advantages and disadvantages, but transfer album art is certainly a plus.

  Let us know how your project!

  Bob